watchamakalit

Is there a way to find out where the truck was originally sold? And what is code: NHQ- transmission heater Is that a cold weather option? My build: https://r.tapatalk.com/shareLink?url=https://comancheclub.com/topic/8033-finally-found-onenow-it-has-a-new-floor/&share_tid=8033&share_fid=53169&share_type=t

Thats probably the case for many of us. Lol My build: https://r.tapatalk.com/shareLink?url=https://comancheclub.com/topic/8033-finally-found-onenow-it-has-a-new-floor/&share_tid=8033&share_fid=53169&share_type=t

Amazon still sells round ones to fit cj style headlights. But I havent found any retangular ones new. My build: https://r.tapatalk.com/shareLink?url=https://comancheclub.com/topic/8033-finally-found-onenow-it-has-a-new-floor/&share_tid=8033&share_fid=53169&share_type=t Edit: Found them Search ebay for "headlight stone guard" https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F274105317107

Can confirm Pete. https://www.cjponyparts.com/resources/jeep-wave-calculator My build: https://r.tapatalk.com/shareLink?url=https://comancheclub.com/topic/8033-finally-found-onenow-it-has-a-new-floor/&share_tid=8033&share_fid=53169&share_type=t

Awesome. Thanks My build: https://r.tapatalk.com/shareLink?url=https://comancheclub.com/topic/8033-finally-found-onenow-it-has-a-new-floor/&share_tid=8033&share_fid=53169&share_type=t

Ended up with a pioneer MVH-X390BT. Really pleased with it after using it a bit. Just finished the solid axle swap in the front with the CV shafts. Found out my passenger unit bearing was shot so I replaced it. Used national seal #471763 for the passenger side seal. Worked great. Also changed the frint crank seal trying to stop the leaks. Looking like a pan gasket and rear main seal are in the future. Added a dash cam also. It was a christmas gift but kinda like the peace of mind added should something happen on the road. My build: https://r.tapatalk.com/shareLink?url=https://comancheclub.com/topic/8033-finally-found-onenow-it-has-a-new-floor/&share_tid=8033&share_fid=53169&share_type=t

'88 Jeep Comanche SWB Olympic addition Originally: 4.0l, 5sp., 2wd, d35 Build date: not legible Now: 4.0l, ax-15, np231, d44, d30 161,000 ish original miles Located in NE IN. Mods: Chevy drop shackles 3" front lift pucks Core 4x4 adjustable track bar One piece front shafts w/CV joint shafts WJ control arms 31" general grabber at's Kobalt low pro toolbox Full guage cluster Pioneer digital media center head unit Peak 7.5" backup camera Smartest dash cam Cargo light More to come in the build thread Status: proudly daily driven (sorry for the dirt and mess in pics.) My build: https://r.tapatalk.com/shareLink?url=https://comancheclub.com/topic/8033-finally-found-onenow-it-has-a-new-floor/&share_tid=8033&share_fid=53169&share_type=t

I don't know anything about it. Just ran acrossed it on Craigslist while browsing My build: https://r.tapatalk.com/shareLink?url=https://comancheclub.com/topic/8033-finally-found-onenow-it-has-a-new-floor/&share_tid=8033&share_fid=53169&share_type=t

Not mine but local to me. Looks clean. https://fortwayne.craigslist.org/cto/d/roanoke-1986-jeep-comanche-xlt-4x4/7034216007.html My build: https://r.tapatalk.com/shareLink?url=https://comancheclub.com/topic/8033-finally-found-onenow-it-has-a-new-floor/&share_tid=8033&share_fid=53169&share_type=t

New stereo installed (my mj has blue tooth) and had been enjoying it with issues. Anytime I could get the sound to work, accomplished by repeatedly opening and closing my door, the dome lights would light. I solved this issue traced to a mix up of wires when I replaced the connector behind the drivers kick panel. After a couple hours of head scratching and wire probing I finally found it. Now my dome lights are all fuctioning correctly also. My build: https://r.tapatalk.com/shareLink?url=https://comancheclub.com/topic/8033-finally-found-onenow-it-has-a-new-floor/&share_tid=8033&share_fid=53169&share_type=t

How difficult would it be to make something tho take the place of the factory tow hook brackets? Not sure I have ever seen a set in person. My build: https://r.tapatalk.com/shareLink?url=https://comancheclub.com/topic/8033-finally-found-onenow-it-has-a-new-floor/&share_tid=8033&share_fid=53169&share_type=t

If we can find a willing fabricator I would definitely be interested in one of these. My build: https://r.tapatalk.com/shareLink?url=https://comancheclub.com/topic/8033-finally-found-onenow-it-has-a-new-floor/&share_tid=8033&share_fid=53169&share_type=t

As usual I forgot any pics.... New shocks all the way around, sway bar links, steering stabilizer, drilled out and replaced broken ujoint strap bolt in the front driveshaft. Installed some new to me window seals on the vent window frames. Doesnt sound like much but took me most of the day yesterday. Still have some gaskets and seals to change but they get to wait till the next oil change. Every little bit makes it ride and drive a little better. Its all starting to add up. I think it now is better on the road than my dads 08 chebby Colorado. Lol. LONG LIVE THE 'MANCHE!!!! My build: https://r.tapatalk.com/shareLink?url=https://comancheclub.com/topic/8033-finally-found-onenow-it-has-a-new-floor/&share_tid=8033&share_fid=53169&share_type=t

Its my trucks longbed brother. don't be afraid to daily drive it. They might be older trucks but can still be very reliable. My build: https://r.tapatalk.com/shareLink?url=https://comancheclub.com/topic/8033-finally-found-onenow-it-has-a-new-floor/&share_tid=8033&share_fid=53169&share_type=t

It is a 20 channel CB radio. I used to have one. Tele-talk was the brand if I remember correctly My build: https://r.tapatalk.com/shareLink?url=https://comancheclub.com/topic/8033-finally-found-onenow-it-has-a-new-floor/&share_tid=8033&share_fid=53169&share_type=t

I have a disconnect front. What other steps need to be taken? Sorry for all the questions. Just trying to figure the simplest way to get my truck back on the road. My build: https://r.tapatalk.com/shareLink?url=https://comancheclub.com/topic/8033-finally-found-onenow-it-has-a-new-floor/&share_tid=8033&share_fid=53169&share_type=t

Crap. I didnt even think of CV shaft. It shouldnt hurt anything to run one CV and the other u joint shaft should it? What model do I need to source from? My build: https://r.tapatalk.com/shareLink?url=https://comancheclub.com/topic/8033-finally-found-onenow-it-has-a-new-floor/&share_tid=8033&share_fid=53169&share_type=t

Ugh. Recived wrong shaft yesterday (my fault for not xhecking u joint size). Also got my new hub bearing, valve cover gasket, sway bar links, and AC oring set. Still waiting on the reciever drier. Gonna see if I can source a used stub shaft locally and hopefully get her back on the road this weekend. My build: https://r.tapatalk.com/shareLink?url=https://comancheclub.com/topic/8033-finally-found-onenow-it-has-a-new-floor/&share_tid=8033&share_fid=53169&share_type=t

Well thats out. Those listed above are both for the larger joint. My axles are the smaller joint. So I am back to the drawing board. My build: https://r.tapatalk.com/shareLink?url=https://comancheclub.com/topic/8033-finally-found-onenow-it-has-a-new-floor/&share_tid=8033&share_fid=53169&share_type=t

Back on topic. Friday at lunch I lost a drivers front wheel. Always recheck you aluminum wheel lug nuts. It ate a wheel (already have an extra) and a hub bearing. Decided to change the axle ujoint while I was right there. Then I found this. So now I am waiting on a new shaft and bearing to arrive along with a valve cover gasket and some ac parts. The new ujoint is pressed into the inner shaft ready for the new outer to arrive. I got the tire swapped off the damaged rim and onto the spare and rotated the tires. Next I think I'm gonna start on some suspension work. My build: https://r.tapatalk.com/shareLink?url=https://comancheclub.com/topic/8033-finally-found-onenow-it-has-a-new-floor/&share_tid=8033&share_fid=53169&share_type=t

Sweet. That beats the prices I was finding. I think I found a local buddy that has one. Hoping to hook up with him today. Realy trying to get it back on the road by tomorrow if I can. My build: https://r.tapatalk.com/shareLink?url=https://comancheclub.com/topic/8033-finally-found-onenow-it-has-a-new-floor/&share_tid=8033&share_fid=53169&share_type=t

It's an 89 Front Axle I'm just looking for the shaft I found one of the parts store but they want $110 for it. Was kinda hoping someone would have one for sale My build: https://r.tapatalk.com/shareLink?url=https://comancheclub.com/topic/8033-finally-found-onenow-it-has-a-new-floor/&share_tid=8033&share_fid=53169&share_type=t

So in the process of replacing my driver front wheel bearing. Noticed the u joint was bad. Run to parts store get bearing and I joint. Come home to install parts and notice this. Its the outter stub shaft. Any suggestins on best place to source one quickly? My build: https://r.tapatalk.com/shareLink?url=https://comancheclub.com/topic/8033-finally-found-onenow-it-has-a-new-floor/&share_tid=8033&share_fid=53169&share_type=t

I drove it to work. May not sound like much but was amazing for me. My build: https://r.tapatalk.com/shareLink?url=https://comancheclub.com/topic/8033-finally-found-onenow-it-has-a-new-floor/&share_tid=8033&share_fid=53169&share_type=t

Best shot I have right now. Man I need seat covers.... My build: https://r.tapatalk.com/shareLink?url=https://comancheclub.com/topic/8033-finally-found-onenow-it-has-a-new-floor/&share_tid=8033&share_fid=53169&share_type=t