jdog

I do not believe you have to correct wiring harness for an automatic, you for sure do not have a tcm. If you decide to swap the whole harness you will essentially be doing a ho swap. It has been done but you gotta get everything.

How old is the coolant? I've heard strange stories that the coolant gains electrical properties and could be screwing with you. Only other thing would be swap the temp sensor, see if it remains. How's the gauge ohm out?

You can sand down the inside of the bushing. What bushings did you buy?

Cause that's when his mechanic was looking for something

Yeah our fridge went out day before Thanksgiving.

That looks tasty

Nope no second socket

Nope no second one, there was a optional light that would clip onto that lighter here

For the light, it would clip on top of the lighter housing

5 is headlamp delay Iirc the single wire is for the optional cigar lighter,

You don't want the emission timer, it was a one time user item that would turn on a light. No use for it. It could have also been to a switch on the clutch or the brake for 3

2 cruise 3 either speaker or well lights 4 headlight delay 5 gauge cluster 6 cargo light 7 clock 8 ? btw year is helpful if you fill out your signature it helps us out a lot

The front running lights are only on in position 2 iirc

Id say modify, it's your truck do what you want with it, most of the time you can go back to stock. You can save the parts that comes off of it if you have to room, but it all comes down to what you want and desire

Looking good

My condolences to you and your family, the link is broken

Year? To make this easier on us could you please fill out your signature, link is in my signature

Make sure they didn't plug the red wire into the coil

I would check the front harness connector behind the airbox.

Orange wires with spots for bulbs are for the illumination of the switch tops/what the switch does. Yep auto tps, tells the tcm where the throttle is at. Trans and roll bar lights iirc go on the right of the column. And Yea clock connector

Check the trans fuse in the block for the reverse lights

Congrats on the new job

2nd Pic is bed light and fog lights iirc. 3rd Pic. Black connector is headlight delay The connectors connected together is the wiper, to get delay it needs the delay box in the middle. 4th Pic. The orange wires are lights, square end is for cigar lighter light. 5th you are missing egr solinoid 6th see 2nd 7th no clue po installed wire 8th connector for auto tps 9 th is a vacuum line

Happy Thanksgiving to you and your family.