Comanche SS Posted March 25 Author Share Posted March 25 Well, not many updates in terms of the adapters and wheels at the machine shop….So I took on some busy work. Got the front diff stripped down and cleaned, it had legitimiate mud and dirt in there. Luckily, I won't be using any of the old internals, mainly only the housing. The center section is now cleaned out and has a base coat on it just for rust prevention. When the whole front end build is wrapped up everything will get a fresh coat. Link to comment Share on other sites More sharing options...
89 MJ Posted March 25 Share Posted March 25 Did that front diff sit in a swap or something? Link to comment Share on other sites More sharing options...
Comanche SS Posted March 25 Author Share Posted March 25 12 hours ago, 89 MJ said: Did that front diff sit in a swap or something? It must have lol, it was pretty rough for sure. Will be like new before it goes into my MJ Link to comment Share on other sites More sharing options...
Comanche SS Posted March 27 Author Share Posted March 27 More cleaning and prepping front end parts Link to comment Share on other sites More sharing options...
Comanche SS Posted Friday at 02:55 AM Author Share Posted Friday at 02:55 AM It always amazes me how well gas cleans…it’s the ultimate degreaser. That nasty diff section spent 2 minutes in the gas bath, with no scrubbing or cleaning of any sort it looks totally usable (although I won’t be) D264B530-2C90-4F8B-9A3E-48837289C95C.mov Link to comment Share on other sites More sharing options...
Comanche SS Posted Sunday at 01:52 AM Author Share Posted Sunday at 01:52 AM Patiently waiting for the Wheels & Adapters Link to comment Share on other sites More sharing options...
Comanche SS Posted Sunday at 06:49 PM Author Share Posted Sunday at 06:49 PM iPad dash mount Just some 16GA Stainless wrapped in a cloth, couple bends and push fastened to the bezel. Will be good for gauges, maps, and tunes. Link to comment Share on other sites More sharing options...
89 MJ Posted yesterday at 02:32 AM Share Posted yesterday at 02:32 AM Saw this on FaceSpace: I’m excited to see how yours turns out. Link to comment Share on other sites More sharing options...
Comanche SS Posted yesterday at 01:27 PM Author Share Posted yesterday at 01:27 PM 10 hours ago, 89 MJ said: Saw this on FaceSpace: I’m excited to see how yours turns out. Yep, I have been helping Marc out with his questions throughout his build, he found me awhile back before starting his whole build to get insight…It’s going to be a sweet build Link to comment Share on other sites More sharing options...
Comanche SS Posted 18 hours ago Author Share Posted 18 hours ago Well, it looks good, going to be stuck inside for the remainder of the week it sounds like waiting on the parts still. That’s alright, the weather will suck here for the next week anyways so I am not complaining..too much lol. here's a photo in the meantime. Link to comment Share on other sites More sharing options...
.thumb.jpg.809559baf7c47f3daaed1622c0992004.jpg)
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now