Jeep Driver Posted April 25, 2018 Share Posted April 25, 2018 I need 4 switches that fit the MJ dash bezel, as in stock size. What aftermarket switches are you guys using? Prices? From whom? If lighted (blue), have you found ones that are not annoyingly bright? Thank you. Link to comment Share on other sites More sharing options...
MeanLemons Posted April 26, 2018 Share Posted April 26, 2018 https://www.shapeways.com/shops/gctent Link to comment Share on other sites More sharing options...
Jeep Driver Posted April 26, 2018 Author Share Posted April 26, 2018 OK, I'm guessing there is nothing that fits our dash panels like the stock switches do? Link to comment Share on other sites More sharing options...
johnj92131 Posted April 26, 2018 Share Posted April 26, 2018 54 minutes ago, Jeep Driver said: OK, I'm guessing there is nothing that fits our dash panels like the stock switches do? Looks to me like these are supposed to fit the 84-96 XJ/MJ: https://www.shapeways.com/shops/gctent?section=84-96+Switch+Panels&s=0 Link to comment Share on other sites More sharing options...
MeanLemons Posted April 26, 2018 Share Posted April 26, 2018 No I’m just saying that he made panels to use Toyota switches, TJ switches etc. however with using our oem panels, I have no idea. Sorry I’m not much help with that Link to comment Share on other sites More sharing options...
ParadiseMJ Posted April 26, 2018 Share Posted April 26, 2018 I bought this on ebay a while ago...a long while. It's not stock, but it's inconspicuous. It wasn't expensive, it fits in the "coin holder" just behind the shifter, right of the t-case shifter. It comes all wired up and ready. I put a 30amp circuit breaker to the power line through a 30 amp relay. Then to the lights I'm using...or not. The only thing besides supplying power and ground is cutting out the "coin holder" (required). It comes out very clean. The LED's are not too bright. If I hold my hand over it the "beams" of LED light shine straight up so They're bright but definitely not obnoxious at all P.S. the switches, bezel and wiring inside the panel are included. I like torx heads. LOL Link to comment Share on other sites More sharing options...
HOrnbrod Posted April 26, 2018 Share Posted April 26, 2018 Crappy pic, but a while back this Ebay seller, uaintl-2008 , had a crap load of these switches. I grabbed about six of them @ ~$20/ea as I recall. They fit the standard XJ/MJ single pole ON/OFF connectors, snapped in the bezel as they should, have the indicator LED, and work fine. They were 20A switches in a Mopar box. Don't know if he has any more, but would be worth checking with the seller... Link to comment Share on other sites More sharing options...
Swampy Posted April 26, 2018 Share Posted April 26, 2018 idk about what size would fit the stock piece but I do know that they make a panel where the clock would go for 4 rocker/carling switches Jeep-Cherokee-Xj-Mj-84-96-Switch-Panel-Clock-Panel-Replacement-4x-Carling Link to comment Share on other sites More sharing options...
Jeep Driver Posted April 26, 2018 Author Share Posted April 26, 2018 12 minutes ago, HOrnbrod said: Crappy pic, but a while back this Ebay seller, uaintl-2008 , had a crap load of these switches. I grabbed about six of them @ ~$20/ea as I recall. They fit the standard XJ/MJ single pole ON/OFF connectors, have the indicator LED, and work fine. They were 20A switches in a Mopar box. Don't know if he has any more, but would be worth checking with the seller... I searched his store, he has no switches. But, he does have a lot parts though. Thanks. Link to comment Share on other sites More sharing options...
HOrnbrod Posted April 26, 2018 Share Posted April 26, 2018 Shoot him an email - may still have some. Link to comment Share on other sites More sharing options...
Jeep Driver Posted April 26, 2018 Author Share Posted April 26, 2018 Done. Link to comment Share on other sites More sharing options...
DirtyComanche Posted April 26, 2018 Share Posted April 26, 2018 These fit the stock holes. With the flash from the camera you can see where I blacked out the wiper logo. They're complete generic, tons of them on Amazon. https://www.amazon.ca/Amarine-made-Waterproof-Marine-Rocker-Switch/dp/B0727X2CHK/ref=sr_1_4?ie=UTF8&qid=1524719936&sr=8-4&keywords=rocker+switch&dpID=41HeDfNIx8L&preST=_SY300_QL70_&dpSrc=srch Finding ones with the lettering you want can be a challenge though. Link to comment Share on other sites More sharing options...
Swampy Posted April 26, 2018 Share Posted April 26, 2018 8 hours ago, DirtyComanche said: These fit the stock holes. With the flash from the camera you can see where I blacked out the wiper logo. They're complete generic, tons of them on Amazon. https://www.amazon.ca/Amarine-made-Waterproof-Marine-Rocker-Switch/dp/B0727X2CHK/ref=sr_1_4?ie=UTF8&qid=1524719936&sr=8-4&keywords=rocker+switch&dpID=41HeDfNIx8L&preST=_SY300_QL70_&dpSrc=srch Finding ones with the lettering you want can be a challenge though. That looks good man. I may do the same once I figure out what switches I'm going to get Link to comment Share on other sites More sharing options...
coolwind57 Posted April 26, 2018 Share Posted April 26, 2018 I'm wiring in my fog lights soon and I couldn't resist ordering this one: Link to comment Share on other sites More sharing options...
Swampy Posted April 28, 2018 Share Posted April 28, 2018 On 4/26/2018 at 12:10 PM, coolwind57 said: I'm wiring in my fog lights soon and I couldn't resist ordering this one: Thats the one I want to get for my light bar eventually Link to comment Share on other sites More sharing options...
fiatslug87 Posted April 28, 2018 Share Posted April 28, 2018 NAPA has some https://www.napaonline.com/en/p/ECHFL101?interchange=1 Link to comment Share on other sites More sharing options...
johnj92131 Posted April 28, 2018 Share Posted April 28, 2018 On 4/25/2018 at 10:20 PM, DirtyComanche said: These fit the stock holes. With the flash from the camera you can see where I blacked out the wiper logo. They're complete generic, tons of them on Amazon. https://www.amazon.ca/Amarine-made-Waterproof-Marine-Rocker-Switch/dp/B0727X2CHK/ref=sr_1_4?ie=UTF8&qid=1524719936&sr=8-4&keywords=rocker+switch&dpID=41HeDfNIx8L&preST=_SY300_QL70_&dpSrc=srch Finding ones with the lettering you want can be a challenge though. Dirty, Please tell me where/how you got the gauge into the clock panel? I would like to mount an EGT gauge in that location. Thanks, Link to comment Share on other sites More sharing options...
coolwind57 Posted April 28, 2018 Share Posted April 28, 2018 6 hours ago, fiatslug87 said: NAPA has some https://www.napaonline.com/en/p/ECHFL101?interchange=1 Interesting. Drive to S. Indiana and save nearly $2, fiatslug87. Link to comment Share on other sites More sharing options...
Dzimm Posted April 28, 2018 Share Posted April 28, 2018 Just a curious question here, if those oversized switches (switch with sasquatch above) are sold for both the 96- and 97+ XJs, would that mean that the 97+ style rocker switch would potentially fit the 96- bezel? Maybe just not look quite as finished around the edges? Link to comment Share on other sites More sharing options...
fiatslug87 Posted April 28, 2018 Share Posted April 28, 2018 This place makes custom laser etched switches. http://www.ch4x4.com/product/ch4x4-custom-laser-etched-rocker-switches/ Link to comment Share on other sites More sharing options...
Jeep Driver Posted April 28, 2018 Author Share Posted April 28, 2018 10 hours ago, fiatslug87 said: NAPA has some https://www.napaonline.com/en/p/ECHFL101?interchange=1 Perfect, however, at $160+, that shit ain't gonna happen. Link to comment Share on other sites More sharing options...
Jeep Driver Posted April 28, 2018 Author Share Posted April 28, 2018 51 minutes ago, fiatslug87 said: This place makes custom laser etched switches. http://www.ch4x4.com/product/ch4x4-custom-laser-etched-rocker-switches/ Interesting. Link to comment Share on other sites More sharing options...
fiatslug87 Posted April 28, 2018 Share Posted April 28, 2018 15 minutes ago, Jeep Driver said: Perfect, however, at $160+, that shit ain't gonna happen. But if you live near Indiana you can save $8 Link to comment Share on other sites More sharing options...
Jeep Driver Posted April 28, 2018 Author Share Posted April 28, 2018 Actually, NAPA will give you 10% just for asking. And, if you know the counter guy well enough, he'll place your order under a 'garage' account which will give you a jobber price. That said, they ain't gonna come down enough in price for me to ask. Link to comment Share on other sites More sharing options...
Jeep Driver Posted April 28, 2018 Author Share Posted April 28, 2018 I just called, NAPA, NLA. I probably will go through NAPA though, they have a lot to choose from. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now