boxyjeep Posted May 6, 2020 Share Posted May 6, 2020 5 hours ago, jeep_pieces said: Orginal Tach works and accurate Used oil pressure sending unit for 96 XJ Used fuel sending unit out of 96 XJ mounted it to 98zj fuel assembly Only guage left it temp sensor, don't know it I want it in motor or in radiator still working on location Wow, that's great. I'm super surprised the one-wire tach signal worked correctly. Link to comment Share on other sites More sharing options...
jeep_pieces Posted May 7, 2020 Author Share Posted May 7, 2020 On 5/6/2020 at 10:59 AM, Chargum85 said: How will you get the gauges to work, specifically the tach? Tach is wired to negative side of coil no longer receives signal from computer Link to comment Share on other sites More sharing options...
jeep_pieces Posted May 20, 2020 Author Share Posted May 20, 2020 Both tanks installed / vent lines / fill neck hooked up/ fuel pumped wired in Link to comment Share on other sites More sharing options...
jeep_pieces Posted June 20, 2020 Author Share Posted June 20, 2020 now 10 inch sub fabbed in. Time to mount 1000watt amp, CB radio, and 12v out lets Link to comment Share on other sites More sharing options...
knever3 Posted June 30, 2020 Share Posted June 30, 2020 THIS i must see.... Can't wait for an audio related post! Link to comment Share on other sites More sharing options...
jeep_pieces Posted August 4, 2020 Author Share Posted August 4, 2020 Link to comment Share on other sites More sharing options...
jeep_pieces Posted August 4, 2020 Author Share Posted August 4, 2020 Getting closer to finishing console Link to comment Share on other sites More sharing options...
Pete M Posted August 4, 2020 Share Posted August 4, 2020 Link to comment Share on other sites More sharing options...
jeep_pieces Posted August 5, 2020 Author Share Posted August 5, 2020 Getting closer to finishing console 5.9L out of 98 jeep grand Cherokee runs good Link to comment Share on other sites More sharing options...
jeep_pieces Posted November 23, 2020 Author Share Posted November 23, 2020 Off to powder coater. Finally done Link to comment Share on other sites More sharing options...
MiNi Beast Posted November 23, 2020 Share Posted November 23, 2020 very nice. Link to comment Share on other sites More sharing options...
Torq_Shep Posted November 23, 2020 Share Posted November 23, 2020 Holy $#!& that is a nice piece. Link to comment Share on other sites More sharing options...
Pete M Posted November 23, 2020 Share Posted November 23, 2020 work of art Link to comment Share on other sites More sharing options...
89 MJ Posted November 23, 2020 Share Posted November 23, 2020 Looks great! Link to comment Share on other sites More sharing options...
kansashogan Posted November 27, 2020 Share Posted November 27, 2020 Holy cow, I bet you have a LOT of time in that console. It looks really cool, nice job. Link to comment Share on other sites More sharing options...
knever3 Posted November 27, 2020 Share Posted November 27, 2020 So the sheet metal console will house a sub? That will sound pretty tinny compared to a typical 3/4" thick wood constructed box. Have you thought about applying sound damping to the interior after powder coat? Maybe some fiber fill as well. Cool idea for the console, just an audiophile couldn't help but chime in.Sent from my SM-G960U1 using Tapatalk Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now