Warren99 Posted February 6, 2018 Share Posted February 6, 2018 I went under my Comanche to see what transmission I had, but I couldn't tell. I couldn't find any labels or numbers, the only thing I noticed that might be helpful is the drain plug is on the passenger side. Are there any other ways of identifying which one it is? Link to comment Share on other sites More sharing options...
DirtyComanche Posted February 6, 2018 Share Posted February 6, 2018 The Peugeot case is split down the length of it, with a seam roughly running along the bottom and another at the top. The AX-15 splits around the middle in several sections. Post a couple pictures for 100% verification. If you're going to convert to 4wd there's no need to worry about it, you won't be reusing it. Link to comment Share on other sites More sharing options...
Marine1Texas Posted February 7, 2018 Share Posted February 7, 2018 if it is 87 to half 89 they used ba10/5 and then mid 89 up they used the ax-15. They have 2 different crossmembers What mount you have, right side is ba10/5 - left is ax15 I find that easiest way to see. Link to comment Share on other sites More sharing options...
Kickin’Chicken Posted February 9, 2018 Share Posted February 9, 2018 While looking at a Comanche recently I ran up on this one with the B(ad)A(pple)10. Here's the pic. Link to comment Share on other sites More sharing options...
Marine1Texas Posted February 9, 2018 Share Posted February 9, 2018 The BA10/5 was not a bad tranny. the problem is it was light duty for a 4.0 going off road, just way to much for its design. I have seen them go over 200k. However with offroading you will see them puke the guts out quick. I have a friend in Czech republic has one in a 88 that never off roads, but just street use. he got right around 250k right now and not a single problem. I have 2 BA10/5 in a shed that are pretty much new with less than 10k on both. I keep them around just in case with all the parts. Link to comment Share on other sites More sharing options...
Kickin’Chicken Posted February 9, 2018 Share Posted February 9, 2018 14 minutes ago, Noriyori_Kudo said: The BA10/5 was not a bad tranny. the problem is it was light duty for a 4.0 going off road, just way to much for its design. I have seen them go over 200k. However with offroading you will see them puke the guts out quick. I have a friend in Czech republic has one in a 88 that never off roads, but just street use. he got right around 250k right now and not a single problem. I have 2 BA10/5 in a shed that are pretty much new with less than 10k on both. I keep them around just in case with all the parts. Compared to the ax15, it's junk. Link to comment Share on other sites More sharing options...
87MJTIM Posted February 9, 2018 Share Posted February 9, 2018 As I have said in previous threads, my BA10 never left me stranded. I put over 270k on it. My problem with it was the internal slave cylinder. That was why I swapped in an external slave AX15. Yes, the AX15 is a better trans for Jeeps. Link to comment Share on other sites More sharing options...
Eagle Posted February 9, 2018 Share Posted February 9, 2018 45 minutes ago, Kickin’Chicken said: Compared to the ax15, it's junk. And compared to the 3550 the AX-15 is junk. Once you start that argument, you can't stop. I bought my '88 XJ new. The original BA 10/5 transmission now has over 287,000 miles on it, has been driven offroad extensively, and it still works fine. Link to comment Share on other sites More sharing options...
Marine1Texas Posted February 9, 2018 Share Posted February 9, 2018 44 minutes ago, 87MJTIM said: As I have said in previous threads, my BA10 never left me stranded. I put over 270k on it. My problem with it was the internal slave cylinder. That was why I swapped in an external slave AX15. Yes, the AX15 is a better trans for Jeeps. That was my problem too, that slave would just pop and give out without warning. We had one go out at 4k then at 7k then when out at just under 11k. That's when we switched over to ax15. My buddy in Czech republic says he gets about 45k out of a slave on his ba10. I always wonder if it was parts supplier! I still have the ba10 in shed with new clutch, and new slave. IN a pinch I can switch out in a couple hours if my ax15 ever went wrong Link to comment Share on other sites More sharing options...
87MJTIM Posted February 9, 2018 Share Posted February 9, 2018 In the first 25 years of the truck, it was on its 5th slave cylinder. I said it was not going to see a 6th. Link to comment Share on other sites More sharing options...
Kickin’Chicken Posted February 9, 2018 Share Posted February 9, 2018 39 minutes ago, Eagle said: And compared to the 3550 the AX-15 is junk. That's simply not true. AX15 is as strong or stronger then the 3550. Link to comment Share on other sites More sharing options...
87MJTIM Posted February 9, 2018 Share Posted February 9, 2018 1 hour ago, Kickin’Chicken said: That's simply not true. AX15 is as strong or stronger then the 3550. "Tastes great!" "Less filling!" Link to comment Share on other sites More sharing options...
Pete M Posted February 9, 2018 Share Posted February 9, 2018 my Peugeot never left me stranded either! after it blew a hole out the side of the case and drained itself of fluid I was still able to drive 20 some miles home (although some gears made an ear splitting noise and eventually I was stuck in 3rd for the last few miles). 2wd and I was just cruising along at 45 in rush hour traffic at the time. Link to comment Share on other sites More sharing options...
HOrnbrod Posted February 9, 2018 Share Posted February 9, 2018 1 hour ago, 87MJTIM said: "Tastes great!" "Less filling!" Link to comment Share on other sites More sharing options...
MeanLemons Posted February 9, 2018 Share Posted February 9, 2018 2 hours ago, Kickin’Chicken said: That's simply not true. AX15 is as strong or stronger then the 3550. Ax15 was considered medium duty NV3550 was considered heavy duty. And had slightly lower first gear Link to comment Share on other sites More sharing options...
Eagle Posted February 9, 2018 Share Posted February 9, 2018 4 hours ago, Kickin’Chicken said: That's simply not true. AX15 is as strong or stronger then the 3550. That's highly debatable, but strength is not the only criterion for "better." I own XJs and MJs with all three transmissions, and the 3550 is by far the best of the breed. Stronger, smoother, easier to shift, better gear ratios, and quieter. Link to comment Share on other sites More sharing options...
Warren99 Posted February 9, 2018 Author Share Posted February 9, 2018 What have I created? Link to comment Share on other sites More sharing options...
Pete M Posted February 10, 2018 Share Posted February 10, 2018 5 hours ago, Warren99 said: What have I created? welcome to the internet and also, less filling! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now