fiatslug87

http://www.comancheclub.com/forums/viewtopic.php?f=3&t=13813&hilit=matchbox You can also do this with Cherokees that are ~1:32 scale (5 1/2 inches long) instead of 1:64 that are plastic and made by TootsieToys.

I ended up replacing the socket with a functional one from a spare harnesses (I couldn't find a replacement at the local parts stores :grrrr: ), now it works properly. I guess all three harnesses had bad left sockets, what are the odds :hmm: ? Time to hit the Lottery???

I corrected my earlier post, the back tube goes to the intake in front of the TB. here's the vacuum diagram from the '90 FSM.

But wouldn't that mean all three harnesses have the same problem? I'll try it tomorrow.

Same, the '87-90 parts catalog only shows one PN 55007123 SEAL, Rear window.

These are the vacuum lines for the RENIX engines from NAPA. The third one is the one you're asking about. 7151367 from cover to bracket ~$25 7151366 from bracket to air box ~$25 7151365 from cover to intake in front of TB ~$10

I've searched but I'm still stumped. '89 MJ 1- Left front parking light will not illuminate (right is good) 2- Works when signaling/flashers, although dim (only one filament is on) 3- Left turn indicator dash light is on when parking/headlights are on 4- Bulb is OK (switched in one that worked) 5- Swapped in two other harnesses (I KNOW one worked when pulled 3 months ago) still the same 6- According to the wiring diagram (see below) the left uses pin 3, the right pin 8, and both share pins 4 & 5 7- Voltages were the same at pins 3 & 8 (engine side) What am I missing? All three harnesses can't have the same bad socket or short, can they?

In your garage Mike? Every time I see your fleet it's always parked on the street. :yes: If they weren't on the street, how would the rest of the world enjoy them? :hmm: But for a '91 ELIMINATOR I would make room in the garage :brows:

At least take a look at it, must be rust free in Dallas right? If that was in my town, it would be in my garage by now. :yes:

Have a Happy Birthday, what's left of it!!!

I don't know what a fair price is, but that bumper is not a factory MJ bumper. Factory one look like this.

Cool! I've had my Ball Python from a hatchling for 13 years now, her name is Slinky.

http://cgi.ebay.com/ebaymotors/1986-92- ... ccessories

Garage wall art? :dunno:

Up near Vacaville,CA I think... Father in Law of a fellow 4x4Club member has a ranch up there and a collector of many vehicles. Vacaville, great maybe I'll see it sometime, it's the next city east. Do you know if he has other Comanches?

Where is it ending up?

Here's an '86 cream/tan over dark blue.

Have one, pm sent.

http://www.comancheclub.com/forums/viewtopic.php?f=3&t=15780&hilit=comanche+but+not&start=60 p5, 6th post down

Hey JeepNut, are you still in the South Bay? I grew up in Santa Clara.

Isn't that metric? 265/75R15 is approximately 31x10.5R15 Use this to compare sizes. http://www.1010tires.com/tiresizecalculator.asp

Just got it hooked up and did a dry run (radio not put back together) and it works great just like XJguy said. I used the line from earphones and the female connectors from an old wiring harness I had laying around. Now I need to get this one finished and repeat for the other two MJs. Thanks XJguy nice upgrade! :cheers:

I thought he was using all HO except for the head, my mistake. Is an HO block any different than the RENIX block?

They look different and the 850's are larger. Both came with clear or amber lenses (maybe not on Jeeps, I'm not sure). I've seen 750s in chrome and black, 850s I've only seen in chrome. 850: http://cgi.ebay.com/ebaymotors/Marchal-850-GT-Fog-Lamps-Driving-Lights-Jeep-Wagoneer-_W0QQcmdZViewItemQQhashZitem230ce1fdd5QQitemZ150539992533QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories 750: http://cgi.ebay.com/ebaymotors/Rare-Marchal-750-fog-driving-lights-Euro-New-full-set-_W0QQcmdZViewItemQQhashZitem255ff3b481QQitemZ160523596929QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

Wasn't one advantage of the HO the new head design?