Jump to content

Under Dash Lights


Recommended Posts

6 minutes ago, NEO auto said:

I didn’t realize Comanche’s had this feature.  Where are the lights positioned?

The lights mount on the lower dash panel with One in each footwell.

Link to comment
Share on other sites

11 hours ago, WahooSteeler said:

Manche757, factory pigtail should be in place. LED's really make a difference too. 

Do you have the LED bulb number?  I assume you got it at an auto parts store?  

Link to comment
Share on other sites

3 hours ago, Manche757 said:

Do you have the LED bulb number?  I assume you got it at an auto parts store?  

 

I bought mine online. The stock bulb is a 906. You can get LED replacements at any auto store for these. 

 

While you're at it though, you should absolutely install LED projector bulbs for your reverse lights. When I say it's like night and day, I mean it. There are tons of brands out there, mostly chinese made but look for ones that have the Cree brand chip in them, they are supposedly the best. Also, make sure they are the "projector" type, they have a little glass bulb at the end that helps disperse the light. Also, make sure the base does not have a flange at the top of it or it won't go in to the socket far enough. The brand I got on eBay was Genssi at Hornbrod's suggestion after he raved about them. LED selection in auto stores is getting better all the time so you might find these 1156 projector types local now. 

 

Speaking of Hornbrod, found a LED conversion chart once posted by him. This should help..........

LED Conversion Chart.pdf

Link to comment
Share on other sites

If you can't find the pig tail that runs over to the passenger side.I stole mine off a 79 J10 wagoner.I took the hole harness,ran it under the dash,and put the screw's back in them.Then just cut the stock plug off,and put flat(paddle type ends) plugs right into the original harness under the dash.Also has the original plastic covers,and can be mounted in the outside two lower dash screw's just about in the original locations.It was an easy fix,and only took about a 1/2 hour taking them out,and putting them in my truck.

Link to comment
Share on other sites

59 minutes ago, WahooSteeler said:

 

I bought mine online. The stock bulb is a 906. You can get LED replacements at any auto store for these. 

 

While you're at it though, you should absolutely install LED projector bulbs for your reverse lights. When I say it's like night and day, I mean it. There are tons of brands out there, mostly chinese made but look for ones that have the Cree brand chip in them, they are supposedly the best. Also, make sure they are the "projector" type, they have a little glass bulb at the end that helps disperse the light. Also, make sure the base does not have a flange at the top of it or it won't go in to the socket far enough. The brand I got on eBay was Genssi at Hornbrod's suggestion after he raved about them. LED selection in auto stores is getting better all the time so you might find these 1156 projector types local now. 

 

Speaking of Hornbrod, found a LED conversion chart once posted by him. This should help..........

LED Conversion Chart.pdf 65.48 kB · 1 download

Ok Wahoo, what about headlights. My dim ones are so dim they are not safe but the full beams are fine.  What are you recommending for those?

Link to comment
Share on other sites

Manche757, I'm no expert but if you haven't done the headlight relay harness, that is generally considered a great solution to dim headlights whether you stick with standard headlamps or go LED. If you still aren't satisfied with the light output after that, maybe consider LEDs but they can get expensive and the really cheap ones seem to be just that....cheap. Certainly a subject that has been debated 100 times over on here so a search for those threads would be worth your reading. I have the headlight relay but have not installed it yet, definitely on the priority "to do" list in the next month or two. 

Link to comment
Share on other sites

Definitely do the headlight relay harness first.  Not only does it improve the headlight output but, even better, it takes the amperage off the headlight switch.  Even if it did nothing for the headlights, it’s worth it to prevent a potential fire.

You can buy a pre-made harness or make up your own.  I believe one of our members posted his harness build.  

Link to comment
Share on other sites

The trucklite knock off's on Amazon are great, inexpensive upgrades to the headlights. Plus the relay upgrade has made a night and day difference for me. I love LED's and am slowly swapping all of my lights to them. Including making custom marker/turn signals out of 3/4" LED'S. @Keyav8r how much for a set of those courtesy lights?

IMG_20190425_152853.jpg

Link to comment
Share on other sites

757, as Keyav8r pointed out above, there is a lot of amperage running through the headlight switch regardless if you are running LEDs so it's a critical upgrade no matter what. They run @$15 on eBay and that might save you the $100-300 you would spend on good LED headlamps if you are satisfied with the increased output from your stock units. 

Link to comment
Share on other sites

16 minutes ago, WahooSteeler said:

$100-300 you would spend on good LED headlamps

Or $633.00 

 

As of last night I have the money for new tires that I'm getting on Wednesday, so, as of today I began saving for the JW Speakers. 

 

Regardless of LED or not, you need a good clean power supply, harness is a must. 

 

 

As for foot well lights, look to aftermarket LEDs, accent lights or 'driving lights' or DRLs. Those work much better. 

 

5" x 7" Chrome High And Low Beam Headlight

Link to comment
Share on other sites

I believe I collected the ones I have from pre ‘90 XJs when I had the ‘88 MJ.  I think the ‘91 Eliminator had them when I got it from Rich, but since I have CRS and I’ve slept since then I can’t be 100% sure about that.

I’ll take another look at them to see if the plugs are all the same.

Link to comment
Share on other sites

21 hours ago, fiatslug87 said:

Just remember the plugs are different for 1990 and up.

Do you have a pic of the connectors that would be on the lights for an 87 MJ  and an 89MJ?

 

I have wondered about your name.  Fiat slug suggest that you really, really like Fiats especially an 87 in particular.  Fiats Lug suggest you are a huge  musclehead dragging around excess muscle that likes Fiats. Either on target?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...