Chico

Ok eagle and TAz, thank you very much for the explanations and help. Taz, can ya get me a 33 tooth one and PM with total price w/ shipping? I'll send ya the money 2morrow. Thanks again :cheers:

Taz, I don't care too much about the MPH. I'm just trying to get it right so I can figure how many miles I'm getting to the gallon. If we went with the 33 tooth, do you have any idea how far my calculations would be off for MPG?

If I'm running 31 x 10.5 x 15. Where's a good place to get one. Oh it's 3.55 gears. AW4

It's possible. I didn't measure the amount I put in when I flushed the system. But should that cap do that? I have no idea what the proper amount was. There is no marker on the bottle. Guess I can just drain it, research the correct amount and refill it.

I bought a "reservoir bottle" for my closed system maybe 5 months back because my original one was cracked on the bottom and leaking. This came from the dealer. I notice when I drive the truck on a warm day a small amount of coolant comes out from underneath the cap. I thought it might not be on tight enough so I tightened it and instead of stopping it "pops" and starts at the beginning again. My question is: Is this normal, or are the plastic tank threads or cap faulty?

Actually skip, I think it's "how well you handle it." Yes, I'm a spaceball dork :cheers:

That's cool Rog. Where'd you get it. I think we should add it to the emoticons page.

This is going in circles. 1)First, get a whole cluster from an MJ or XJ. Get it from an 87,88,or 89 to be safe. Get the one with a TACH and all four gauges. 2)Make sure the connector on the speedometer is the same as yours. (white plastic or aluminum) 3) to be safe get one from a 2.5 liter. 4) Go to your favorite parts place and buy a temp sensor and oil pressure sensor. 5) Go ahead and buy a speedometer cable and grease. Put it in cuz now is the perfect time since you got everything apart. 6) Take an hour of your day and get it done. You'll be much happier :D 7) If you have any questions on the install please feel free to ask. We will only ridicule you if we're extremely bored or outta beer. Good luck :D

yeah, that is whats going to kill me. my truck is towed by a diesel, and thats over $4.00 a gallon :headpop: Suck it up kids. I'm riding my bike the 3.5 miles to work everyday to save the gas money for the trip.

I like it. You dorks are just jealous that you don't have pink inserts in your seats and doors. Wait, I mean purple. No, pink. Maybe it's lavender. Phac. What color is that? Truck still looks clean though and not everybody needs 35's on 15" steelies :cheers:

Not TPS. Probably IAC. Edit: Your throttle cable could be sticking somewhere.

Hey congrats :cheers:

It's either that or you have a large vaccum leak.

It's a rare American clasic soon to be considered museum pieces. :D Anyway, we just had this discussion a little while back here in pub. I think ya might have missed it. Everybody posted how much they would sell their truck for. I think the highest price was one million dollars. Wait, no that was me :D

"Have you ever danced with the devil by the pale moonlight?"

Well, it definately matters what color it is. :D just kidding. What's your "obvious" and what engine is it?

Thanks guys. I wonder why the first one broke when I did that :hmm:

Noob I am. I already broke one. :wall: How da ya take em off?

I think that was someone elses wife. :dunno:

Do you know if the fuel pump has been changed recently?

Not always true. I have a big @$$ dog that will just lick home intruders to death. Golden Retriever :D

Where do you buy those? Question #2 are those plugs in the floorboards located at the lowest point in the cabin so water can escape through them?

I agree w/ Eagle. And always hold your gun chest level at the door as you stand at a 45 degree in case said intruder comes through the door without you opening it.

To be honest, I have to read the entire post. I have no idea what's wrong. I just saw that you need diagrams. That's the clearest I can give ya. You're gonna have to print them out and use a magnifing glass. Let me read the whole post and I'll let you know.