ComancheKid45

Some side by side shots with my XJ, which has gotten some attention over the winter as well :cheers:

Wow I'm amazed.....you made me Jelous of you! Ha Ha Awesome Find!!!

http://c2cfabrication.com/store/index.p ... c6c072cfce These are great to work with....I'm sure they'll work for you as well :thumbsup:

I'm looking for an Alternator upgrade for my MJ, don't need to be going too extreme but maybe something like a 136amp or so. Mainly for running off road lights. I know theres alternators out there off other Jeeps that will fit with minimal modification so idk what someone here might have laying around. Thanks! :thumbsup:

Finally put a period on my Speedometer issues. :clapping:

Took everything apart again and hit all the Speedo internals with some dry lube... Problem Solved :banana: :clapping: Guess it just gets alittle dry in there after 23 years, lol

Alright I'm still chasing this issue.....i had everything apart this weekend and noticed the cable really has no way for lube or contaminates to get inside it, i removed the plastic connector and tryed to get the nozzle down in the cable but noticed that there was a bushing with a hole no larger than the cable itself, the cable spun freely and seemed fine.....However I'm thinking it could be coming from the Speedo itself, even though i put a new cluster in i used the orgional speedo, since its all mechanical I'm sure a spray of WD40 or some type of lube on the speedo gears themselves may be in order. I have the graphite base spray i was going to use on the cable, would that be alright on the speedo gears? or should i lean towards something more triditional? I know the sound is from right behind the dash and the speedo itself is my last culprit. Any other info would be great. Thanks!

Ha Ha....i think we'd crash any party that would be happening there We'd Have MJs parked on top of Mercedies and Lexus's, LMAO it could be awesome!

I think i'd go this route... Yeah i might have 2 look into this as another project sometime as well.....i did a cluster swap but forgot about my PRND321 switch when i pulled the old cluster and you can figure out the rest, lol oops, atleast all i drive are jeeps so I'm used 2 the shift points :yes:

Ive driven with it tonight already and the tach seems to read normal, very close to my XJ so i assume its the same.

Installed a full gauge cluster this evening

Wow its been awhile since ive updated this....anyway i just completed my newest project this evening, Upgrading to some full guages (Thanks Wildman!) They were out of a Canadian XJ so some of the measurements are metric, i think its kinda cool, i did however swap out the Speedo to my orgional to keep my milage and to keep MPH, even with it in there I think it looks pretty good, still need an Oil sender which ill tackle tomorrow. Someday ill take some new pics of the truck as well when i get a chance to keep it clean. :thumbsup:

Rule #2- to even be considered a Jeep there must be 2 solid Axles underneath it, IFS is not found on any real Jeeps i know of :smart:

An XJ AAL will net about 1/2 the height when installed on an MJ....so a 3" XJ AAL will net ya roughly no more than 1.5" on an MJ :thumbsup:

When you out in the Mountains its hard to beat Ted Nugent!

Awesome MJ Have any pics of the engine compartment?

Took off the front Drive shaft and made sure it was greased up real good, than reinstalled. Added some Lucus Products in various places, checked my exhaust header bolts for the heck of it as well as intake bolts. I guess thats about it.....Dash is comin apart this weekend :cheers:

Chrysler decided the Dakota had the brightest future and didnt want competition from the same cooperation.

Sig worthy??? Ha Ha :clapping:

If you have all the wiring and sensors ect. I think itd be worth a shot......i mean what else would ya do with it, lol

Ha Ha....yeah 5" is the minimum ive heard, most net between 5.5"-6" of Lift with an SOA (Spring Over axle) :smart: :typing:

Well essentually you need a 6" lift for the front, its only cheap for lifting the rear.....

this is completly irrelivent but that Eliminator picture reminded me of The 1 that was for sale last summer around here. It was sold to a Canadian Fella for the full asking price of $5500. In a way It would have been cool to see the MJs run into the mid 90s but I'm glad theyre as far and few between as they are....i mean look what happened 2 the Rangers and S-10s...lol

Thats such a sad movie :( ...lol

Yeah I'm working out a deal with another member so these can be left alone for now....I'm keeping my eye on em though :thumbsup: