HOrnbrod

Correct. 93 and up all the same config, except for the rotor material (composite, cast, etc.)

To retain the load sensing prop valve you would need to fab a new mounting bracket or mod the existing for the 8.25 cover bolts and an adjustable rod to get the correct rear brake bias. When I junked the D35 and swapped in a D44 I had to change the mounting bracket. Thanks G. :thumbsup: But first I'd verify the valve is working by tie-wrapping the arm in various positions and testing it on a wet parking lot to see how it affects the rear brakes. If it does nothing, I'd eliminate it.

I can't think of a single reason why it wouldn't work. The steering gear and suspension parts are interchangeable and the axle mounting points are the same. For $50 I think it would be well worth doing.

Hope that return spring works for ya.

http://www.quadratec.com/category/Jeep+Steel+Wheels/136/ Could also be factory YJ wheels:

Bummer. There were still five left when I bought mine. I'll bet some guys from CC snagged them. :yes:

Are there any drawbacks (or advantages) as a left-handed shooter?

You mean the starter relay, si?

Good to hear.

Si.

All the stuff from Amazon Warehouse says it's used. What it means is the packaging might be ripped, it may have a scratch, overstock merchandise, etc. I've bought a lot of stuff there and it was all brand new. Even got a pair of Truck-lite LED headlights there that were perfect in every way; $60/ea.

What's mud?

^^^ :yes:

Sign in to yahoo.com if you have an account. Or don't if you don't. EDIT: google.com. But it doesn't matter since you don't have either..............

Sign in to yahoo.com if you have an account. Or don't if you don't.

Good deal for a MOOG Drag Link on Amazon Warehouse Deals HERE. Nice upgrade for a Renix @ $25.62. Usually at least 2X this price.

It's dirty - I've been slacking off a lot lately. Annual funk time..............

I haven't cleaned mine. Still waiting for it to malfunction...............

It makes sense if you want beefier TRE's.

Yours must be different than mine.My front axle came from a 93 GC. I just assumed they were the same or similar. My 91 2WD has those brackets, don't know about the 4WD. They went away in 93, different design hubs.

Exactly. You need #4 pad on the diagram. To remove it, unscrew antenna (2), then unscrew the nut (3) while holding the stud sticking up on the antenna cable (5) so the antenna cable doesn't fall into the fender well. Press on your new pad to reinstall, the bolt it back up. Cake.

Si. 87 and up are the same.

That's what it's like here too. :yes: You don't spend much time on Facebook groups. I blame the easy user interface for allowing people with single digit IQs to be able to curse the world by sharing their stupidity. Seriously. It's ridiculous what gets posted and actually replied to on there. I don't spend any time on Facebook groups.

That's what it's like here too. :yes:

Tank? Image Not Found