jimoshel

A bit harsh there aren't we? Besides. We don't whip our horses here.

They build their engines loose, that is with 1/4 inch clearances between piston and cylinder walls. That way the sand flows right on thru without wearing anything. No need for filters.

SOLD! Let's see the money. :yes:

Them things got two engines in 'em. One to drive the rear wheels and one to drive the turbo.

By larger I am assuming, and we all know what that means, the bearing with the flange. That is the bearing that sets the crank end play.It also requires the block to be machined to accept it. Unless there are marks indicating the bearing was installed with the aide of a BFH then position 5 is where it goes. Look at all the bearing positions on the block. 6 will show the rough casting. One will be shiny and smooth where it was machined.

Almost did the same thing with a '34 chevy I had. Me and my buddy and lil bro had been out chasing and shooting coyotes The Chevy quit. Quick inspection showed no gas to carb. No tools. Over 5 miles back to house. Filled a Pepsi bottle with gas and buddy sat on right hand fender dribbling gas into the carb . Just got to the edge of town when the cops stopped us. After explaining to him what was going on and pointing out only had 2 blocks to get home he said OK. As he was walking back to his car he was chuckling and muttering something ' about dern kids.'

I got a 2wd and a 4wd AW4 out there. Suppose I could go and check. Whats it worth to somebody to find out? :yes:

$1,000, $2,000, $3,000, $4,000, $5,000, $6,000, $6,100, $6,200, $6,300, $6,400, $6,420, $6,430 Can somebody loan me $20, Just till payday? :laughin:

Don't know about the rest of the country but should be pretty close to the same. Here a complete vehicle across the scales will bring $280. Regardleess of weight. Scrap gets $200 a ton. P&P pays $400 for complete vehicles. Must have title.

No way would I trade a good working FI system for a carb. Just saying they were simpler.

CL > pueblo craigslist > all for sale / wanted > cars & trucks - by owner flag [?] : miscategorized prohibited spam best of ads not by this site b68cr-3554550830@sale.craigslist.org [?] email to a friend 1926 Model T Roadster PU - $6500 (SW Kansas) Nice 26 RPU with Ruxtell axle. Engine runs good and has a water pump installed. No rust, tub and bed are extremely straight, fenders have some repairs. Call for details, will not answer texts. Number is six two zero three eight four one eight nine five Location: SW Kansas

Don't walk! RUN! Run away from both of them as fast as you can. You can't stop after just one.

When I went outside around 10;15 last nite I saw a bright glow over the East horizon. Was that you?

I would pay $475 for it. If it were closer.

Gotta love them Grandmas.

Gotta remember the locale. 2 inches in Alabama= 2 feet in Colorado, Montana, etc, etc.

LOL!

YES!! With qualifications.

This is a test. . :MJ 1: .

So how come it showed up in that one but not others?

So how come the :MJ 1: doesn't show up in posts?

Thought...If the engines the same, AMC/Jeep and the trans the same,,,AX15, then why would there be different bell housings? Different clutch release methods?

Thanks Eagle. I've got several trannys and I want to help the lady out but I just don't need another truck if it's going to take big bucks to get it running.