Roll In Liner Question (Subjective Question)

[Dando]

I'm gonna roll in herculiner, I'm taping it off now. Which tape line do you prefer? Trying to decide what looks better and I am leaning more towards the one that goes further down the bed side, what do you think?

 

 

[Incommando]

1st one

[Strokermjcomanche]

I agree with the 1st. However drop it down at the end to follow the lower line as it wraps around the bedside

[Dando]

I'm struggling with this decision because while I agree that normally I would chose the first option but the second option lines up real nice with the lines on the tailgate then too.

 

 

[Strokermjcomanche]

Right thats why I said as it goes around the bedside drop it down then you can continue the Line on the tailgate.

[91Pioneer]

#1, but as you come around the back for the tailgate, drop it down slightly. Or do #1 as you have it and put on a tailgate cap.

[87MJTIM]

I got mine rhinolined.  The shop took it down to the lower crease.  I think it looks good.

 

[Jeep Driver]

I got mine rhinolined.  The shop took it down to the lower crease.  I think it looks good.

 

 

 

Sprayed on? Correct?

 

I would not do the roll-on outside of the bed......rolled bedliner looks like crap in my not so humble opinion.

[87MJTIM]

Yes, it was sprayed on.  I did not do it.

[Jeep Driver]

Yes, it was sprayed on.  I did not do it.

That's probably the route I will go, got sticker shock though at the $500 quote from LineX.

 

Better come with a kiss and a reacharound.

[dscowell]

Start with the first one and see how you like it you can always go farther down if you so wish to do so

[64 Cheyenne]

Still kicking myself in the a** for throwing away those black bed rails I had...not that I'd ever put them on...just sayin.
Don't know if they were aftermarket but I've seen em on a few MJs,

Nostalgic MJ parts I shouldn't have trashed. :wall:

[Dando]

I got mine rhinolined.  The shop took it down to the lower crease.  I think it looks good.

Thanks, I was leaning towards the lower line. Thanks for the picture, I am gonna go to that line.

[Dando]

In case anyone is interested, here is how it turned out today.

 

 

 

 

 

[Hillcountrymac]

How much was the Herculiner? I think it looks good.

[Dando]

The herculiner kit costs around $90. I used some of my oreilys dollars to bring the cost down to around $60. The kit included a gallon of herculiner which turned out to be just around enough for my short bed, you would need more for a long bed.

[92tanMJ]

Glad you went to the seond one :thumbs_up:

[Dando]

After finishing I am very glad I sent further down too. Forgot to post some pics of the tailgate closed to show why I decided to go to the lower body line.

 

 

[ParadiseMJ]

Call me crazy...I didn't want any roll-on OUT side the bed at all. I have diamond plate bed rails and tailgate now.

 

[zackcj7]

What's the trick to getting the masking tape lines strait on the outside of the bed? 

[Dando]

What's the trick to getting the masking tape lines strait on the outside of the bed?

 

I don't want to come off as being cocky but I really took my time and I happen to do a lot of interior/exterior house painting so I've managed to get pretty decent at taping things off.

[HOrnbrod]

Call me crazy...I didn't want any roll-on OUT side the bed at all. I have diamond plate bed rails and tailgate now.

 

 

I won't.  Because that's how I did mine too.  :yes: