Ωhm

Don't understand 17.4 reading. Never done a HO vs RENIX TPS comparison before. Maybe someone on site has. Note the two pages I've included for you. TPS RENIX.pdf TPS HO.pdf

Looks like your running the HO TPS. Wiring might be different between the HO and RENIX.

Does that MAP hose have something "T" into it? Thats not normal. Follow vacuum hose from MAP to intake manifold just to make sure its right.

KEY ON/OFF, you never want fuel in this vacuum line. Fuel would indicate leaky FPR.

Check the Fuel Pressure Regulator (FPR) vacuum hose between the FPR and intake manifold for fuel in the hose.

Sound like this jeep ain't running at all. What are your symptoms? NO CRANK CRANK NO START START WON'T STAY RUNNING etc, etc.

Don't know here, just what the 88ElectManual calls it. This is different, but we don't know the reason for it. Correct? Does your 1990 Engine Control Harness have connectors C103, C104 & C109? Is that the reason for the Engine Harness request?

That is the correct symptom for this: Bad Thing.

Taken from 88FSM.

Make sure NO fuel is coming out of this vent hole used for the Fuel Pressure Regulator.

I'm not sure which way to go here, but this guy made me think about this.

I would think that the single connect is both the inlet and outlet, no check valve. With the double connect, one inlet and one outlet, that should have an internal check valve.

@cruiser54 Do you remember if that was that the CC side or the HVAC side of that vacuum reservoir you cut off? I'm wondering if both sides have the check valve.

We should learn from it, but instead we ban/burn the books.

Couple of more Eagles from the eighties.

You can always get more money, but a 2.5L injector NOS, now that's a different story.

"X" means cut the wire. Relay is as follows:

You'll need to fix/solve this first. I think when they bypass the Blower Switch, only the HI circuit is bypassed. Proof the following, should do the job. If you want M2 circuit relayed, do it the same way.

STL file JEEP COMANCHE 1984 (1/24) printable car body・3D printing template to download・Cults (cults3d.com)

If it a factory wire and if it could have been VIO/YEL at one time, it the Blower Motor Feed for the AC or Heater control unit.

2023 Memorial Day Parade. Best I could do is the belly side only.

That going to tidy up and look real nice when your finished.

Sorry I wasn't paying attention. I was thinking of the HEADLIGHT HARNESS UPGRADE and you were using that wire to power up the RELAYs. oops. Never mind.