Blue88Comanche Posted October 31, 2017 Share Posted October 31, 2017 Wanted to share Nickintimefilms latest creation. At the title states it’s the REM V2 clock panel. The fit and finish is perfect, couldn’t get much better than it is now. It has a ton of features that carry over from the previous versions. It can also read the TCU and show data such as current gear, speed, and MPG. But seeing as I currently only have a manual tranny I don’t get those features. But if you are interested in Gallons Per Hour you are covered. Currently I’m using engine coolant temp, RPM, GPH, and voltage. The clock is awesome as well. New adaptor is on the left, old on right Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Jeep Driver Posted October 31, 2017 Share Posted October 31, 2017 I will say...........that kid is a frickin' genius. Link to comment Share on other sites More sharing options...
MeanLemons Posted October 31, 2017 Share Posted October 31, 2017 This is awesome. I may look into getting one Link to comment Share on other sites More sharing options...
Pete M Posted October 31, 2017 Share Posted October 31, 2017 holy crap! Link to comment Share on other sites More sharing options...
fiatslug87 Posted October 31, 2017 Share Posted October 31, 2017 That is great. That's what I wanted but couldn't hold out so I have the regular Monitor II v3. I bought two more diagnostic port connectors from Nick and added a wired female cat5e connector to a blank switch plate in each of my trucks so I can easily move the monitor from truck to truck. Link to comment Share on other sites More sharing options...
HOrnbrod Posted October 31, 2017 Share Posted October 31, 2017 Wow, that is nice. It has just as much functionality (if not more) than the factory OBD1 monitoring system with a display at your fingertips. Link to comment Share on other sites More sharing options...
87MJTIM Posted October 31, 2017 Share Posted October 31, 2017 26 minutes ago, HOrnbrod said: Wow, that is nice. It has just as much functionality (if not more) than the factory OBD1 monitoring system with a display at your fingertips. Does it make you want to buy a Renix now to have the monitor? Link to comment Share on other sites More sharing options...
MeanLemons Posted October 31, 2017 Share Posted October 31, 2017 All I know is that I feel fortunate that I have a renix and got rid of my OBD1 MJ Link to comment Share on other sites More sharing options...
HOrnbrod Posted October 31, 2017 Share Posted October 31, 2017 4 minutes ago, 87MJTIM said: Does it make you want to buy a Renix now to have the monitor? No. Link to comment Share on other sites More sharing options...
HOrnbrod Posted October 31, 2017 Share Posted October 31, 2017 7 minutes ago, MeanLemons said: All I know is that I feel fortunate that I have a renix and got rid of my OBD1 MJ That probably is all you know Lemons. Your moniker does describe your truck too. Link to comment Share on other sites More sharing options...
Skorpyo Posted October 31, 2017 Share Posted October 31, 2017 I've been wanting one of these for a while, but it seems like he's always adding something more amazing into it. Unfortunately I also have a sweet Prime4x4 panel to go into that same spot so if I got one it'd be a conflict of what I do with the Prime4x4 panel... Choices Choices... I'll hold for now anyways as the $$ to go into the MJ just dried up for a while... Link to comment Share on other sites More sharing options...
MeanLemons Posted October 31, 2017 Share Posted October 31, 2017 1 hour ago, HOrnbrod said: That probably is all you know Lemons. Your moniker does describe your truck too. If life give you lemons, let's make lemonade out of it.... might as well as make it mean. Link to comment Share on other sites More sharing options...
Blue88Comanche Posted November 1, 2017 Author Share Posted November 1, 2017 I've been wanting one of these for a while, but it seems like he's always adding something more amazing into it. Unfortunately I also have a sweet Prime4x4 panel to go into that same spot so if I got one it'd be a conflict of what I do with the Prime4x4 panel... Choices Choices... I'll hold for now anyways as the $$ to go into the MJ just dried up for a while... Can’t get enough switches lol, I have 2 prime 4x4 switch panels on my center console Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Minuit Posted November 1, 2017 Share Posted November 1, 2017 I've been following his progress with these for a while. To say it's a very impressive piece of kit is a huge understatement. Link to comment Share on other sites More sharing options...
87Warrior Posted November 1, 2017 Share Posted November 1, 2017 That is an awesome tool and looks very well thought out. Thanks for sharing. Link to comment Share on other sites More sharing options...
Skorpyo Posted November 1, 2017 Share Posted November 1, 2017 11 hours ago, Minuit said: I've been following his progress with these for a while. To say it's a very impressive piece of kit is a huge understatement. No kidding, when I stumbled on his FB page I was astonished at what he was doing. I took a few digital logic courses back in college and I'm still lost following some of his work. I wonder what he does for a day job... my company is always looking for smart people... Link to comment Share on other sites More sharing options...
87MJTIM Posted November 1, 2017 Share Posted November 1, 2017 11 minutes ago, Skorpyo said: I wonder what he does for a day job..... I think he works on his Jeep XJ. I started following him on Youtube for repairs and modification to the Jeep before he started the REM videos. Link to comment Share on other sites More sharing options...
Dzimm Posted November 9, 2017 Share Posted November 9, 2017 On 11/1/2017 at 10:47 AM, 87MJTIM said: I think he works on his Jeep XJ. I started following him on Youtube for repairs and modification to the Jeep before he started the REM videos. Ive also been following his channel for a couple years and I doubt that's his day job. He doesn't post content often enough to be a job and doesn't have the views/subscribers to afford to live off YouTube yet. He's got to have a real day job doing something... Just don't know what... Link to comment Share on other sites More sharing options...
87MJTIM Posted November 9, 2017 Share Posted November 9, 2017 If he is not doing computer programming, then he is missing his calling. He could go work for the Gov'ment. There's an agency at Ft. Meade, MD we like to call No Such Agency. They're always looking for people with technology skills. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now