Pete M Posted December 2, 2019 Share Posted December 2, 2019 you can also buy the tint and apply it yourself. It requires some "being careful" but it's not rocket science. plus you can practice on the old windows. Link to comment Share on other sites More sharing options...
Drahcir495 Posted December 2, 2019 Author Share Posted December 2, 2019 I thought about that too. Just would need to figure out the level of tint Link to comment Share on other sites More sharing options...
Drahcir495 Posted December 3, 2019 Author Share Posted December 3, 2019 Ouch! Pressing out a bearing with this thing yesterday -> And it suddenly gave way . Unfortunately I was not quick enough and it caught one of my fingers. It crushed it a bit on the steel below. Obviously it hurt, but not much pain at all since then? I am definitely loosing that nail. It is floating around on that finger Two days later -> December 24th my son pulled of the nail -> Link to comment Share on other sites More sharing options...
mjeff87 Posted December 3, 2019 Share Posted December 3, 2019 Ouchy. If blood starts welling up underneath the nail (and it will.......), heat up a straight pin or sewing needle with a flame and push it thru the center of the nail. If it's hot enough, it'll go thru like butter. Might want to wear a pair of goggles and a shirt you really don't care about when it does though Link to comment Share on other sites More sharing options...
Drahcir495 Posted December 3, 2019 Author Share Posted December 3, 2019 Omg Jeff - that sounds so flipping painful! I guess if there is blood under there it should be a pocket? I would like to see the blood shoot out though Link to comment Share on other sites More sharing options...
eaglescout526 Posted December 3, 2019 Share Posted December 3, 2019 Well. You ain’t working on a Jeep unless there is blood and swearing. Link to comment Share on other sites More sharing options...
Drahcir495 Posted December 3, 2019 Author Share Posted December 3, 2019 8 minutes ago, eaglescout526 said: Well. You ain’t working on a Jeep unless there is blood and swearing. So true Link to comment Share on other sites More sharing options...
mjeff87 Posted December 4, 2019 Share Posted December 4, 2019 You'd think it would hurt like Hades, but the actual pressure from the blood under the nail building up is an attention getter. As soon as that needle tip breaks thru (don't jam it in like you're trying to stab Dracula in the heart with a wooden stake, just ease it in and spin it with your fingertips to try and bore it in slowly and carefully), all that pressure will be relieved. Probably in spectacular fashion too Trust me on this one Rich. I've smashed my fair share of nail beds/fingertips. Even chopped off one of my toes, too, via my TJ. LOL. Link to comment Share on other sites More sharing options...
Drahcir495 Posted December 4, 2019 Author Share Posted December 4, 2019 45 minutes ago, mjeff87 said: (don't jam it in like you're trying to stab Dracula in the heart with a wooden stake, Trust me on this one Rich. I've smashed my fair share of nail beds/fingertips. Even chopped off one of my toes, too, via my TJ. LOL. You crack me up. If it comes to that point I will do it . Right now the blood is seeping out the sides of the nail. I just hope the nail grows back. 😳 your toe! We’re they able to reattach it? Link to comment Share on other sites More sharing options...
Pete M Posted December 4, 2019 Share Posted December 4, 2019 it'll grow back. I've lost a few nails over the years. not a whole toe though. Link to comment Share on other sites More sharing options...
mjeff87 Posted December 4, 2019 Share Posted December 4, 2019 I didn't chop it the whole way off, but about 95%. Imagine flipping the top open on a zippo lighter....the tip was just hanging there like that, hinged by a small piece of skin on the bottom. It was the only time I ever called 911 on myself....got a nice little emergency ambulance ride to the ER. The ER doc was able to sew it all back together, but it's crooked lol. But hey, at least I still have a toe Link to comment Share on other sites More sharing options...
Drahcir495 Posted December 4, 2019 Author Share Posted December 4, 2019 That will teach to not wrench in flip flops . I think I would actually pass out, cracking my head on the work bench on my way down. Link to comment Share on other sites More sharing options...
derf Posted December 4, 2019 Share Posted December 4, 2019 There may have been an episode where "someone I know" was trying to take the door off his wrangler and it was stuck. When it let go, that individual may or may not have lost his grip on the door and dropped it on his toes while wearing sandals. It may have broken two of the toes and required about 8 stitches. But I'm not admitting anything. Link to comment Share on other sites More sharing options...
mjeff87 Posted December 5, 2019 Share Posted December 5, 2019 That is exactly what happened to me, lol. Half steel doors, soft uppers. Lifted the door off the hinges, sat it on the rocker to regroup, then grabbed it by the upper. Gravity prevailed, and I was still holding the upper in my hands when the door guilotined my right foot while in flip flops. Crushed my big toe (broke it at the joint), the nail popped right off lol. Chopped half of the second toe about 95% off.....blood everywhere. Good times. Glad I'm not the only one who's done that I no longer wear flip flops or sandals in the garage. Link to comment Share on other sites More sharing options...
derf Posted December 5, 2019 Share Posted December 5, 2019 Yeah, I have steel toe boots I wear when I'm working in the garage. Link to comment Share on other sites More sharing options...
Drahcir495 Posted December 5, 2019 Author Share Posted December 5, 2019 13 hours ago, derf said: There may have been an episode where "someone I know" was trying to take the door off his wrangler and it was stuck. When it let go, that individual may or may not have lost his grip on the door and dropped it on his toes while wearing sandals. It may have broken two of the toes and required about 8 stitches. But I'm not admitting anything. 😂 Link to comment Share on other sites More sharing options...
Drahcir495 Posted December 5, 2019 Author Share Posted December 5, 2019 Lesson here; Jeep doors are possessed! I can definitely see how this could happen. Funny now, but I am sure nobody was laughing then. If somebody could sue over hot coffee and win. I am sure a big payday was a real possibility, but I know that is not the kind of people we are Link to comment Share on other sites More sharing options...
mjeff87 Posted December 5, 2019 Share Posted December 5, 2019 Stupidity hurts......and you shouldn't get paid for being stupid (in my case, anyway). Link to comment Share on other sites More sharing options...
Drahcir495 Posted December 9, 2019 Author Share Posted December 9, 2019 Busy day for me -> Picking up the CJ’s. Can no longer store them at work , so they are coming home. Good timing since my Cherokee is getting closer to being where I want it to be. I always have to be working on something. You can’t imagine all the Jeep stuff I have. Extra Comanche stuff too. Link to comment Share on other sites More sharing options...
Pete M Posted December 9, 2019 Share Posted December 9, 2019 collecting parts is addictive Link to comment Share on other sites More sharing options...
JMO413 Posted December 9, 2019 Share Posted December 9, 2019 25 minutes ago, Pete M said: collecting parts is addictive Agreed! 1 hour ago, Drahcir495 said: Busy day for me -> Picking up the CJ’s. Can no longer store them at work , so they are coming home. Good timing since my Cherokee is getting closer to being where I want it to be. I always have to be working on something. You can’t imagine all the Jeep stuff I have. Extra Comanche stuff too. Love the CJ8 I have a super weak spot for them! Link to comment Share on other sites More sharing options...
Drahcir495 Posted December 9, 2019 Author Share Posted December 9, 2019 1 hour ago, Pete M said: collecting parts is addictive I am running out of space and somebody is not happy 1 hour ago, JMO413 said: Agreed! Love the CJ8 I have a super weak spot for them! Thank you. I do too. Link to comment Share on other sites More sharing options...
Drahcir495 Posted December 22, 2019 Author Share Posted December 22, 2019 I recently went through the shop where I had two CJ’s and a 8x12’ area stacked with Jeep parts. Needed to get them out of there for product expansion. Found stuff I do not remember having lol. I thought the MJ stuff was long gone?? Look at what I found -> Quite the hoarding stash! So much other stuff too. Even have a waggy header that was in the pile. I know my truth; the addiction is real Link to comment Share on other sites More sharing options...
Drahcir495 Posted December 24, 2019 Author Share Posted December 24, 2019 Got off early from work today and I was able to hit the LKQ right before they closed. I knew what I wanted and it was only going to be taking off two nuts and four bolts, so they were kind enough to let me slide. They had an 1996 up-country XJ in the yard -> I wanted to get the front sway bar for BUXMJ and I got it -> I will have to bring it into work Friday to check the diameter with the dial calipers. Want to make sure it’s the larger bar. Link to comment Share on other sites More sharing options...
buxmj Posted December 24, 2019 Share Posted December 24, 2019 Rich, I thought you already had one in your possession! That is really cool and will definitely reimburse you! Thanks for grabbing it, especially on Christmas eve, wow! Buck. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now