Jump to content

Comanche SS

Members
 View Profile  See their activity

  • Posts

    712

  • Joined

  • Last visited

 Content Type 

Everything posted by Comanche SS

  1. Comanche SS
    Looking good! What’s left before the trip and when does it start?
  2. Comanche SS
    Worked for me now, maybe it was down for a bit when I checked initially. Not a $6500 truck.
  3. Comanche SS
    Shows unavailable already unfortunately
  4. Comanche SS
    It’s pushed in, the bracket should only be bent to 90* and yours looks much further than that
  5. Comanche SS
    Yes and yes lol, it’ll need a cage after the 4x4 is done, but I’ll definitely be enjoying it in the meantime now that it runs well
  6. Comanche SS
    Amazing what 4 years has done to this jeep. Stock drivetrain, in a small 2 car garage….To Long travel, LS3, Beams, Full float 9’’ rear in a custom workshop. Hoping the next 4 years are just as strong.
  7. Comanche SS
    Well, it looks good, going to be stuck inside for the remainder of the week it sounds like waiting on the parts still. That’s alright, the weather will suck here for the next week anyways so I am not complaining..too much lol. here's a photo in the meantime.
  8. Comanche SS
    They are tough ones for sure, weld a nut to it. I have Spares if you want to replace with OEM style instead of Hex head.
  9. Comanche SS
    The end is near!
  10. Comanche SS
    Yep, I have been helping Marc out with his questions throughout his build, he found me awhile back before starting his whole build to get insight…It’s going to be a sweet build
  11. Comanche SS
    Drop a photo when you get one!
  12. Comanche SS
    I always thought it was panel bond…similar to what they used on the firewall, floor, inner fenders braces etc. I could be vastly wrong though.
  13. Comanche SS
    iPad dash mount Just some 16GA Stainless wrapped in a cloth, couple bends and push fastened to the bezel. Will be good for gauges, maps, and tunes.
  14. Comanche SS
    @pizzaman09Makes me impatient to have my MJ make guest appearances at the autoX! Looks like a lot of fun. @TurboedMJ You’ve gotta get one, They are great little cars with tons of power. Simple and cheap to work on thus far.
  15. Comanche SS
    Have heard of others hiring private investigators, apparently they have some tools and expertise regular civilians don’t…
  16. Comanche SS
    Patiently waiting for the Wheels & Adapters
  17. Comanche SS
    There are many of us who have done the LS route. Myself being one. “Comanche Fun-Runner” Although my build is a bit more extreme than what you mentioned, these builds will be more up your alley: Search these users in the epic forum: @Limeyjeeper - “Comanche Dawn” @ghetdjc320 - “Project Tomahawk” and @70barracuda - “Driving on the street to street truck” Are all great builds to reference also. Some of the most documented LS or LS/AX15 builds on the site.
  18. Comanche SS
    You can HO swap it, or 97+ swap it. But truthfully, the renix is pretty easy to diagnose, without any special tools, if you can work a voltmeter, and know what you are looking for. The HO & 97+ swaps are also good options, but a lot of work, and both have pitfalls of there own.
  19. Comanche SS
    It always amazes me how well gas cleans…it’s the ultimate degreaser. That nasty diff section spent 2 minutes in the gas bath, with no scrubbing or cleaning of any sort it looks totally usable (although I won’t be) D264B530-2C90-4F8B-9A3E-48837289C95C.mov
  20. Comanche SS
    More cleaning and prepping front end parts
  21. Comanche SS
    I ran 33s with 3.07s 4.0/AX15 truck for years and it was doable. With 4.10’s already….no brainer if you can fit them.
  22. Comanche SS
    It must have lol, it was pretty rough for sure. Will be like new before it goes into my MJ
  23. Comanche SS
    Well, not many updates in terms of the adapters and wheels at the machine shop….So I took on some busy work. Got the front diff stripped down and cleaned, it had legitimiate mud and dirt in there. Luckily, I won't be using any of the old internals, mainly only the housing. The center section is now cleaned out and has a base coat on it just for rust prevention. When the whole front end build is wrapped up everything will get a fresh coat.
  24. Comanche SS
    I’m pretty much at a standstill while waiting on the wheels & adapters. brakes are bled, can’t do diff sealant without the hubs. Shocks installed. had to let it run for a few minutes since it’s been sitting for awhile, let some fire thru the pipes 🤣 IMG_0221.mov
  25. Comanche SS
    They tucked it up pretty nice near the trans, I’m impressed. Excited for your truck to come to life, I May have to stop by!
×
×
  • Create New...