Jump to content

krustyballer16

Members
 View Profile  See their activity

  • Posts

    2303

  • Joined

  • Last visited

  • Days Won

    6

 Content Type 

Everything posted by krustyballer16

  1. krustyballer16
    So I recently installed Dirtbounds 3 link kit and a ~4" lift (coils, shocks, leafs) I'm now adjusting my lower arms to get wheelbase and caster right. Also the track bar will need adjusted accordingly. While installing the 3 link I didnt undo the track bar or adjust it from where it was set with a worn out 3" lift. But now while adjusting the 3 link arms and with the new lift on, I adjusted the trackbar (need a new one, ran outta threads, its sketchy now) but it still pulls th body to passenger side So now my issue is when i undo the track bar, the body slams to the passenger side and I have to crank the wheel and hold it (with a ratchet strap) to get it back center on the axle. This isnt normal... Does anybody know why it's in a huge bind now? Only thing still attached is the drag link. I think its causing me to have to fight to reinstall the lower arms. And now the upper arm on top of the diff is off. I can't get the axle to rotate down to get a better caster angle. Any ideas? Sent from my SM-G892A using Tapatalk
  2. krustyballer16
    Until the Ball drops, everything is on sale! Hitches are $30 off. (2 week lead time) Seat and rollbar brackets are $10 off. (1 week lead time) Sliders are $20 off. (4-6 week lead time) Sent from my SM-G892A using Tapatalk
  3. krustyballer16
    Where you located? Sent from my SM-G892A using Tapatalk
  4. krustyballer16
    O no, it's on Instagram. They built it for sema this year. Sent from my SM-G892A using Tapatalk
  5. krustyballer16
    Did you see them on the iron jacket MJ? I did and checked em out. I thought about them for my MJ but couldnt find them that cheap. But that was 4 years ago. They look super clean. Sent from my SM-G892A using Tapatalk
  6. krustyballer16
    If they had batteries and charger for it cheap too I'd be all over it. Their stuff is expensive. I have Hitachi and porter cable tools. Nothing dewalt cuz I think anymore you're paying for the name Sent from my SM-G892A using Tapatalk
  7. krustyballer16
    Me! Sent from my SM-G892A using Tapatalk
  8. krustyballer16
    I'd say that@MeanLemons likes his sliders! Lol. Sent from my SM-G892A using Tapatalk
  9. krustyballer16
    Starting to finalize drawings! Had 40 pages to go thru and check! Made into 4 packets...lwb and swb in 10 gauge and 3/16". The laid out pic is a swb kit. 15 pieces per kit! Few more weeks! Sent from my SM-G892A using Tapatalk
  10. krustyballer16
    Theres pics a few posts up of the armor. My rear bumpers are also pictured in here they're just 2x4 tubing. A reciever can be added. But it will be a few months before I can build one I'm out of brackets for them I do make seat brackets. $95 shipped for both sides Sent from my SM-G892A using Tapatalk
  11. krustyballer16
    Not sure what you mean. My armor covers the whole bed side. Unless you're talking about at the bottom between cab and wheel arch. I don't make that piece. Sent from my SM-G892A using Tapatalk
  12. krustyballer16
    I don't make the factory style bumpers anymore. I do still make hitches though. Sent from my SM-G892A using Tapatalk
  13. krustyballer16
    I'll be in York, PA next June or July for the jeep show. Could save on shipping if you wait... Sent from my SM-G892A using Tapatalk
  14. krustyballer16
    I've already got 2 people picked but I'll try to hurry for you lol Sent from my SM-G892A using Tapatalk
  15. krustyballer16
    Not really the place....but I bet its metric! Sent from my SM-G892A using Tapatalk
  16. krustyballer16
    don't go with t&m. They're nothing but problems.... I'm trying to make mine the best fitting set out there. I'm hoping to have them for sale by February. I've gotta test fit them then I'll send a lwb and swb set to people to actually weld on and test. Sent from my SM-G892A using Tapatalk
  17. krustyballer16
    No price yet. can't make any promises but shooting for $500 shipped. Theyll be in 10 gauge or 3/16" price will vary. They will include COMPLETE front to rear including front crossmember and inside frame rail front sections that include the steering box spacer. Sent from my SM-G892A using Tapatalk
  18. krustyballer16
    ?? Sent from my SM-G892A using Tapatalk Not done yet, not sure on price.
  19. krustyballer16
    If you don't end up buying my set, be careful who you buy from. Other sets are junk... Sent from my SM-G892A using Tapatalk
  20. krustyballer16
    Yes, theyll br available soon. Gotta test fit the prototypes and send them out for another test fit with customers then theyll be for sale hopefully by January or so... Sent from my SM-G892A using Tapatalk
  21. krustyballer16
    Dirtbound 3 link built and installed! We made some design improvements to make them easier for production and for another reason [emoji6] We designed some new products too. We didnt have time to get them all installed but should here in a few weeks! Max is an awesome guy! Sent from my SM-G892A using Tapatalk
  22. krustyballer16
    I've got 3 to choose from... look at my for sale thread and post in there. Shipping will be at least $150 I know.... Sent from my SM-G892A using Tapatalk
  23. krustyballer16
    Last nights mini project up here... starting the 3 link. Gonna tear the XJ down tonight and really start on it. Max and I have been talking alot about his business and how everything works and "behind the scenes" of it all. It takes a lot to keep up with demand when you're such a small shop but you're in the top 3 manufacturers of good looking, quality MJ/XJ parts! Sent from my SM-G892A using Tapatalk
  24. krustyballer16
    I've got a headliner but shipping will be outrageous... I've got tons of other parts it you havent seen my post in the for sale section... Sent from my SM-G892A using Tapatalk
  25. krustyballer16
    Ya. That's what I plan on doing, a thicker backer to cover more area behind there. I don't remember If i made my own this first time or not. Didnt work either way... Sent from my SM-G892A using Tapatalk
×
×
  • Create New...