Pete M

Comanche buckets go right in. XJ buckets will need to be attached to your bench's floor brackets. XJ curved sliders will raise your butt up by a couple inches (not good for tall people). Straight sliders are the same as MJ bucket sliders. buckets from 4door XJs don't lean forward. MJ and 2door XJ buckets do. in bucket-equipped MJ/XJs, the female side of the seatbelt will have a sheath around it so that it stands up and doesn't fall to the floor all the time. be forewarned though, removing the female side of the seatbelt can be challenging on a rusty Jeep. The bolt has a tendency of just snapping off and leaving you with no seatbelt at all :( and speaking of rust, be sure to spray the bench floor bracket bolts for days ahead of time to reduce the chance of snapping them. (that goes for all MJs, not just the rust-belt ones)

might want to get him a pic that doesn't include a trash can. :yes: nice job patches! :thumbsup:

the limited slip was still an option, even with the big ton package.

every update I've given so far has turned out to be a false alarm so I hesitate to do so, but a sample coozie from a new company is apparently on its way for verification.

all 458s :D

what did the emblem come from?

it may prevent rust, or it may prevent you from noticing any rust until it's really bad. :(

not including the BFH, I'll go with the 12" long piece of 3/4" conduit that fits over ratchet handles and smaller wrenches. :yes:

haha! neat idea! :yes:

you'll need to talk to Alexia about the actual creation. :thumbsup: way outta my realm of knowledge.

:rotf: Co2 tank and fire extinguisher

keep at it, you'll get it. :D the link you used in the first post isn't correct.

I carry good stuff (Craftsman and Cobalt mostly), since that's what I own. I hate breaking cheap tools. :fs1: got 4 ammo boxes in the back. :thumbsup: though I don't have tools in them. just spare parts and spare liquids.

dunno. how many cars do you think can fit on 2 football fields?

I sure hope he's got another room available to him. the two I saw were quite full.

right-click on the image you want, select "copy image location", then come to the forums and click the photo tag and paste that address into the pop up window. :thumbsup: the address you paste will look like this (except without the spaces I threw in): http ://pic20.pi cturetrail.co m/VOL1310/13549 803/24251433/404837074.jpg

any photos of how you connected it all to the uniframe?

very nice :D is that handle for the tailgate, or a spanner bar to connect the back of the cage? need more pics!

just 2. Aaronbtxnc handled our last shirt/hoodie order (and still has hats left). I do the stickers/coozies/etc. biggest hurdle is that demand is low and preferences for a product vary wildly. the second is that I can't afford to have product on hand, sitting around waiting for someone to buy. waaaaay too much money for a broke guy like myself to invest. Coozies alone are going to be over 200 bucks and the CC bank account is way less than that (just paid the annual website fees). that's why we do pre-paid batch orders on shirts/hoodies/hats. I tried my hand at it and we lost money. Other members have stepped up and handled an order or 2, but they eventually lose their ambition after discovering the "joys" of selling mail-order. I keep doing the stickers because there's a lot less on the line (even so, I just bought 65 bucks worth of stickers). I've thought about doing one of those online buy-as-you-go sites, but haven't put any serious effort into the research.

people suck. it is possible on some trucks with properly working part to reach up from underneath and yank on the connection rods for the hood latches and get the hood to pop.

when in doubt, try baby powder. sprinkle it around and the water will make trickles through the dust leading you back to the source. but this will only work if it's actively leaking. :( you might have found 10 years worth of dribbles from a tiny leak.

clearly the problem here is you need a gas furnace. too much time wasted choppin' up fuel.