Jump to content

A-man930

Members
 View Profile  See their activity

  • Posts

    1506

  • Joined

  • Last visited

  • Days Won

    3

 Content Type 

Everything posted by A-man930

  1. A-man930
    This is soooo strange. Keep it up!
  2. A-man930
    The piece I had was just big enough to fit the bolt pattern (16" dia) but not enough to give the bell much of anything to actually be drawn up against. Your pictures showed the outside of the bellhousing is 17.5" to 18" in diameter. So close!
  3. A-man930
    Makes sense; thanks for the insight.
  4. A-man930
    Some quick research on that Audi 2.0 (known as the EA831) indicates that it does not share the bolt pattern of the EA827 (which I think is what even the current TDi engines are based upon).
  5. A-man930
    Boy that sounds like an impossibly hard to find combination of parts even if it does happen to share a pattern... plus I would need there to be manual trans. parts. I have heard the same with the 72+ AMC engines several times now.
  6. A-man930
    Although I have not personally verified, this is the TDi side of things:
  7. A-man930
    Multiple sources have stated that the 4.0 bellhousing bolt pattern is identical to all AMC V8s; if that is indeed true I used these images to do a quick n dirty check: This is the piece I scored and the quick tape measure markings I made from the two above drawings: (I did not make the existing holes) If you can't tell from the picture, the bolts themselves will be very near the edge of this plate... my gut says its just barely too small, but I just HAVE to know for sure!
  8. A-man930
    Pm on the way
  9. A-man930
    The adapter I'm wanting to make? No not really I suppose, It'll be making the rear of the TDi mimic the rear of a 4.0. I just had a 16" diameter piece of 6061 land in my lap yesterday and I want to know if it's big enough for the actual outside dimensions of the bell.
  10. A-man930
    Interested if anyone has a spare or leftover internal slave AX-15 bellhousing lying around they'd like to part ways with, loan out, or donate. Looking into making my own engine adapter and want to avoid removing my trans just for dimensions... worth a shot!
  11. A-man930
    What a tease!!!!
  12. A-man930
    Very nice.
  13. A-man930
    I dig it! One of my coworkers is into old Limey stuff; very strange how they did some stuff.
  14. A-man930
    some people never grow up... myself included.
  15. A-man930
    love me some diesel swap action. keep up the thread
  16. A-man930
    Been here, done that. Good choice with the Eastwood stuff
  17. A-man930
    Interested to see how that plastic ball joint thingey goes back together. I was in mine a few years back to replace one of the bearings and it didn't go well Keep the pics coming!
  18. A-man930
    I'd like one like this.
  19. A-man930
    deleted
  20. A-man930
    rust preventative! Thanks for the heads-up on the wire rub issue.
  21. A-man930

    Starman:

    A-man930 replied to Sir Sam's topic in The Pub

    Amazing. I NEED to see this in person one day.
  22. A-man930
    Hard to listen to though... sorry, had to say it. edit: I thoroughly enjoy Curious Droid
  23. A-man930
    +1 this guy is great.
  24. A-man930

    Starman:

    A-man930 replied to Sir Sam's topic in The Pub

    for those not in the know:
  25. A-man930

    Starman:

    A-man930 replied to Sir Sam's topic in The Pub

    I just hopped on here to see if anyone on CC was following this. Absolutely incredible! What a magnificent PR stunt!
×
×
  • Create New...