Jump to content

Pete M

Administrators
  • Posts

    40141
  • Joined

  • Last visited

  • Days Won

    114

Everything posted by Pete M

  1. Interesting. Too long? Too short?
  2. go find another. you know you want to.
  3. I would check for decent flow at the pump or at the filter.
  4. now's the time to contemplate a better gear ratio (or finding axles with them) since you have an overdrive.
  5. guys seem to be happy with the Azzy one. gotta ask Azzy to be sure if it's universal for the 2.5 and 4.0, but I think it is.
  6. the handle is the same, the body-side pivot bracket should be the same (someone correct me if I'm wrong there), the links themselves are adjustable and so will likely work, but the trans-side pivot bracket on the AW4 is not the same as the bracket on an AX-5. so you'll want to track one down. but you can skip all this and get the aftermarket t-case shifter instead.
  7. pretty sure everything is expensive these days.
  8. if anyone does, it'll be Novak or AdvanceAdapters.
  9. the factory shop manuals are still available as re-prints.
  10. you may need to @ him. @JWheeler331
  11. is the outer edge of the visor in the same location relative to the truck on both visors?
  12. one more, 'cause he's just too stinkin' cute
  13. couple more of li'l man. who's technically now my godson. I rarely get paid for my efforts when helping people, but apparently I occasionally get a small child in my life as compensation.
  14. does the tip of the long visor go past the halfway point in the middle? that definitely shouldn't happen.
  15. yup, there are 2 different lengths of sunvisors. early vs late years if I remember right.
  16. test for leaks before you get any further.
  17. pretty sure it was Rob that went through two 44a axles under his ZJ (both bearing failures in the diff) and then angrily swapped in a 35 and carried on. I lump them into the same category as the 35. light duty. swap-able for sure, just don't spend a ton of coin on them. the Liberty 8.25s are plentiful and cheap.
  18. the end of the probe needs to be in the middle. looks good to me.
  19. could be wrong, but I believe it's less "locktite" and more "sealant-so-the-hole-doesn't-leak".
  20. that is a... unique lid. I love it!
  21. comradery and knowledge are worth sharing ownership was never a requirement for membership. bummer about the truck though. that sucks.
×
×
  • Create New...