Automan2164

As the title states. They don't make them anymore, and I really wanted a set. Rob L.

'92 and '91 should be the same. Rob L.

Well, I know this is supposed to be other toys, but since the MJ/Jeep thing is pretty much what sucks all my cash, I just reached into my FB photos and pulled up some pics of stuff that I tinker with and buy. Enjoy my randomness. Rob L. :cheers:

Believe so. I just can't express my discontent enough for the dislike of the appearance of the FusionBB. Rob L. :ack:

I'd be interested in a roll pan, but would have to see one. You have an email you can send pics to me with? I'll post them for you... Rob L.

I got it Don, but it still irks me. Rob L. :fs2:

You use the part searcher? I just looked in the STL MO areas and found on in IL down there. Someone had a header panel for $40 off an '89 XJ. Rob L.

Try searching here, I found one in your area, for $40. http://car-part.com/ Rob L.

Might just want to find one down by you then... I think shipping would negate the cost of it. I bet shipping alone would be $75ish. Rob L.

Not really. One question though... Would you be looking for shipping, or would you make the trek up here to 60033? Rob L.

Pete, just out of curiosity here, how much is something like vBulletin? You've always said a bunch, but I was just curious if it was something I could swing. After playing with the FusionBB, there really aren't many sites running it, and I think it looks very cheap and unfinished. I like our current setup WAAAAAYYYYY better. Rob L.

The rear axle is actually a bit inboard from stock, so putting in a wider axle would just be fixing a problem. Rob L.

You southerners really grind my gear complaining about your "rust". Until it looks like this gem I picked up over the last summer, I don't want to hear a peep. I will hunt you down and rub salt/calcium chloride into your rockers, floors, and wheel wells until you scream for mercy. Rob L. :fs2:

Sounds horrible. Rob L.

We don't have that many members to warrant that many subforums. I wouldn't want to enter and exit 50 different subforums. :ack: I like it the way things are now, but as the rules state, it helps if you post the state/location in the title. That, and fill out your locations in yer' durn profiles. Rob L.

Ah. Good choice. Rob L.

Said it once, say it again. If you want to get rid of it that bad, let me know. I'll always house another MJ in need. Rob L.

You do know we have a youtube button correct? Rob L.

Anything Jeep. Posters, ads, flags, emblems... You name it. The hard part will be keeping shipping, or a drive in the cheap. Its rather big to ship, and I am kinda on the verge of being too far for you I believe. I am up in Harvard, IL, by the Wisconsin border. Rob L.

As for price, I've had it horse traded to me, I horse traded it away, and then it got horse traded back to me. Sooo... Anything you want to trade and keep the flow going? Rob L. :D

I have one, turn signal to turn signal. Red and all chrome. Interested? Rob L.

COMANCHE OF THE MONTH BUMP!!!!! viewtopic.php?f=3&t=28855 Rob L. :cheers:

This month happens to be one of our most meticulous members, and one of the best guides for how-to's. Enjoy! ---------MARCH 2011---ANOTHERJEFF's 1988 PIONEER----------- MODEL AND YEAR 1988 Jeep Comanche Pioneer. SWB 4X4 ENGINE & PERFORMANCE: Stock '88 4.0. New Gaskets and Detailed. Late model valve cover. Ford (Bosch) yellow 19# injectors. Rustys Air tube with AEM filter. DRIVETRAIN: '99 Dana 30 front diff., with Superior Axle tube seals and diff cover. '99.5 8.25 rear diff., with Riddler dif cover. Both geared 3.55 (3.07 stock) COOLING: Open conversion. 2 Row '00 XJ radiator. Fail-Safe 195* T'stat. New water pump. Napa "98 ZJ fan clutch. '00 OE electric fan. ELECTRICAL & IGNITION: '90 XJ Fuse box and '97 ZJ PDC. Duralast Gold 96 month battery. 100amp alternator. Homemade battery cables with 1/0 welding cable with military spec ends. Etc. STEERING: '98 ZJ V8 steering box with stock pitman arm. '96 ZJ V8 tie rods. ORV damper. Summit power steering cooler. SUSPENSION: Rear-Hellcreek 4.5 SUA leaf springs. Bilstein 5125 shocks. Poly shackle bushings and bump-stops. Front-RE 3.5 springs. Re upper and lower control arms. Bilstein 5150 shocks. JKS bar-pin and stud eliminators. 1 1/8" sway bar with greasable bushings and homemade discos. Procomp adjustable trac bar. Poly bump-stops and 1" spring spacers. INTERIOR: Black and gray scheme borrowed from '90 XJ limited. New carpet, and headliner. Tilt wheel. Full gauge cluster. Power windows w/dash mounted switches. Wrangler steering wheel. Recovered 92 bench. XJ mini console with 12v and USB outlet. Blaupunkt head unit, Alpine amp and Infinity speakers. LED dash lights. Etc. BRAKES: '96 XJ booster and MC. '97 ZJ disc prop. valve. '96 Xj front brake assemblies with ceramic pads. '06 KJ rear discs with ceramic pads. Stainless brake lines. LIGHTING: HID headlight conversion with harness. Detours light bar with 2 6" Hellas and 2 5" Westin lights. Export front signals. WHEELS/TIRES: Black Soft 8s with Nitto Terra Grappler 265/75R16 MISCELLANEOUS: Dakota light bar with w/ 6" Procomp lights. Front skid. Best MJ story I searched for months to find a usable headliner backer and finally found one at a nearby yard. I had the all the necessary trim removed except for the last bolt in the grab bar and I broke my torx bit. I wasn't about to leave the headliner so I pulled up hard on the grab bar and it snapped off. Sweet. Kinda. When it snapped it left a sharp piece of plastic which sliced my left hand deep. I finished up one handed, but bleed all over myself and my tools. I guess the guy at the desk felt bad for me all bloodied up and everything cause he gave me the headliner and a bunch of other stuff for $20. What owner loves best about CC The multitude of CC members that helped a MJ newbie out for the past 2 years. :thumbsup: PICS! ----------------------------------------------------------------------------------------- Yet another example of an outstanding member. Not only an outstanding build, but the walk-throughs of the dome lights, the door panels, basically every minute detail that you honed in on when you were building your truck. I can't tell you how many people I have steered towards your threads for help that I know they will understand. No stone went unturned in the build of your truck, everything got that special touch. I love that split interior, and would have never thought of doing that. I can see the inspiration that you give to other members in the comments and the amount of people following your build. I only wish one of my trucks could even come close your caliber of detail. AnotherJeff's build thread: viewtopic.php?f=7&t=16945 I am happy to be the first to congratulate you on your MJOTM honor. Well done sir, keep up the good work. Rob L. :cheers:

Here's a little porn for ya! Rob L. :D

So far 5/92 is the latest. 5-3-92 to be exact. Rumored the last one rolled off on 5-18-92 according to a book or two. Have yet to see any past 5/3. I have a 4-24-92. Rob L.