comanche12 Posted October 12, 2010 Share Posted October 12, 2010 added 75w-90 in my pos ba 10/5 trans and enjoyngi the smell of gear oil...NOT :ack: Link to comment Share on other sites More sharing options...
ComancheKid45 Posted October 12, 2010 Share Posted October 12, 2010 Lately, Did an oil change, with a Fram oil filter/ Ugh Anything but Fram :ack: Otherwise your treating her very well ;) Link to comment Share on other sites More sharing options...
-SHANE- Posted October 13, 2010 Share Posted October 13, 2010 I installed a new $120 wheel hub baring on the passenger side :banana: Link to comment Share on other sites More sharing options...
ComancheKid45 Posted October 13, 2010 Share Posted October 13, 2010 Greased the Rear shaft u joints and trimmed off my U bolts even with the spring plate before i bashed em off something. Link to comment Share on other sites More sharing options...
-SHANE- Posted October 14, 2010 Share Posted October 14, 2010 HAD SUM FUN TODAY WITH MY NEW GRINDING WHEEL Link to comment Share on other sites More sharing options...
comanche12 Posted October 14, 2010 Share Posted October 14, 2010 ^^^ holy rusty! just reseal my front cover again but with ultra black rtv :) and got new bolts with hex head not allen head or whatever its called and jbweld the dented hole that cause water come in the differental housing scrapped old powdered coat and por15 my front coils half way. por15 my crossmember and heavy duty skid armor Link to comment Share on other sites More sharing options...
Oizarod115 Posted October 14, 2010 Share Posted October 14, 2010 made sure it hadn't been stolen and got the trojans out of the center console. Link to comment Share on other sites More sharing options...
Pete M Posted October 14, 2010 Share Posted October 14, 2010 pulled the 88 back into the garage after I discovered I missed a semi-important step... :rant: Link to comment Share on other sites More sharing options...
STERLING STINGER Posted October 14, 2010 Share Posted October 14, 2010 pulled the 88 back into the garage after I discovered I missed a semi-important step... :rant: well? Link to comment Share on other sites More sharing options...
-SHANE- Posted October 14, 2010 Share Posted October 14, 2010 ^^^ holy rusty! ill post the drivers side in a cpl days . talk about holy Link to comment Share on other sites More sharing options...
Pete M Posted October 14, 2010 Share Posted October 14, 2010 pulled the 88 back into the garage after I discovered I missed a semi-important step... :rant: well? short version: it's important to re-torque the U-bolts after weight is on the leafs. this is especially important if your perches aren't welded yet. that's what I get for being in a hurry. photos when I finally get a chance to finish the job. Link to comment Share on other sites More sharing options...
Jakeman17 Posted October 14, 2010 Share Posted October 14, 2010 Checked oil Link to comment Share on other sites More sharing options...
comanche12 Posted October 14, 2010 Share Posted October 14, 2010 ^^^ holy rusty! ill post the drivers side in a cpl days . talk about holy holy.... okay lets see :clapping: Link to comment Share on other sites More sharing options...
2360 Posted October 15, 2010 Share Posted October 15, 2010 Did some touch up painting, using brush and rust paint out of a can. Gotta get'er done before the cold weather arrives. Having some issues with tail lights. Sometimes the left brake light doesn't work sometimes it does. Sometimes the right tail light parking light doesn't work sometimes it does. After some poking around, looks like the switch in the steering column is going bye bye. Time for another pick n pull special. I don't like taking the steering wheel apart. Took some pic's of what looks like a crack in the bell housing. I'm hoping it's not cracked. Link to comment Share on other sites More sharing options...
Pete M Posted October 15, 2010 Share Posted October 15, 2010 call it the poor man's high pinion axle. :rotf: or the u-joint killa. :yes: Link to comment Share on other sites More sharing options...
comanche12 Posted October 15, 2010 Share Posted October 15, 2010 is it a 9" rear? look exactly same as mine expect that pinion angle haha :fool: Link to comment Share on other sites More sharing options...
Pete M Posted October 15, 2010 Share Posted October 15, 2010 a-yup. :thumbsup: Link to comment Share on other sites More sharing options...
comanche12 Posted October 15, 2010 Share Posted October 15, 2010 haha got it fixed? Link to comment Share on other sites More sharing options...
Pete M Posted October 15, 2010 Share Posted October 15, 2010 sorta. It's now rotated back to where I want it, but the truck is still up on the stands. Link to comment Share on other sites More sharing options...
comanche12 Posted October 15, 2010 Share Posted October 15, 2010 ah good and take your time which its important to take time as you said so though Link to comment Share on other sites More sharing options...
Pete M Posted October 15, 2010 Share Posted October 15, 2010 yeah, I needed the garage space for something else and so rushed it the first time and forgot to re-tighten the bolts once the truck's weight was on them. :doh: Link to comment Share on other sites More sharing options...
Jakeman17 Posted October 15, 2010 Share Posted October 15, 2010 Started it for the GF Link to comment Share on other sites More sharing options...
comanche12 Posted October 15, 2010 Share Posted October 15, 2010 yeah, I needed the garage space for something else and so rushed it the first time and forgot to re-tighten the bolts once the truck's weight was on them. :doh: nice job :thumbsup: just kidding :no: at least everything stay together and nothing seriosuly happened expect the rear axle twisted Link to comment Share on other sites More sharing options...
aabmike Posted October 16, 2010 Share Posted October 16, 2010 Installed an XJ Factory front skid plate and bought a pair of 97+ Doors and a complete dash Got my work cut out for me, going to do the doors before the first snow hits I hope, and the dash this spring. :nuts: I will post pics as I go!! Link to comment Share on other sites More sharing options...
MjPioneer Posted October 16, 2010 Share Posted October 16, 2010 Compiled my list of things to do before the snow comes. New rocks New floor pans New tail pipe Replace transmission Remove and test Transfer Case Remove all rust on unibody Undercoat the crap out of it Bed line new rockers/floors/wheel wells :grrrr: Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now