watchamakalit

Pete I know I'm a ways away from you yet but I jave 2 extra turbines. If you need one still. One has a ding in the outside bead lip, but holds air fine. I would part with it if you need it. Edit: pic added. My build: https://r.tapatalk.com/shareLink?url=https://comancheclub.com/topic/8033-finally-found-onenow-it-has-a-new-floor/&share_tid=8033&share_fid=53169&share_type=t

I would be interested in them just the way they are. Do you have a price shipped to 46750? My build: https://r.tapatalk.com/shareLink?url=https://comancheclub.com/topic/8033-finally-found-onenow-it-has-a-new-floor/&share_tid=8033&share_fid=53169&share_type=t

Started cleaning windshield frame for the up coming new windshield and started on the interior reinstall. Getting excited. Really close to back on the road...... My build: https://r.tapatalk.com/shareLink?url=https://comancheclub.com/topic/8033-finally-found-onenow-it-has-a-new-floor/&share_tid=8033&share_fid=53169&share_type=t

I plan to stitch weld them in. Sent from my KFFOWI using Tapatalk

Another question. How big of a hole will seam sealer seal? I'm guessing I should probably just bite the bullet and change the entire pan. Just looking for input. My build: https://r.tapatalk.com/shareLink?url=https://comancheclub.com/topic/8033-finally-found-onenow-it-has-a-new-floor/&share_tid=8033&share_fid=53169&share_type=t

Any recommendations on what to paint the inner frame rail with? I don't want to have to do this again. Lol. I'm planning to seam seal and por15 the underside and then bedliner the interior floor. Just not sure what to do inside the rails. My build: https://r.tapatalk.com/shareLink?url=https://comancheclub.com/topic/8033-finally-found-onenow-it-has-a-new-floor/&share_tid=8033&share_fid=53169&share_type=t

Awesome. That helps. I didnt cut mine out. The rust faries turned it into pixy dust. I'm kinda flying blind. Gonna try to replicate the bracing on top of the floor to the best of my abilities. My build: https://r.tapatalk.com/shareLink?url=https://comancheclub.com/topic/8033-finally-found-onenow-it-has-a-new-floor/&share_tid=8033&share_fid=53169&share_type=t

I am working on replacing floor pans in my mj. I currently have the old cut out mostly but have run into a question. I cannot tell due to the amount of decay in my truck. Do these 2 "bolts" need to be drilled through the new floor pan or should it set on top of them? Not final fit of the pan by any means of the imagination. Just trying to figure out how it fits in there. I know there are some differences in the mj floor and the xj pan. Is this where it starts? My build: https://r.tapatalk.com/shareLink?url=https://comancheclub.com/topic/8033-finally-found-onenow-it-has-a-new-floor/&share_tid=8033&share_fid=53169&share_type=t

I think that's a great idea. My build: https://comancheclub.com/topic/8033-finally-found-onenow-it-has-a-new-floor/&share_tid=8033&share_fid=53169&share_type=t

Good to hear. I was a little worried but I think I will have plenty of extra metal from the passenger pan to fill it all. Any suggestions on best way to fix the underside and prevent it rusting again? My build: https://r.tapatalk.com/shareLink?url=https://comancheclub.com/topic/8033-finally-found-onenow-it-has-a-new-floor/&share_tid=8033&share_fid=53169&share_type=t

Put me down as a subscriber. It would be a wonderful addition. My build: https://r.tapatalk.com/shareLink?url=https://comancheclub.com/topic/8033-finally-found-onenow-it-has-a-new-floor/&share_tid=8033&share_fid=53169&share_type=t

Floor pans arrived today. Hoping to start on them tomorrow after work. My build: https://r.tapatalk.com/shareLink?url=https://comancheclub.com/topic/8033-finally-found-onenow-it-has-a-new-floor/&share_tid=8033&share_fid=53169&share_type=t

Didnt really do much after the 6hr drive home but the new floor pans arrived today. Gonna get started tomorrow after work. My build: https://r.tapatalk.com/shareLink?url=https://comancheclub.com/topic/8033-finally-found-onenow-it-has-a-new-floor/&share_tid=8033&share_fid=53169&share_type=t

Floor pans are due in on Monday. I'm hoping to get a start on it Tuesday evening. Its getting closer to done all the time. Once the floors are done all that remains on the immediate repair list is the new windshield. I'm getting anxious to get her back on the road. Sent from my LG-H871 using Tapatalk

X2 I recently purchased and installed the same bar on my 88. I too was impressed with the mass of the bar and bracket. Install was as straightforward as one would expect. Sent from my LG-H871 using Tapatalk

Windshield would be my guess. Sent from my LG-H871 using Tapatalk

Time I have. Money comes in spurts. Lol Sent from my LG-H871 using Tapatalk

Update. I just fixed a no start condition ive been chasing for a few weeks. Now I am down to floors and a new windshield before of the return to daily status. I patched the floors once before but knew then it was only temporary. Now is time to fix them right. The cosmetics can come later. Here are some updated pics. So what do you think. Are the floors saveable? Sent from my LG-H871 using Tapatalk

Thanks to the wonderful members here at comanche club I found the cause of a no start condition that ive fought for a while now. Now to put some things back together and get a new floor in it. Obligatory photo: don't worry she is getting moved out shortly..... Sent from my LG-H871 using Tapatalk

I FREAKING LOVE THIS FORUM!!!!!!!!!!! Wires stripped, corrosion removed, soldered, heatshrinked, and truck running. You guys are awesome. Sent from my KFFOWI using Tapatalk

Sure is. I'm waiting on the soldering gun to warm up now Sent from my KFFOWI using Tapatalk

Hold the phone i think I might have located an issue. I started tracing the wire from the diagnostic connector and found this buried in the harness..... Sent from my KFFOWI using Tapatalk

I just probed all the fusible links and they all test good Sent from my KFFOWI using Tapatalk

Can you be more specific as to the location of the fusible link? Sent from my KFFOWI using Tapatalk

D1-5 no voltage ever D2-4 got in run and start D1-6 no power Sent from my KFFOWI using Tapatalk