krustyballer16

I'll add a second part to this, maybe easier... How much do all the bolts weight? 20 sets. I'll even show you what a set consists of. I'll give 10% of the weight off or refund it back to someone that has ordered brackets (I'll do the same for the above challenge too) Sent from my SM-G892A using Tapatalk

Gotcha. They're the seats with the "curved" track. But all he has to do is swap to mj "pedestals" right Sent from my SM-G892A using Tapatalk

You're talking about the part that actually bolts to the floor? That is shown in the pic as xj? Just making sure cuz theres a lot of confusion about my mj seat brackets and what they work with Sent from my SM-G892A using Tapatalk

No may challenge. June's challenge has to do with the seat and roll bar brackets I'm making. Whoever can guess closest to the weight of these bare steel parts wins. 20 sets of each bracket. Itll be 5% of the actual weight off of whatever prize we decide on. Shelbyluvv can't participate cuz he already knows from a few weeks ago. Ha! Sent from my SM-G892A using Tapatalk

Winner of april! Sent from my SM-G892A using Tapatalk

Put roll bar in bed, center it up, drill holes thru bed, install brackets. Done. Lol Sent from my SM-G892A using Tapatalk

They're here! Just gotta put nuts on the roll bar brackets. Seat brackets are ready to box up and send out! Gonna try to get all the pre orders done this week. Sent from my SM-G892A using Tapatalk

Nope! Not even close and nobody makes good replacements. I've had to make all mine Sent from my SM-G892A using Tapatalk

Ya, that option is probably the cheapest. I run a 7 pin plug from rural king with mounting plate and then I have a bunch of 4 pin adapters. I was gonna have to slap you for a kit that cost more than the hitch. Lol. The cheap universal wiring harness is cheap and easy to wire in. Sent from my SM-G892A using Tapatalk

Well if you got it in one then its gotta be out there! I'll look into that Bo said pool noodle, moving blanket, shrink wrap and cardboard. Lol. And I've possibly got a full bench seat, dash and full center console to ship to Washington state... Sent from my SM-G892A using Tapatalk

Sold my xj Lund visor and not sure how to package it so it makes it to Texas safely... 58"x16"x6". Anybody done anything similar? Sent from my SM-G892A using Tapatalk

That's what@shelbyluvv has said. Quality. But they don't seem excessively expensive Sent from my SM-G892A using Tapatalk

Interested in opinions too. I'll be needing a good ride on my 2wd LS swap mj when it's done Sent from my SM-G892A using Tapatalk

I'm making one and throwing it In with Mark's hitch he just ordered from me. He also bought a set of rollbar brackets from me. Always happy to help a fellow member out. Sent from my SM-G892A using Tapatalk

Same thing! Replaced 2 slave cylinders and a master. Dropped the tranny (which sucks with my aluminum adapter plate) twice, asked all the local shops. Then finally found the broke pedal. Good thing it would go into gear still and drive. Just had to move a few feet at a time. Torquey little bastard. Sent from my SM-G892A using Tapatalk

You talking about the "sky blue" color? Baby blue Sent from my SM-G892A using Tapatalk

You needing one too? Lol Sent from my SM-G892A using Tapatalk

$190+SHIPPING. Got one ready to ship Tuesday. Sent from my SM-G892A using Tapatalk

Bumper for sale! I built it to replace my nates 4x4 I sold. (Which I shouldn't have!) Frame brackets run all the way back to the 3/4" bolt. D rings are tied into frame brackets. Main part is 1/4", outer wings are 3/16". Powdercoated Dixie Chopper textured black. $450 shipped obo. Can include powdercoated fairlead for $25 extra. I'll answer any questions about it. Sent from my SM-G892A using Tapatalk

I win too! My guess was right Sent from my SM-G892A using Tapatalk

My only guess would be under the seat...? I've never seen anything like that before. Unless I just can't picture its orientation in the truck... Sent from my SM-G892A using Tapatalk

This rear bumper WILL NOT work with my hitches without slight modifications. If you don't have a hitch and want one with this bumper, order one with it. If you already have my hitch and want this bumper, youll just have to make 2 5/16" notches/cutouts for my mounting plates to slide/fit into. I will do it to this bumper so I can walk other people through it too. I plan to make a hidden hitch behind the license plate. Sent from my SM-G892A using Tapatalk

O. Ya. I'll probably turn it into a write up and then max can turn it into instructions in his own format or just use mine. I'll have tons of pictures and comments with mine. We've been working together on it as I build it Sent from my SM-G892A using Tapatalk

I'm building the first one and writing instructions for a DIY version that will be available soon. The welded version is already out and available for purchase. Check out their website. Sent from my SM-G892A using Tapatalk

This is Dirtbound Offroad's bumper.... Sent from my SM-G892A using Tapatalk