Swampy

If you close your eyes and use your imagination this is basically my comanche

To revive an old thread. Are there any people running seats that didn't come from the factory. No mj/xj/wj/zj buckets. Does anyone have a "racing seat"? PRP, corebu, mastercraft, or any generic ones

Comanche center to center is 42" inches. Doesn't matter if its spring over or spring unders its 42"

What are you asking? If they are the same distance c-c apart?

As I told you before.... Niceeee

I have the mj front skid, I might order a tcase one, my main concern was the transmission protection.

Well is there any skid plate options

Does anyone know if there are any flat belly/full body skids for xj's that can be modified for our mjs. Or would it have to be custom?

From my research Revolution gear, USA Standard Gear, Yukon and Motive all make 5.13s for the dana 30. Also the pinion is the same as the one in a 4.88 gear set. the only thing that is different between the 2 is the ring gear. I have been doing plenty of reading and it seems like most of the people going with this gear set are 4cly jeep owners and they say its holding up fine. Id rather it not break but also want to test a product and put more information out there to better info other owners whether good or bad

I know. I like the stock flare look too but I want wanted to protect the body a bit. just keep going back and forth on whether or not to run the flares

Awesome just ordered a new carrier off of ebay. now to save money for the locker and gear install

Running 35/36s on a 4cly 5spd. The gears are from revolution gear and axle. the good thing is, the pinion is the same as a 4.88 the ring gear is what changes. I also plan on adding some bumpers and body armor so added weight

I'll volunteer my 88 swb if you are still taking applications lol

This may seem like a dumb question but it has to be asked. I am going to regear my jeep eventually from 3.55s to 5.13s. I know I need a new carrier for my d30 axle, the 3.73 carrier. My question is do the spider gears from the 3.55 carrier fit in the 3.73 carrier? I was going to put an aussie locker in it too. Should I just wait till I have the money for the locker and not even worry about the spider gears?

Really? I want the Dirt Bound offroad fender armor but I keep going back and forth between flares and no flares

good deal man!

I was thinking more like the steel fender armor flat flares

Thanks man, still thinking about if to run flares or not

My hunk of junk 4.5" xj lift coils w/ 1.5 metal coil spacers ( I am thinking about 4.5 lift zj coils to lose the spacers) SOA in the rear 8.25 axle with 2wd leaves (may do an add-a-leaf in the rear, my leafs are sitting pretty flat right now) Adjustable upper and lower control arms This is on the above setup on 31x10.5x15 on 15x8 The above suspension setup on 36x12.5x15 super swamper tsl's

That is true lol

Awesome, thanks for the feature! I died when I read the title More is instore for this truck

still have seat brackets available?

And it shows the fit and finish is beautiful. That is creative way to fix the rusty floor pans, do the 97+ dash swap, and swap the 97+ front clip swap all in one

I have thought about those Mercedes 300td diesel sedan engine. Good to see someone making a move with one

Good luck man. Wish you the best! And I will state again... your truck is dream goals