Carlos30 Posted February 12 Share Posted February 12 Hi i have seen many opinions of which brand and size were the original fog lights of jeep comanche and i have seen that they have very diferent information, some say they were diferent brand used in the bottom front defense than the one used in the roll bar. Some one say the brand of the lights on the roll bar were " ROL" other says "KC" and some others "marchall" They were trucks from factory with both fog lights? In bottom front and roll bar? Which were the original switches? I have seen the swithes only have two dashes one for turning cargo and one for fog light so if they have the two fog lamps options how they turn it on? With the same dash? Please excuse my lack of knowledge, I hope my question was clear. Thank you. Link to comment Share on other sites More sharing options...
Eagle_SX4 Posted February 12 Share Posted February 12 The switch was on the right side of the steering column. Link to comment Share on other sites More sharing options...
fiatslug87 Posted February 12 Share Posted February 12 Brand depends on the year. In general the AMC years were Marchals for rectangular ones and I think KC for round. Chrysler years had several including ROL which is not listed in their ‘92 catalog. Pics of the ‘88 and ‘92 catalogs, respectively. Link to comment Share on other sites More sharing options...
pizzaman09 Posted February 13 Share Posted February 13 I had no idea that they offered roll bar lights, that's awesome. Link to comment Share on other sites More sharing options...
fiatslug87 Posted February 13 Share Posted February 13 @pizzaman09 they even offered an adapter for four lights on the sport bar. Link to comment Share on other sites More sharing options...
Gojira94 Posted February 13 Share Posted February 13 Not to nose this thread into the weeds, but wasn’t there someone at some point on or associated with this forum that was making switch panel overlays? Be nice to be able to put together panels that have the OE appearance. Link to comment Share on other sites More sharing options...
eaglescout526 Posted February 13 Share Posted February 13 42 minutes ago, Gojira94 said: Not to nose this thread into the weeds, but wasn’t there someone at some point on or associated with this forum that was making switch panel overlays? Be nice to be able to put together panels that have the OE appearance. @ghetdjc320 is the one who was making them. Link to comment Share on other sites More sharing options...
Carlos30 Posted February 16 Author Share Posted February 16 On 2/12/2026 at 9:15 PM, fiatslug87 said: @pizzaman09 they even offered an adapter for four lights on the sport bar. Good info, my roll bar is original factory... and it has 3 adapters.... i always think they only have 2 adapters... but it clearly says "capacity from 2 to 4" so it could be 3 jaja thanks Link to comment Share on other sites More sharing options...
fiatslug87 Posted February 16 Share Posted February 16 The center one does not look like it’s the same as the other two, could it just be added on? I’ve never seen a factory bar with three tabs in any literature. Link to comment Share on other sites More sharing options...
Carlos30 Posted February 17 Author Share Posted February 17 On 2/12/2026 at 2:03 PM, fiatslug87 said: Brand depends on the year. In general the AMC years were Marchals for rectangular ones and I think KC for round. Chrysler years had several including ROL which is not listed in their ‘92 catalog. Pics of the ‘88 and ‘92 catalogs, respectively. Excellent information and thank you for sharing this books! I havent seen round lights in roll bar! But it clearly says they exist! Link to comment Share on other sites More sharing options...
JimiGibbs Posted February 17 Share Posted February 17 Not OEM but I went with Hella driving lights.... Gives it a little "old school" look. Link to comment Share on other sites More sharing options...
hgeranium Posted February 17 Share Posted February 17 1 hour ago, JimiGibbs said: Not OEM but I went with Hella driving lights.... Gives it a little "old school" look. How much did you pay for those? Link to comment Share on other sites More sharing options...
JimiGibbs Posted February 17 Share Posted February 17 2 hours ago, hgeranium said: How much did you pay for those? $65 http://www.amazon.com/HELLA-005860691-Lamp-Kit-Multi/dp/B0049DDQF0/ref=sr_1_1?crid=2XSAPWQ6YHCK9&dib=eyJ2IjoiMSJ9.26Z7vTd_RpOTBqSSH1yIbEBcFlqUt6jhSVT5XRdunv5jgPoEbQ8B5MZY7UUDNGy2SU9v1uD5AUO34oX-xbMyMLzGClQc04mCf5NDykawKyBMe2p0t2EJBoRJRV7O8i7yFOZCDe7rPGPfww0AfLnpGOnbBDZJJ9Ppu_vB_6TYUzYgNrQ35dKilHW7i0zKKrbo_xM0Rfk7TaHRTGU4XKc8tQ9QU_x4fNsswLVgEatjW7z_Zy3XCgv2Z0oazlkJFxAdUfnjLvH_JU1vy8lB3Vg4ZNS-d87ETYKfEnSkFGt2FhY.SuVcrNJ-ZJCc3wtqtpSZN8RgKSbQ1OffKh3UPDdiw9U&dib_tag=se&keywords=Hella+005860691+450+Driving+Light+KIt+H3+12V+ECE%2FSAE&nsdOptOutParam=true&qid=1771361455&s=automotive&sprefix=hella+005860691+450+driving+light+kit+h3+12v+ece%2Fsae+%2Cautomotive%2C197&sr=1-1 Link to comment Share on other sites More sharing options...
llhat Posted February 18 Share Posted February 18 that ain't bad on hella... I used a Cibe set that were an over the counter GM application... had friend that was parts manager.. though no longer working, they are still mounted... need bulb assembly for them.... think bulb holder too... Link to comment Share on other sites More sharing options...
ghetdjc320 Posted February 18 Share Posted February 18 On 2/13/2026 at 12:14 AM, eaglescout526 said: @ghetdjc320 is the one who was making them. I think I still have old stock of those switch covers in a box somewhere. I must have made 20 different layout varieties. The actual "fog" lights switch went on the left of the column and would have been next to the factory cargo light switch if that was installed on the truck. The roll bar light switch went to the right of the column as noted in the other post and would have been next to the "power/comfort" switch if so optioned. Although I never saw this in any original MJ, I suppose the highest possible option combo would have been factory fogs, cargo lamp, sports bar light and power/comfort for dash switches. Then again, I've never seen factory electric windows or locks in an MJ either. Link to comment Share on other sites More sharing options...
Gojira94 Posted February 19 Share Posted February 19 On 2/17/2026 at 11:06 PM, ghetdjc320 said: I think I still have old stock of those switch covers in a box somewhere. I must have made 20 different layout varieties. The actual "fog" lights switch went on the left of the column and would have been next to the factory cargo light switch if that was installed on the truck. I’d almost kill for one of the left side fog/cargo covers. If you run across that box some time… Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now