SW86 Posted February 7, 2011 Share Posted February 7, 2011 where can i buy a set to replace my current dome lights? I'm not looking to change out the style or add LED, i just want a straight replacement that doesnt involve me going to the JY. secondly, arent they just supposed to come on when you open the door? ive never had them working until now but they only want to come on when they're pushed facing down or up. Link to comment Share on other sites More sharing options...
jons87mj Posted February 7, 2011 Share Posted February 7, 2011 sounds like they are working fine. they are not supposedto come on when they are in the center position Link to comment Share on other sites More sharing options...
MJCARENA Posted February 7, 2011 Share Posted February 7, 2011 Here is a replacement light. http://cgi.ebay.com/ebaymotors/Jeep-Com ... ccessories Link to comment Share on other sites More sharing options...
Automan2164 Posted February 7, 2011 Share Posted February 7, 2011 Here is a replacement light. http://cgi.ebay.com/ebaymotors/Jeep-Com ... ccessories Contact the seller first. They give a discount for Comanche Club members. Rob L. Link to comment Share on other sites More sharing options...
LambertLambert Posted February 7, 2011 Share Posted February 7, 2011 Oh, I wish I'd known about the discount, although at $16 it couldn't have been much! I installed a pair of these in my Comanche and I really like them. They are black plastic, but seem to be quality made. Link to comment Share on other sites More sharing options...
SW86 Posted February 8, 2011 Author Share Posted February 8, 2011 sweet! I'm glad they're working as supposed to. thanks for the link and info about those replacement ones :cheers: i might have to give those a try, since both of mine have broken clips and just hang there half the time. Link to comment Share on other sites More sharing options...
MJRemi Posted February 8, 2011 Share Posted February 8, 2011 sounds like they are working fine.they are not supposedto come on when they are in the center position They are supposed to come on in center position when you open either door. The replacements work exactly the same as OE. Link to comment Share on other sites More sharing options...
Oizarod115 Posted February 8, 2011 Share Posted February 8, 2011 sounds like they are working fine.they are not supposedto come on when they are in the center position They are supposed to come on in center position when you open either door. The replacements work exactly the same as OE. :dunno: thats not how mine work? up is on, down is on with doors/switch, center is off. :dunno: Link to comment Share on other sites More sharing options...
Automan2164 Posted February 8, 2011 Share Posted February 8, 2011 sounds like they are working fine.they are not supposedto come on when they are in the center position They are supposed to come on in center position when you open either door. The replacements work exactly the same as OE. :dunno: thats not how mine work? up is on, down is on with doors/switch, center is off. :dunno: Same here. Rob L. Link to comment Share on other sites More sharing options...
btm24 Posted February 8, 2011 Share Posted February 8, 2011 This is how they are supposed to work: Brandon Link to comment Share on other sites More sharing options...
peteco Posted February 8, 2011 Share Posted February 8, 2011 has anyone posted a picture of where to find the Illuminated entry system relay? my chiltons says it is a relay TAN on a bracket {3 relays} behind the instrument panel? all my lights work, but the door activated light doesnt, in any position (up middle down). tried searching the forum and could'nt find much. Link to comment Share on other sites More sharing options...
MJCARENA Posted February 9, 2011 Share Posted February 9, 2011 I don't think there is a relay for that. 1. Make sure you have 12 volts at the lights (pink wire). 2. Did you check your bulbs to make sure they are good. 3. Clean the roller contacts on the dome lights. Link to comment Share on other sites More sharing options...
fiatslug87 Posted February 10, 2011 Share Posted February 10, 2011 Oh, I wish I'd known about the discount, although at $16 it couldn't have been much! I installed a pair of these in my Comanche and I really like them. They are black plastic, but seem to be quality made. 50% off, pretty significant. Link to comment Share on other sites More sharing options...
skidoo_j Posted February 19, 2011 Share Posted February 19, 2011 Oh, I wish I'd known about the discount, although at $16 it couldn't have been much! I installed a pair of these in my Comanche and I really like them. They are black plastic, but seem to be quality made. 50% off, pretty significant. Just got two for price of one from them and recieved it in 3 days. Great looking product. They come with two pieces and require you to make the existing hole a little larger. you'll need three male spades and three female spades per side unless you want to cut existing wires. I think th eblack trim looks better then the chrome anyways. Link to comment Share on other sites More sharing options...
STERLING STINGER Posted February 19, 2011 Share Posted February 19, 2011 sounds like they are working fine.they are not supposedto come on when they are in the center position They are supposed to come on in center position when you open either door. The replacements work exactly the same as OE. :dunno: thats not how mine work? up is on, down is on with doors/switch, center is off. :dunno: Same here. Rob L. both of mine also Link to comment Share on other sites More sharing options...
skidoo_j Posted February 24, 2011 Share Posted February 24, 2011 the replacements from euramtec are on anytime up or down, and on when door open when centered. Link to comment Share on other sites More sharing options...
peteco Posted February 26, 2011 Share Posted February 26, 2011 that's now how mine work too. not sure why they started to work again, but i did hit all the door jams,keyholes,hardware with a huge amount of wd40 last week. now my keys twist like a hot knife in butter and my doors have no squeeks at all.then it rained hard last night and the courtesy lights stopped again, DOH! got my entry lights working full time now, the door jam plunger got a good oiling/cleaning, now they work great.. Link to comment Share on other sites More sharing options...
Cajun Posted March 1, 2011 Share Posted March 1, 2011 I REPLACED MY TWO DOME LIGHTS WITH TWO FROM A BRONCO II. THEY LOOK NICER AND HAVE A SWITCH THAT YOU CAN CONTROL LIKE THE FACTORYS. I USED THE LED's AND THEY ARE BRIGHTER AND DON'T DRAIN THE BATTERY WHEN WORKING ON THE TRUCK. YOU SHOULD CONSIDER IT....CAJUN Link to comment Share on other sites More sharing options...
jeepsouth Posted March 1, 2011 Share Posted March 1, 2011 Installed two euramtec replacement lights today. Easy,and look/work great. Got the discount from ebay seller (two for price of one) as others have done also. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now