Jump to content

brighter stock lights


Recommended Posts

i know its better to upgrade the stock light harness and get nicer lights but right now i just want a good pair of bright sealed beam lights for my truck so i can tell when I'm driving at night my lights are on my stock lights are very dim and one went out yesterday need new and better ones. any ideas

Link to comment
Share on other sites

In my humble opinion the relays are the best mod, hands down. Shouldn't cost much and should only take an afternoon to do. Plus you'll greatly reduce the amperage trying to flow through those tiny ancient wires and your headlight switch. :thumbsup:

Link to comment
Share on other sites

I have the silverstars in mine,they are a big improvement over stock

 

They are some improvement, been there, but if wired through relays, elimating the voltage drop from the too small AWG OEM wiring, only then they will be a BIG improvement. :cheers:

Link to comment
Share on other sites

I havnt done my lights yet but i did convert my heater fan to a relay,it made a huge difference over how it was before.

 

My brother converted his entire land cruiser to curcuit breakers and relays,it looked kinda cool and worked well.

Link to comment
Share on other sites

This is on my short list!!! Gonna run some Hella Vision Plus lights with it.

 

If you're going to go Hella, I'd highly recommend the E-codes over the Vision Plus lamps. I've had both, and H4 bulb E-codes are much brighter than the Vision Plus. Nice sharp cutoff too so if they are aimed right you won't blind oncoming traffic. :cheers:

 

http://www.rallylights.com/detail.aspx?ID=744

Link to comment
Share on other sites

I've changed my mind already...

 

Now I'm gonna do IPF housings: http://www.4wd.com/productdetails.aspx? ... rtID=11264

 

With IPF X4 bulbs: http://www.4wd.com/productdetails.aspx? ... rtID=14888

 

Or go the cheap route on bulbs and get these IPCW H4 bulbs: http://www.4wd.com/productdetails.aspx? ... rtID=13200

 

The only nice thing is that I get them pretty cheap... :brows:

Link to comment
Share on other sites

i bought rampage lights from quadratracgreat lights $80.00 no need to upgrade harness

 

If you used these Rampage lights to replace existing factory Jeep driving lights, you may be okay because the factory driving lights were wired thru a relay. If you just added them and installed your own wiring & switch, they should definitely be on a relay especially with an H4 bulb.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...