fiatslug87

It got hit so hard its grill turned upside down.

If you look between the cab and bed you can see where the drain holes are, one in the center and two a couple of inches from each bed side.

MTS makes replacement senders. http://www.mtscompany.com edit: that one is an MTS unit

On eBay in Elkhorn, WI asking $15,998 OBO.

On eBay in Haslett, MI.

On eBay in Cleveland, OH.

Added a custom MOLLE panel.

Stock MJ shackle:

Purple is the EGR valve, orange is the EGR transducer.

You just transposed the numbers from the window sticker.

04713639 But agree with cruiser54 about checking other things first.

You can buy a RenixEngineMonitor https://nickintimedesign.com Check resistance between A & B on the O2 sensor, should be 5-7 ohms. For me aftermarket O2 sensors have not worked properly, try to find a Mopar one. cruiser54 is a member on here that put together a bunch of tips/procedures to diagnose/fix problems with our Jeeps. http://cruiser54.com/

It was a fun day with great people, great food and great Jeeps! Thanks for hosting.

The husky liners come in black (51071), gray (51072) and tan (51073). Gray and tan are discontinued but can still be found at some retailers. Here they are in black in an MJ.

@cruiser54 grab it! You’re in Prescott aren’t you?

Also cargolicious

Yeah, it’s a cut down full length XJ console patched in the back and fiberglass reinforced. Then sanded to fit the contour of our headliner.

I don’t recall exactly but it was RENIX era.

Thanks. It’s painted SEM burgundy over a Krylon sand finish plastic paint for some texture, the panels and buttons are silver to match the Laredo dash surround and floor console. I wanted to keep the long visors so I added an aluminum 2x1/8” strip from front to back and used part of the XJ front bracket. For the rear, I added a rivetnut with the long end pointing down. Clearance when visors are folded up:

Not today but recently recovered and installed my headliner, also added an overhead console with lights, temp and compass. Thanks to @Gjeep for the custom wiring harness and working temp/compass module.

Westin/Fey

IMG_0773.MOV

MJ slider latch, use rearview mirror adhesive.