fiatslug87

Maybe not really tech, more of advise. Check your load sensing valve after you get new tires installed. I know mine was oriented correctly when I changed the dif fluid a year ago, then I took a pic for another thread and saw it was AFU. I put two and two together, I had new tires installed a month ago and they lifted the truck by the frame, must have extended the rod and when they lowered it the valve moved to this position.

I did not say that. The Draw-Tite fits both since it bolts to the side of the frame where the bumper brackets attach as does a model made by Valley Industries. The Hidden Hitch attaches under the frame and may be bed length specific according to the manufacturer, I have not tried it on my SWB.

That hitch will fit the long bed MJ. I have the exact model on my '89 LWB whereas my '88 and '90 SWB have the Draw-Tite hitch. It mounts differently than the Draw-Tite, below the frame rather than on the side. It does not bolt to the stock bumper as the Draw-Tite, sits a little further back and if I remember correctly one of the holes was slightly off so I expanded it a bit. I personally like the Draw-Tite better and have a spare to replace the Hidden Hitch at some point. Hey, I just noticed my load sensing valve is messed up!!! Good thing I went to take a picture.

I ordered from them two weeks ago and saw that on my receipt, thought it was specific to the vehicle I was ordering parts for. Nice.

Does this help? http://comancheclub.com/topic/15463-rearview-mirror-and-interior-lighting-upgrade/page__hl__mirror

Funny, I just replaced the CPS in the'89 on Saturday, I was being extremely carefully but dropped the top bolt into the bellhousing. Same as you Don, magnetic pick up tool didn't work but when I unbolted the inspection plate I found the bolt at the bottom of the housing, very happy. My grommet is also missing, thanks for the availabiliy info.

Roll Tide!

Sorry to cut your baseball watching season short Don ;) Maybe next year Pete.

Free tacos thanks Pagan!!

WTF?!! Sandoval 3 up 3 HRs!! Way to go Giants.

Cool, Marco Scutaro MVP! Former A's, I remember being at the A's, Yankees game in '07, bottom of the 9th, 2 runs down, 2 outs, 2 on, Marco facing Rivera I think with a full count hits a walk- off home run! That's how it's done against their ace closer!

Humm Baby! Yeah, I'm old.

Is there any room behind the bushing? The puller I had for my pilot bearing was too large and HKB3 on here suggested wetting toilet paper, filling the hole and hammering it in and repeating. The bearing did come out, I was very surprised.

Saw this on this week's episode Going Native S16/E11. What do you think? Image Not Found

Where is the laserdisc tag? I usually use the mobile site.

Hey Rob thanks for all these, can aa the videos be combined into a sticky so we don't lose them?

After seeing Rob's laserdisc conversion I was reminded that when I purchased my '90 (new) a video came with it. I still have the tape and sleeve but I recorded over it 15 years ago. Does anyone have a copy to convert or that I can convert?

Ferrari California, 10/18/12 Healdsburg, CA.

Trans back-up switch

Ferrari 348, Livermore CA 10/13/12.

No, they're only $70 , still too much in my opinion. Search their site for part number MJ4WIPE.

Teamcherokee sells them, kind of pricey though.

Search ebay for 72-1002 metra, $4.50 shipped.

Welcome to CC. How long have you had your MJ?