Jackrabbit41 Posted June 2, 2015 Share Posted June 2, 2015 So I'm getting all the supplies for my 8.8 swap and i need to get some new 4.10s for my dana 30 cause its geared with 3.08s right now. Whats th best and cheapest ring and pinion and some websites have a lower ratio carrier. whats that? thanks and if i need anything else tell me please. Link to comment Share on other sites More sharing options...
88whitemanche Posted June 2, 2015 Share Posted June 2, 2015 USA standard paid about 220 shipped on eBay with a master install kit Link to comment Share on other sites More sharing options...
shelbyluvv Posted June 2, 2015 Share Posted June 2, 2015 Call either RWK HAUS SUPPLY in California or SBC Offroad in Georgia. They are by far the best deals out there. Link to comment Share on other sites More sharing options...
Jackrabbit41 Posted June 2, 2015 Author Share Posted June 2, 2015 USA standard paid about 220 shipped on eBay with a master install kit So is all I need the ring and pinion and then a master install kit? Link to comment Share on other sites More sharing options...
mnkyboy Posted June 2, 2015 Share Posted June 2, 2015 Rons machining has the carrier for $65,they usually have the gears for cheap too. http://www.ronsmachiningservice.net/carrier-cases/dana/dana-30-bare-open-differential-carrier-case-3-73-up-706008x Or call Robert at RWK haus supply. http://www.rwkhaussupply.com/magento/ Link to comment Share on other sites More sharing options...
Jackrabbit41 Posted June 2, 2015 Author Share Posted June 2, 2015 Thanks Link to comment Share on other sites More sharing options...
Jackrabbit41 Posted June 2, 2015 Author Share Posted June 2, 2015 http://www.ronsmachiningservice.net/carrier-cases/dana/dana-30-bare-open-differential-carrier-case-3-73-up-706008x has4.11 gears for dana 30 but not 4.10s. Its to bad cause they got some cheap prices Link to comment Share on other sites More sharing options...
dunnc1991 Posted June 2, 2015 Share Posted June 2, 2015 USA standard paid about 220 shipped on eBay with a master install kitSo is all I need the ring and pinion and then a master install kit? Are you planning to install the gears yourself? Link to comment Share on other sites More sharing options...
Jeep Driver Posted June 2, 2015 Share Posted June 2, 2015 http://www.ronsmachiningservice.net/carrier-cases/dana/dana-30-bare-open-differential-carrier-case-3-73-up-706008x has4.11 gears for dana 30 but not 4.10s. Its to bad cause they got some cheap prices 4.11s can be used with 4.10s Link to comment Share on other sites More sharing options...
87Warrior Posted June 2, 2015 Share Posted June 2, 2015 4.11 gears for dana 30 but not 4.10s. Its to bad cause they got some cheap prices For all intensive purposes 4.11 is the same as 4.10. Some folks just round differently. Keep in mind, most shops won't provide a warranty if you supply the parts. Link to comment Share on other sites More sharing options...
Jackrabbit41 Posted June 2, 2015 Author Share Posted June 2, 2015 Cool I didn't know that 4.10s and 4.11s work with each case other. And I'm probably doing the swap myself with a mechanic friend so I'm not planning on a warranty Link to comment Share on other sites More sharing options...
Lee21490 Posted June 2, 2015 Share Posted June 2, 2015 Cool I didn't know that 4.10s and 4.11s work with each case other. And I'm probably doing the swap myself with a mechanic friend so I'm not planning on a warranty The 8.8 swap you can do by yourself with a little help, The R&P install... You'll want to take into a shop. There's a axle & driveline shop down the road from my house that does good work for a decent price. Idr the name off the top of my head, But if you're interested i'll look it up. Link to comment Share on other sites More sharing options...
Incommando Posted June 2, 2015 Share Posted June 2, 2015 Cool I didn't know that 4.10s and 4.11s work with each case other. And I'm probably doing the swap myself with a mechanic friend so I'm not planning on a warranty with all due respect not knowing the 4.10/4.11 thing might indicate a need for farming this job out. Link to comment Share on other sites More sharing options...
64 Cheyenne Posted June 2, 2015 Share Posted June 2, 2015 Cool I didn't know that 4.10s and 4.11s work with each case other. And I'm probably doing the swap myself with a mechanic friend so I'm not planning on a warrantywith all due respect not knowing the 4.10/4.11 thing might indicate a need for farming this job out. I agree to some point. But I also heed the advise given by an old friend, "you'll never learn to swim if you don't get your feet wet." What I mean by this is that ring and pinions aren't totally out of the realm of a do it your selfer, if a person gets the tools, does their homework, a ring and pinion is not undoable at home. Granted there are specialty tools needed, no shortcuts allowed' and things can work out just fine. Myself, I'm autodidact, and I did just fine. Four R&P at home, 2 D30s and 2 8.8s, 4.10s and 4.56s respectively. If this is a one time thing, farm it out, or if your like me, a person who likes tools and the knowledge on how things are done, then go the other way and give it a try, just remember, if your not paying a shop and you F it up...it's your $$$$. Link to comment Share on other sites More sharing options...
88whitemanche Posted June 2, 2015 Share Posted June 2, 2015 http://www.ronsmachiningservice.net/carrier-cases/dana/dana-30-bare-open-differential-carrier-case-3-73-up-706008x has4.11 gears for dana 30 but not 4.10s. Its to bad cause they got some cheap pricesThat's where I bought mine...He has his eBay store with free shipping Link to comment Share on other sites More sharing options...
Jackrabbit41 Posted June 2, 2015 Author Share Posted June 2, 2015 I have a mechanic friend that knows how to do all this stuff and I think he's gonna help me do the gears and the welding for the 8.8. If not, then yes I'll take it to a shop to have it done Link to comment Share on other sites More sharing options...
Jackrabbit41 Posted June 3, 2015 Author Share Posted June 3, 2015 If I don't put it in 4wd ever can would 3.08s work with 4.10s in the back? This is probably a stupid question but I'm not sure Link to comment Share on other sites More sharing options...
shelbyluvv Posted June 3, 2015 Share Posted June 3, 2015 Pull the front driveshaft to be safe Link to comment Share on other sites More sharing options...
Lee21490 Posted June 3, 2015 Share Posted June 3, 2015 If I don't put it in 4wd ever can would 3.08s work with 4.10s in the back? This is probably a stupid question but I'm not sure It will be fine if you stay in 2wd, But like shelby said, Pull the driveshaft just in case.. You don't want to deal with repairing it if the shifter gets pushed into 4wd on accident. Also, it might just be cheaper to pick up a d30 with 4.10 gears already in it, And just swap the entire axle. You could also probably find a non cad 4.10 (Not sure what years/etc had 4.10) Link to comment Share on other sites More sharing options...
Jackrabbit41 Posted June 3, 2015 Author Share Posted June 3, 2015 Ya I'll probably just pull the driveshsft and drive around like that for a week or so Link to comment Share on other sites More sharing options...
88whitemanche Posted June 3, 2015 Share Posted June 3, 2015 If I don't put it in 4wd ever can would 3.08s work with 4.10s in the back? This is probably a stupid question but I'm not sure It will be fine if you stay in 2wd, But like shelby said, Pull the driveshaft just in case.. You don't want to deal with repairing it if the shifter gets pushed into 4wd on accident. Also, it might just be cheaper to pick up a d30 with 4.10 gears already in it, And just swap the entire axle. You could also probably find a non cad 4.10 (Not sure what years/etc had 4.10) Stupid rare! I've been looking for 3 years... Sorry to thread hi-jack Link to comment Share on other sites More sharing options...
Nodrama43 Posted June 3, 2015 Share Posted June 3, 2015 I used Yukon Gear 4.11 kits with new Tru Trac LSD front and rear. Link to comment Share on other sites More sharing options...
Jackrabbit41 Posted June 3, 2015 Author Share Posted June 3, 2015 After I get the money, probably not till next Christmas but I'm going to put an air locker in the front or a cable locker Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now