Oracle LED tail lamp harness

[oleskool]

2 hours ago, eaglescout526 said:

Thanks. I haven’t had a chance to make a prototype harness yet. One of my room mates just moved out over the weekend and thus was helping him pack and prep. I will try to get one in the works shortly. 

Sign me up, I will need one.  I refuse to cut the harness to put in aftermarket lights 

[eaglescout526]

I’m glad there is a good amount of interest. I will promptly start working on the proto as soon as I can. 

[cruiser54]

Has anyone received and installed these lamps yet? 

[Limeyjeeper]

4 hours ago, cruiser54 said:

Has anyone received and installed these lamps yet? 

They aren't shipping yet. Website says early June 2023 

[The86manche]

Here we go!

[eaglescout526]

Fantastic. If I recall they should be just standard bullet connectors that was used for a long while. 

[VorTekX]

With the recent release of the LED's, I was just curious if you have/ are still planning to make a prototype?

[eaglescout526]

48 minutes ago, yungupgrade said:

With the recent release of the LED's, I was just curious if you have/ are still planning to make a prototype?

Given my busy life and the fact they changed the connector from weatherpack to a newer style from Delphi, I have decided that this is something I won’t be able to pursue. I apologize to everyone. If I find a spare moment and if I get a pic of the current plug, I can do some digging and look into doing this. 

[VorTekX]

How were you planning to make it? Maybe if I have some time I could gather materials and try it out. Just buy the same gauged wire and solder the respective reproduction connectors to the ends, right?

[eaglescout526]

22 minutes ago, yungupgrade said:

How were you planning to make it? Maybe if I have some time I could gather materials and try it out. Just buy the same gauged wire and solder the respective reproduction connectors to the ends, right?

I have the connectors for the tail lamp harness at the body and I have plenty of wire I can use to make the harnesses, but getting those new style connectors wouldbe been a challenge for me to try to find without a dozen trial and error. So if you want to take this on, I can send what I have if you are interested. A lot of the wire i have came from my work that are scrap harnesses.

[VorTekX]

Did some quick google searching and zooming in on their website pics and it seems to be that this is the connecter they're using:

 

https://www.google.com/search?authuser=1&sxsrf=AB5stBhf26PV7wu5qftP09Ybuj9FB-1Wcg:1689814106735&q=AMP+electrical+connectors&tsm=3&tbm=isch&sa=X&ved=2ahUKEwj9uMWMiJyAAxXRFmIAHV07DIsQ0pQJegQICBAB&biw=1920&bih=941&dpr=1#imgrc=yM_bXuoXpcRdQM

 

I have a set of the oracle lights at my house but I will not be home till Friday night. Will verify if these are the matching connectors then. If they are, I'll PM you about shipping the material. 

[eaglescout526]

1 hour ago, yungupgrade said:

I have a set of the oracle lights at my house but I will not be home till Friday night. Will verify if these are the matching connectors then. If they are, I'll PM you about shipping the material. 

Sounds good. Shoot me a PM. I can say they are in the Delphi family. I’ll do some digging too to help expedite the process. 

[oleskool]

This should be them. 

[eaglescout526]

Looks like sealed metri. 

[oleskool]

28 minutes ago, eaglescout526 said:

Looks like sealed metri. 

TE AMP family. I can pull the mating part number tomorrow. Ampseal connectors are nice. They are used in tons of automotive applications. 

[fiatslug87]

Just ask the guys at Oracle to verify.

[coheed]

11 hours ago, fiatslug87 said:

Just ask the guys at Oracle to verify.

From my experience, good luck getting them to reply to anything. 

[Tex06]

1 hour ago, coheed said:

From my experience, good luck getting them to reply to anything. 

Send me what info ya need in a PM. I live close by and am picking my set up in person instead of paying for shipping. I don't mind asking while I'm there. 

[coheed]

1 hour ago, Tex06 said:

Send me what info ya need in a PM. I live close by and am picking my set up in person instead of paying for shipping. I don't mind asking while I'm there. 

I don't need anything from them now, there was an issue and I got an automated email about my pre-order. When I emailed them about it I got no response, even after 3 separate emails.

 

More of just an anecdote of how they didn't attempt to communicate with a customer who had just spent a few hundred dollars with them. 

[VorTekX]

2 hours ago, Tex06 said:

Send me what info ya need in a PM. I live close by and am picking my set up in person instead of paying for shipping. I don't mind asking while I'm there. 

Just ask them what brand/ part number they sourced the electrical connectors for their MJ taillights (part #5909)