eaglescout526

Depends on which browser you are using. Old edge and IE would correct my spelling. New edge does not correct my spelling but instead lets me know a word is wrong. So Pete it probably isn't the website for autocorrect.

I have the odd experience of the engine being bogged down by the compressor but that’s it. I would check your wiring and the compressor relay and see if it’s going bad.

Was it tested for proper AC output? As cruiser always says, the aftermarket CPS's aren't made to spec in terms of their output. If it tests good then yeah sounds like some wire tracing will have to happen from the ICM into the loom.

Lucky duck.

Did you test the CPS? That would be my go to for no spark as that tells the coil when to spark.

Thats...thats a much better idea.

Welcome to owning a 2.5L. That little engine will take you anywhere and not care. Wonder what gearing you have out back though if you say she is slow. Otherwise she sounds healthy.

Dually noted Pete! As I said in the vid I don't normally do these types of things but with the interest there is I will probably get something like that to just have.

I was able to use the factory brackets when I installed my FEY bumper.

You should register it and see what all shes got and if shes a real Cheif. Wait, is this one already registered?

Ok, ive been told by two that this link works. Do let me know if theres any issues with viewing it. https://1drv.ms/v/s!AiQ3QjzZaCUzkRWPbhdAYU_LbMx3 Enjoy the small order.

What’s bad is that list is somewhere in the FSM if I remember correctly.

Nice!! Glad to see this one being saved!

Let me know what you get. I will look into this. The lamps are pretty much almost derusted now. They will go through another round of vinegar bathing.

You are correct. I would definitely take a look at the brake switch when you can like saveevryjp said

Welcome!

Manche I found you're thread for ya.

Well I made a video of a small unboxing of NOS parts I got in today. Wellll.... I got it under the 39MB limit and CC isnt showing picture, just sound so ill have to take it to youtube for yall to see. In the mean time here is a teaser and if yall want me to do future NOS unboxing videos, let me know. It killed me to wait allll day to not open the box but it was worth it indeed!

*ZZ TRIM STYLE ZZ - PLASTIC BUCKET SEAT -ZZ ADB PROTECTION GROUP PACKAGE AGR SXT Appearance Group AJY Popular Equipment Package BAC 75 AMP ALTERNATOR BCQ Battery - 750 Amp Maintenance Free CGX Head Restraints-Outboard Seating, RR CKA CARPETS - CLASS I SHORT PILE 8 - 12 OZ DDQ Transmission - 5-Speed Manual EFB ENGINE - 2.8L GM 6CYL GAC ALL WINDOWS - TINTED GLASS GEC Window - Left Side, Front, Sliding GFD SLIDING RR WINDOW GSC MIRROR - RIGHT BLACK HAA AIR CONDITIONING - FRONT HCC HEATER W/UPR LEVEL VENTIL - TYPE II JHA WINDSHIELD WIPERS - DELUXE JJA CIGAR LIGHTER - FRT COMP LMA HALOGEN HEADLAMPS LNJ DUAL ROAD LAMPS MBJ Bumper - Front, Black MCA FRONT BUMPER GUARDS MCB REAR BUMPER GUARDS MD8 Delete Front License Plate Bracket MWB SPORT BAR NAA ESA W/CATALYST (EXC CALIF SYSTEM) NHM AUTO SPEED CONTROL NMB ENGINE COOLING - STANDARD DUTY RAC RADIO - AM/MTR SBA POWER STEERING SCE STRG WHL - EURO/SPORT TYPE SUA TILT STEERING COLUMN WJM Wheels - 15 x 7.0 Chrome Build date 5/7/86 Body code JM62

Will it open from the outside?

Seeing the red plate makes me want to put an old AZ plate on mine. I might do that with chunk with my grandparents old red plate.

No problem.

They all route to the back of the AC control deck.

One line goes to the heater valve and the other line runs to the vac reservoir behind the front bumper on the passenger side. I believe the gray/purple one goes to the vac cannister and the black should go to the heater valve. Youll have to see if your vac lines are still present and haven't been dry rotted out.

Yeah id definitely take it back and see if they fudged up something. If you don't mind me askin, what did the shop do to your truck before this problem occurred?