89eliminator

Brent's MJ is on my top 3 favorite MJ list. i have seen it in person, and it is VERY nice. i wouldnt mind seeing it everyday in my garage.

got my disc brake swap almost done. it figures that i never checked out the wheel stud length, and with the swap to discs, i lost some threads so i have to switch out to longer studs. luckily i robbed a bunch last time out at the junkyard that will do the trick. but now i gotta rip everything back apart.

:D calendar looks GREAT!

they open and close using the outside door handle.

nope. he has a weird accent.

pm sent

x2

i run it for one reason and one reason only, so i could fit the solenoid box for my winch in place of the air box. otherwise, i would just be running a stock air box with K&N drop in.

I'm not sending anything hahaha. first come first get.

Libby

well since I'm in it, i kind of have to buy one.

any of you guys want my D44 drum brake stuff. shoes are junk, drums are decent as is all the hardware. free to a good home.

one wade to another, it sounds like B is your best bet. i was in a similar boat a while back and i had to unload my other MJ and my ATV. you gotta do what you gotta do.

the green plate club is the BEST!

nice, Fram oil filters for $2.30.

i don't have a lot of extra stuff laying around, but i wouldnt mind donating something to the cause. post up anything you guys may need.

i dislike those. they seem like they could hang up on stuff too easy and rip off.

it does the same for me on FF. it only happens when i am logged out and then log in. if i stayed logged in it doesnt happen.

thats your typical radius arm design, aka y-link. they work better than short arms, but to me are the poorest performing type of long arms. i made my own 4 link. use MINIMUM of 2", 1/4" wall DOM tube for the lowers. also get some good flex joints, i used Johnny Joints. build it right, and it will be safer than stock. also, the mounting is KEY on unibodies. you can't just weld mounts to the frame. i plated the inside and outside of the frame first.

I'm surprised the brakes still work. i guess the line wasnt cut good enough.

loving the 10.5s

we will find out haha

you should get this done before WF and wheel it :thumbsup:

just in front of the shackle mount. i drilled and tapped the frame.

my (unknown year) MJ44 does not have inner seals.