JeffK Posted February 14, 2010 Share Posted February 14, 2010 This is copied of part of my build thread. I found out after I posted this that 91MJDude had found these lights as well, he suggested doing a write up so everybody else could find them. I've been obsessing over this B-pillar light. Stock replacements are impossible too find or expensive. I thought using the same Led's woodkrawler (jeep forum member) used... but I really wanted something that would snap into the factory hole. I found these VW lights and the fit the hole fairly well... but I just didn't really like them. I'm not sure exactly what I was looking for, but I was doing a image search on Google and stumbled on this picture... It's an aftermarket replacement interior light that's marketed for Hot Rods and custom cars. Made by a US company called Euramtec. I found their website and downloaded the spec sheet on the lights. You can see from their measurements it's almost identical to the factory MJ lights... After about a half hour of searching, I found a site that sells classic car lenses and they had a listing for them. I got both of them for $35 shipped. Compared to the VW lens... I painted the trim and fitted the new lights... Mods to the trim was minimum. The height of the new light was perfect, and I had to file about a 1/16 of an inch of material to make them fit length wise. Fitted... I really like the way they look installed and as an added bonus the function of the new lights is the same as the factory. UP - on/off with the door Center - off Down - on/map light :cheers: Link to comment Share on other sites More sharing options...
jpnjim Posted February 14, 2010 Share Posted February 14, 2010 Looks good! How is the 'action' on them? Do they feel like the stock switches (OK, but borderline cheesy), or more substantial? Link to comment Share on other sites More sharing options...
HOrnbrod Posted February 14, 2010 Share Posted February 14, 2010 They look kind of like the Porsche lights I used except with a black frame. I like them! High cheese factor on these though: Link to comment Share on other sites More sharing options...
JeffK Posted February 14, 2010 Author Share Posted February 14, 2010 For a plastic (sorry fiberglass reinforced resin) light, they are surprisingly well made the action on the switch is as good as the best factory one I've seen. The back. The switch mechanism. Lens in the up position. Middle. Down. Link to comment Share on other sites More sharing options...
JeffK Posted February 14, 2010 Author Share Posted February 14, 2010 They look kind of like the Porsche lights I used except with a black frame. I like them! High cheese factor on these though: The only Porsche lights I could find on Ebay were like $40 each or beat all to crap. As far as the LEDs...I bought a set and really didn't like them for my MJ. I like what woodkrawler has done to his MJ. He's modernized it with a '99 interior and sheet metal, so they are in line with what he's trying to do. Link to comment Share on other sites More sharing options...
Akula69 Posted February 14, 2010 Share Posted February 14, 2010 Got the same lights at a limo outfitting place: http://www.infiniteinnovations.com/main.asp?p=4_179 They were 8.95 each. Link to comment Share on other sites More sharing options...
HOrnbrod Posted February 14, 2010 Share Posted February 14, 2010 The only Porsche lights I could find on Ebay were like $40 each or beat all to crap. As far as the LEDs...I bought a set and really didn't like them for my MJ. $40/ea! I got three for $20 including shipping. You were looking in all the wrong places mate. :cheers: Link to comment Share on other sites More sharing options...
WahooSteeler Posted February 14, 2010 Share Posted February 14, 2010 looks like you can buy direct from Euramtec, you just have to register for an account. Not sure what the pricing is, haven't signed up yet. Link to comment Share on other sites More sharing options...
socal1200r Posted February 14, 2010 Share Posted February 14, 2010 The only problem I see with those Euramtec lights is they still use those funky old-style bulbs. I replaced the stock b-pillar lights with some universal rectangular interior dome lights, and replaced the stock incandescent bulb with a 3-LED bulb, and boy do those two lights do a good job of illuminating the interior! But you did a GREAT job in finding those Euramtec lights, and painting them to match your panels. Very stock looking, and at first glance (and second and third!), I doubt anyone would know they're not stock MJ lights. Nice find and great writeup! Link to comment Share on other sites More sharing options...
HOrnbrod Posted February 14, 2010 Share Posted February 14, 2010 The only problem I see with those Euramtec lights is they still use those funky old-style bulbs. I replaced the stock b-pillar lights with some universal rectangular interior dome lights, and replaced the stock incandescent bulb with a 3-LED bulb, and boy do those two lights do a good job of illuminating the interior! That's not a problem as these bulbs are readily available with LEDs. Link to comment Share on other sites More sharing options...
glundblad Posted February 15, 2010 Share Posted February 15, 2010 Those look great. I have the same obsession with my b-pillar lights. I may give these a try. I thought I saw that you didnt buy them through Euramtec but I didnt see where you bought them? Do you remember the name of the store? Link to comment Share on other sites More sharing options...
JeffK Posted February 15, 2010 Author Share Posted February 15, 2010 Those look great. I have the same obsession with my b-pillar lights. I may give these a try. I thought I saw that you didnt buy them through Euramtec but I didnt see where you bought them? Do you remember the name of the store? I bought mine from here...http://www.taillightking.com/hot_rod_light_assemblies.htm for $15 each, but from what Akula69 posted you can get the exact same lights here http://www.infiniteinnovations.com/main.asp?p=4_179 for $8.95. Link to comment Share on other sites More sharing options...
WahooSteeler Posted February 15, 2010 Share Posted February 15, 2010 The only problem I see with those Euramtec lights is they still use those funky old-style bulbs. I replaced the stock b-pillar lights with some universal rectangular interior dome lights, and replaced the stock incandescent bulb with a 3-LED bulb, and boy do those two lights do a good job of illuminating the interior! That's not a problem as these bulbs are readily available with LEDs. Hornbrod, got a part # and place to buy those LED bulbs for these lights? Link to comment Share on other sites More sharing options...
HOrnbrod Posted February 15, 2010 Share Posted February 15, 2010 I don't remember the p/n for the tubular bulb, I put LEDs in a couple of years ago. Pop the bulb out and it will be stamped on the bulb. Then do a seach for LED xxxx, and there will be many options. Plug and play w/o the heat. Link to comment Share on other sites More sharing options...
WahooSteeler Posted February 15, 2010 Share Posted February 15, 2010 I don't remember the p/n for the tubular bulb, I put LEDs in a couple of years ago. Pop the bulb out and it will be stamped on the bulb. Then do a seach for LED xxxx, and there will be many options. Plug and play w/o the heat. cool. i've got some spares in the truck now, in the packaging, so i'll run that. thanks! Link to comment Share on other sites More sharing options...
terrawombat Posted February 15, 2010 Share Posted February 15, 2010 Those look great. I have the same obsession with my b-pillar lights. I may give these a try. I thought I saw that you didnt buy them through Euramtec but I didnt see where you bought them? Do you remember the name of the store? I bought mine from here...http://www.taillightking.com/hot_rod_light_assemblies.htm for $15 each, but from what Akula69 posted you can get the exact same lights here http://www.infiniteinnovations.com/main.asp?p=4_179 for $8.95. That second site sticks you with a mandatory $10 handling fee and I wasn't able to find their normal UPS ground shipping rate anywhere. So, assume $6-$8 for that and you're looking at about the same price as your first link. I refuse to buy from places that do a mandatory $10 handling fee...give me a break. Link to comment Share on other sites More sharing options...
91MJdude Posted February 15, 2010 Share Posted February 15, 2010 there is really no need for led's in the euramtec lights, they are very bright to begin with. If you have to install led's in your A pillar lights for them to be bright you have poorly designed lights then, IMHO straight from eurametc they were around $25 shipped. other sources mark them up. $8.00 X 2 + shipping only thing is you have to call them, no online orders. (that i could find) I had a nice lady on the other end. If you call you don't have to register. Part number = Complete Assembly: A-7180-BC They are 10X better than any factory ones, very good construction. not brittle, well designed. I will try to get a shot of them in the dark, they light up the whole interior. unlike other after-market lights these actually look like they are suppose to be there. These are defiantly the best alternative, actually I will say they are better than factory ones. http://www.euramtec.com/catalog/parts.php?section=C1 Contact info for Euramtec 29650 Grand River Avenue Farmington Hills, MI 48336-5622 USA Phone: (248) 473-8660 Fax: (248) 473-8662 E-mail: Contact@euramtec.com I Hope this clears up all the ?s Link to comment Share on other sites More sharing options...
terrawombat Posted February 17, 2010 Share Posted February 17, 2010 Thank you for the info and the pictures. I'm in the process of putting an order through for a pair of the lights. Their registration process and e-mail inquiry "whitelisting" is pretty ridiculous, but I guess it keeps out a lot of spam mail! Link to comment Share on other sites More sharing options...
terrawombat Posted February 23, 2010 Share Posted February 23, 2010 I placed the order for these lights via e-mail last week and just got them in the mail today. Definitely pretty good quality lights and 'switch' feel is solid. Total price came out to be a little under $15 shipped for each light. Thanks again for the info! Link to comment Share on other sites More sharing options...
M1A1TankerTom Posted June 27, 2010 Share Posted June 27, 2010 sorry to bring this back from the dead but I need to tag this...planning on a major interior over haul as my next job and these are on the list of things to do. Link to comment Share on other sites More sharing options...
Rymanrph Posted July 20, 2010 Share Posted July 20, 2010 I called and placed my order today with Euramtec. The lady that usually handles the orders wasn't there today, but the man I spoke to seemed very excited that I found their information on a car forum. They list on Ebay now (cheaper if you just call though): http://cgi.ebay.com/ebaymotors/Universa ... ccessories They're only $8 each and he charged me $6 for shipping, so I got them both for $22 shipped. He said they actually bought the rights from the original French company for these lights and manufacture them now in Michigan. Its nice to be able to buy something built in the USA. Link to comment Share on other sites More sharing options...
terrawombat Posted July 20, 2010 Share Posted July 20, 2010 Glad to see they finally have a way of ordering their products online. Not so happy that they're charging more for their products online, though - perhaps has to do with the e-bay listing fees these days (which are ridiculous), but they could easily setup an online shopping cart on their website. I don't mind calling to order a product, but it's so much easier to do it online and then I'll at least have an electronic record of it. Link to comment Share on other sites More sharing options...
Euramtec Posted July 20, 2010 Share Posted July 20, 2010 2/27/2012 - the light is now available through our ebay store for $16.00. For Comanche club members it is available for $13.00. When you order on ebay do not pay Please send a note through ebay stating you are a Comanche club member and wait for an invoice before paying. Thank you. Maryann Contact@euramtec.com Dear ComancheClub members and friends, Indeed, we had a nice conversation this morning with Ryan and we would like to take this opportunity to introduce ourselves as a potential supplier for the B-Pillar Light. It is available thru eBay at a higher price due to eBay charges, listing fees, store fees, paypal fees, etc., but for the ComancheClub members we have set a price of $8.00 each. When you contact us, please specify that you are a member of the ComancheClub. The light was originally designed in France for a Chrysler car built in France. After the expiration of that vehicle we purchased the tooling and transferred the production of the light to here in the US, and have been supplying the light from here for the last 15 years to many industries (specialty vehicles, street rods, marine, etc.). We hope that this product will be a nice substitution for the original factory piece. Jeep On! Joe Warneke Technical Sales, Euramtec Corp. http://www.euramtec.com :banana: Link to comment Share on other sites More sharing options...
Automan2164 Posted July 20, 2010 Share Posted July 20, 2010 Dear ComancheClub members and friends,Indeed, we had a nice conversation this morning with Ryan and we would like to take this opportunity to introduce ourselves as a potential supplier for the B-Pillar Light. It is available thru eBay at a higher price due to eBay charges, listing fees, store fees, paypal fees, etc., but for the ComancheClub members we have set a price of $8.00 each. When you contact us, please specify that you are a member of the ComancheClub. The light was originally designed in France for a Chrysler car built in France. After the expiration of that vehicle we purchased the tooling and transferred the production of the light to here in the US, and have been supplying the light from here for the last 15 years to many industries (specialty vehicles, street rods, marine, etc.). We hope that this product will be a nice substitution for the original factory piece. Jeep On! Joe Warneke Technical Sales, Euramtec Corp. sales@euramtec.com http://www.euramtec.com :banana: Thanks for thinking about us Joe. Its good to know we can still get the lights, and help out an american company. But, I have a question... Could you look into purchasing the tooling for our tail lights? You could make a decent amount of sales if we had an aftermarket alternative. A short while ago our used tail lights were fetching $350 a set on ebay in good condition. They have dropped in price recently, but imagine the draw for them. That would be awesome if you could look into that. Thanks, Rob L. Link to comment Share on other sites More sharing options...
snowboard3r411 Posted July 20, 2010 Share Posted July 20, 2010 whats the part number and web site you got the black factory looking lights from??? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now