500 MJ

I don't have pictures of my cargo light in action, but it does a good enough job at lighting things up for me that I am very happy I have it.

Is the Idle Air Control Valve OK?

Well, actually I just edited this post. However, I went over to edit the other posts in the classifieds and the DIY section and the "edit" button still doesn't show up...?

I've got a few posts that I've made that I would like to edit to update my picture links and items that have sold, etc. In the past it has been a simple click of the "edit" button on the bottom of the original post, that has now disappeared. What happened to it? Can I edit these posts anymore or do I need to make new ones?

I don't know of anyone else that makes them. Have you scrounged around at all of the junkyards yet? Some people have made other small pickup (S-10 & Ranger) bumpers work in a pinch.

Yah, I've got some templates. I'm about to be laid up for quite a bit of time here in January. I can take the time then to draw them up in CAD and make them available online in .pdf for everyone. Look for them sometime mid-January. I figure that will be the best way to share them. I see all of you guys out there that are looking for bumpers, and I haven't given up on making them again. Right now, I'm still in that between zone, don't have a welder yet, don't have a place to make them yet, etc... I'm hoping that someday I can do this again... Right now, I'm spending time fixing a ZJ and getting ready for my wedding in June.

Very Cool...

Sounds good, they can definitely ship them way cheaper than I can, go for it!

I've got some blower motors already pulled from the case, wouldn't be able to ship them until after Christmas though - $30 shipped?

Going to the ZJ discs finally?

Thanks for that link Don, nice document to have handy. I guess I'll just test them on the truck, seems to be the only way. Looks like I'd need the super duper tester otherwise...

Does anyone have any details on how to test an IAC valve? I've looked in my '89 FSM and can find nothing. I've got a bunch of them sitting in a box and I want to know which ones are good/bad for obvious reasons, I've also acquired a '94 ZJ with the 4.0L and would like to test the one it has as well, however it is slightly different than all of the Renix MJ ones I have, 4 pin plug looks to be the same though... Plan on cleaning the TB this weekend to see if that helps clean up the rough idle, probably needs other tune up parts replaced too. I've got a 12V battery in the shop to use to test it, I just need to know which pins to put voltage to...

Good for one here!

Found on Craigslist, wish I were closer... Ad says its a '91, but I know a 4.0L Renix setup when I see it... has to be an '87-'90 I really wish I had a tow dolly at times like these... http://cedarrapids.craigslist.org/cto/2107675653.html

I'm assuming you are looking for a 4.0L. I've got one up here in Madison, WI. You come and get it and its yours. It was given to me for free. Bare block, I stripped everything off of it and stuck it in a garbage bag on the front porch. Couldn't see any reason to scrap it (that was the initial plan when I got it). Perfect block for a rebuild job.

Good Luck Pat, this seems to be more of your niche!

Brandon, You're so lucky. I wish mine had that 2010 stuff on there, what a great deal. Congrats & welcome to the club. I got mine in 2000, I hope to someday get heavily involved with Scouting again, I would love to be a Scoutmaster if everything works out that way. Some of my favorite memories from scouting are the Atikokan Northern Tier canoe trip with all my friends and the Philmont hiking trip with my Dad. Atikokan Philmont, Dad and I are on the upper left. Congrats Again, - Brent

I just bought some stuff, $50 worth, thought it would be useful to others to pass on the 5% discount code I used. Its good 'til Jan 30. You put it in the "How did you hear about us?" box at the bottom of the shopping cart page. Saves you 5% off the final bill, anyone can use it however many times they want to. 44337293036779 - Brent

I've got 3 good ones cleaned up in my box of sensors, I'll pass :)

X2 - You also know where to come to get your questions answered, its what we do best here. Have FUN!

Got your check yesterday. Sending the tested & checked ignition control module out in tomorrow's mail. Thanks - Brent

Sent you a PM.

Are you in town or out of town in the country? With all the crap I'm bound to have laying around at my future place, I'm thinking I've gotta be out of town and in the woods somewhere...

Is this what you are talking about? The ignition control module? http://www.rockauto.com/catalog/x,carco ... ttype,7060 I've been there, done that on my '90. I was having issues starting mine and I could not figure it out, finally replaced this and things have been great since. If I'm going to ship one of my spares off, I'm not looking to get it back. It's either mine or yours. Let me know if you are interested. $15 shipped. I'll test it and verify that its good before I shoot it out to you. It'll be in the mail the day I get payment. - Brent Brent Marsh 1986 Wendt Road Fitchburg, WI 53575 414-750-6433

You can make any light work if you want to... I want an MJ one on my MJ though.