Jump to content

Pete M

Administrators
  • Posts

    40047
  • Joined

  • Last visited

  • Days Won

    114

Everything posted by Pete M

  1. after 10 total posts the classifieds will open up to you. (it's an antispammer measure) if you start a build thread about your truck you can get there in 5 minutes.
  2. ok. just remember that if we use the same 10% ratio of surviving MJs there are less than 700 total HO MJs left. you're out in the northwest now. there has to be clean beds around you somewhere.
  3. wait, why are we tearing apart a decent looking 91?
  4. nice need more pics of the frame transition!
  5. dude's got 3200 items on ebay. I've got single digits and I feel like I keep checking my email every few minutes so I can jump on getting them out the door. lololololol
  6. the link in my signature has some of the sensor test procedures.
  7. aftermarket. they were made by Lund. I own 2 of them and am trying to get one of them replicated so they can be made available again.
  8. that is a reused code. the code is correct, but the meaning you see applies to a newer Jeep.
  9. https://www.ebay.com/itm/195165355722
  10. I'm talking about the tiny ones at the very front, not the big ones with plugs. unless you really need the big ones for something.
  11. try not to plug up the drain holes.
  12. I'd do a 4.0L 91-95 XJ with OBD1 you'll need to swap pretty much everything so it depends on how much project you want. but then slapping in new crank bearings on a 2.5L isn't all that hard of a job.
  13. welp, the work is done. but I wasn't able to verify it's fixed due to some other issues.
  14. it's for one of each side. but only the longbed needs that weird cutout.
  15. if anyone has a shortbed, I recommend buying 2 passenger sides.
  16. they pop up on ebay from time to time.
  17. seems straight forward enough. it's an 88 4.0
  18. nothing like some new carpeting to freshen up an old truck
×
×
  • Create New...