Jump to content

jdog

Members
  • Posts

    5094
  • Joined

  • Last visited

  • Days Won

    2

Everything posted by jdog

  1. Have you put a dvom on it and seen what it is doing with the engine running? Have you tested the alt? Just because it's new doesn't mean it's good
  2. Did you do a cluster swap lately? How do you know it's not charging?
  3. jdog

    CC cookbook

    https://kentrollins.com/stuffed-mexican-poblano-peppers/
  4. you can also rig up the cable that goes to it and route it somewhere where you can access and jam
  5. as long as it doesn't slip off and you can figure out a way to keep it engage, there should be no problem, just remember this gets buried under the dash and any issues you will have to go digging
  6. I forget which way, it's been a while since i've had to mess with it. lots of pictures and you have to get to the very bottom of the column.
  7. it needs to be pulled back towards the firewall, i have a write up on how to install the auto column into a manual that eliminates it. you can always just tie it back so that you can turn the ignition to the off position.
  8. jdog

    CC cookbook

    Made this tonight, you are correct
  9. Can we get a full shot of the area of the injectors? A shot of the front of the rail and a shot of the rear of the rail
  10. What did the fluid look like?
  11. If you shift it manually ie 1 to 2 to d does it operate normal?
  12. If you shift it manually ie 1 to 2 to d does it operate normal? If so Suspect tcu under passenger knee bolster is either unplugged or the fuse is missing
  13. After that start checking the spark while running, use a spark tester, you can buy a cheap one that will pass the spark thru able just watch and see when it quits. But do 1-5 first
  14. A member was making them you might reach out to them
  15. jdog

    KOH

    I've been trying to watch when I can, will get caught up sometime next month
  16. You could rig it up with a relay
  17. 92, Apples or bananas
  18. jdog

    Hagerty article

    1869263065_5Jeepsthathavedoubledinvalueinthelast5years-HagertyMedia.pdf
  19. Is there a fuse in the slot that says trans?
  20. The boring channel Matt's off road Fab rats 3dbotmaker (hot wheels racing) Gas station encounters Steve magnante Crash course
  21. But what gauge set does he have was my question. He says his dad has done it but doesn't state what his gauge set is for.
  22. R12 to r134 to r20/400/500 all are different gauges. Also why contaminate what ever they were using the gauge set previously?
  23. You might also check to see what his gauges are, different refrigerants take different gauges
×
×
  • Create New...