Pete M

I cracked the housing on a 9" nothing is bulletproof.

glad to hear it was something, um, "simple" peugeot or ax?

how solid are the floors? bedliner will just cover the rust and allow it to propagate uncontrolled.

last I heard I-75 was still both ways in north FL but they have opened up the shoulders to traffic flow. highways near the coasts of FL and GA should be one-way by now. I've seen governors and mayors on tv announcing phone numbers for those who cannot move themselves out of the path to get free transport. for the remaining who can't manage to make that call or aren't watching the news or weather channel, I've seen footage from prior storms where the cops go down street by street with loudspeakers.

run away. far, far away.

I think you know the answer to that

the lights are highly overrated. in my liberty they aren't even accurate (which is a good thing since the awd position is a no-light position and I don't have to stare at that light all the time :) )

same experience here with the 242 in my KJ. I just leave it in awd until I need 4low. :D

did the previous owner complain of this from day one of the swap or is it a new problem?

how well does it go into first? could be the clutch isn't fully disengaging.

do you have the anti-PB browser add-on that lets you see the PB pics?

that's an awesome piece of 80s nostalgia right there :D

sooooo many needles to find :(

yeah, the pic they used looks like a grenaded flywheel and I doubt too many 4.0s could get that much rpm. :) here's a peugeot rebuild kit for anyone that needs it:

I have no idea how it should be, but it looks like I see one vacuum line plugged and another port open.

chances are that you just need the existing carb adjusted. just gotta find a local shop that specializes. carbs are really hard to diagnose over the internet. :(

this is probably not the right advice (I don't know carbs), but many moons ago with my old 86 I adjusted the idle screw to bump up the rpms. :) (it's a little set screw that the throttle arm rests against at idle)

I've had errors each time I've tried to manually approve a new member. guessing there's a coloration to the emails. :(