ahmincha Posted December 23, 2015 Author Share Posted December 23, 2015 The 4wd trans 242 transfer case Link to comment Share on other sites More sharing options...
ahmincha Posted January 5, 2016 Author Share Posted January 5, 2016 Ok all done for now 4wd is in also the 3" lift is installed Here is picture of cut down drive shaft $90.00 and 24 hour turn around lift kit installed Plow installed Link to comment Share on other sites More sharing options...
ahmincha Posted January 26, 2016 Author Share Posted January 26, 2016 I use this truck to plow my personal driveway and a friends or 2 . I replaced both axle shaft u joints and both axles broke at u joints. I ordered g2 chromealloy axles and installed them so far so good. I guess I did something wrong when I installed thenu joints Link to comment Share on other sites More sharing options...
Dom U Posted February 5, 2016 Share Posted February 5, 2016 Do you have any pics of the truck with the 3" lift before you put the plow on? I'd like to see how much the plow sagged the BDS coil springs. Dosent look as tall as other bds 3" kits iv seen installed, how ever those were on Cherokees. I just ordered a 2" kit for my friends build I'm assisting him with and am now thinking I should of got him the 3". Link to comment Share on other sites More sharing options...
ahmincha Posted February 20, 2016 Author Share Posted February 20, 2016 Sorry for the delay dom Link to comment Share on other sites More sharing options...
ahmincha Posted April 2, 2016 Author Share Posted April 2, 2016 I added a receiver hitch to the front just to move stuff around the yard I welded it to the plow frame Link to comment Share on other sites More sharing options...
ahmincha Posted May 15, 2016 Author Share Posted May 15, 2016 tear down getting ready for paint gas tank removedOld rotted bed removed Link to comment Share on other sites More sharing options...
ahmincha Posted May 15, 2016 Author Share Posted May 15, 2016 Doors removed Link to comment Share on other sites More sharing options...
ahmincha Posted May 15, 2016 Author Share Posted May 15, 2016 Ok a little more done I removed the windshield,Plenty of rust there More removal Link to comment Share on other sites More sharing options...
Strokermjcomanche Posted May 15, 2016 Share Posted May 15, 2016 I have a couple roof sections if you need a patch . I'm in Youngstown . Link to comment Share on other sites More sharing options...
ahmincha Posted May 17, 2016 Author Share Posted May 17, 2016 I may take you up on that stroker, I am in mayfield area Link to comment Share on other sites More sharing options...
ahmincha Posted May 17, 2016 Author Share Posted May 17, 2016 Rear window is out And the reason for removing the interior Link to comment Share on other sites More sharing options...
ahmincha Posted June 7, 2016 Author Share Posted June 7, 2016 Score at pull a part Link to comment Share on other sites More sharing options...
Rymanrph Posted June 30, 2016 Share Posted June 30, 2016 Nice looking truck. I still have the white '92 that we swapped several years ago. Other than blowing through clutch slave cylinders it's running strong! That is a clean looking MJ! Makes me somewhat wish I had kept mine at the lower height and the Ravine wheels. Link to comment Share on other sites More sharing options...
ahmincha Posted July 19, 2016 Author Share Posted July 19, 2016 back from media blaster Link to comment Share on other sites More sharing options...
ahmincha Posted July 19, 2016 Author Share Posted July 19, 2016 Link to comment Share on other sites More sharing options...
Newton Posted July 19, 2016 Share Posted July 19, 2016 Wow this thing is a rust bucket kinda reminds me of mine when i just bought it.. you have your work cut out but i'm sure nothing you can't handle...all the best! Link to comment Share on other sites More sharing options...
ahmincha Posted July 20, 2016 Author Share Posted July 20, 2016 Yeah I knew about the floor and rockers. the roof was news to me and the 1 little hole in the frame. I am happy with the results Link to comment Share on other sites More sharing options...
terrawombat Posted July 20, 2016 Share Posted July 20, 2016 This is why I drove as far as I did to pick up the rust free 92 you had! Still rust free to this day! Link to comment Share on other sites More sharing options...
ahmincha Posted July 20, 2016 Author Share Posted July 20, 2016 Yeah I know Thats why I didn't convert yours to 4wd and keep it. It was to nice Link to comment Share on other sites More sharing options...
DirtyComanche Posted July 20, 2016 Share Posted July 20, 2016 Looks like a good excuse to put rectangular tube rockers in. Link to comment Share on other sites More sharing options...
ahmincha Posted July 21, 2016 Author Share Posted July 21, 2016 frame hole fixed Chassis saver Link to comment Share on other sites More sharing options...
ahmincha Posted July 21, 2016 Author Share Posted July 21, 2016 Getting rocker ready Link to comment Share on other sites More sharing options...
gogmorgo Posted July 22, 2016 Share Posted July 22, 2016 Did you use stamped replacement rockers? If so, which ones and how well did they fit? Link to comment Share on other sites More sharing options...
ahmincha Posted July 22, 2016 Author Share Posted July 22, 2016 Yes made by globe. Fitment sucks I have to sice them and weld back together Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now