fiatslug87

So which one is that? I can’t make out the label. I remember a long, long time ago I saw a single DIN with a retractable fold down display but can’t seem to find it again.

What year truck? Put some vehicle info in your signature.

On eBay in Fort Lauderdale, FL asking $28,500 OBO.

Here’s a a how-to for the swap, I’m sure there are a lot more on here. According to Rockauto the masters are the same but slaves are different.

On eBay in Statesville, NC asking $5575 OBO.

Did you steer him to this site so he can keep us updated?

This was from Don’s post. “I got mine out by using a hardened small finishing nail. Use a bench grinder to grind down the nail point on four sides like a tiny easy-out with a point. Tap it into the roll pin as far as possible, then twist and pull it out with pliars and the roll pin should come out with it. It may take a couple or three tries, but it comes out eventually.”

It’s MTS. https://www.mtscompany.com/sendingunits.htm

December 2024 update, see first post. 5 new additions this month for a total of 2345.

Spray some starting fluid in the intake hose and see if it fires up then dies. This would indicate a fuel problem.

That MUST change!

Look at the Registry List and filter the engine column for turbo. https://comancheclub.com/topic/62656-vin-registry-list-november-2024-update/

It appears that APC is the two tone paint code irrespective of color combination, so AJS could be the 4 wheeler of the year package.

Maybe the 4 wheeler of the year, wouldn’t the two different two tines have different codes?

@Muncher How about adding a couple pictures?

I think you’re at lease 3/4 of the way down that slippery slope.

Did the 97+ door handles ever come in chrome?

What!? When did this happen? Did I miss it or am I loosing it?

Completely Amaturish Drawing? YES

Looking forward to seeing your progress. Add its VIN to the registry when you get a chance.

Look through @Limeyjeeper’s build thread, I think it’s in there.

Hey. I remember your avatar.

You mean the rails that attach to the bed? Can’t they be notched to clear the bar? When/if you get a chance can you snap some pics of the rails installed? Thanks

Are there ribs in it? Do you think it could be modified to fit around the sport bar?

How does it fit, any detailed pictures? This one? Amazon Link