Casper2000

Talk to a guy named Ken at Novak adapters. Dude really knows his stuff. If not talk to Eric he's the owner

You are on to a great project if you do this be sure you have another car to run for one cause its not going to happen over night. For two have lots of money Cause i havent ran into anything cheap yet on my build. Get some good headers About $200 + Great rad $600+ two 10" e- fans $60+ each. Thats just the start.

Even with out the AC junk in their ? Crap :wall:

After much debate i pulled out the AC/ Heater box from under the dash. Does anyone know if the Heater Box with out air is the same size or smaller. Who needs AC anyway :rotf:

PM sent back Oh forgot to ask about your steering link's also. :doh:

I want your lift kit :wavey: Let me know if you want to sell it.

I guess we will all be driving for a distance to meet up. Should we put it to a vote as to where we need to meet up and when. 87warrior and i are only like two hours away, and we can hit up tuttel creek orp. Everyone eles is more then a full tank away from the park.

Hey girsmj86 We tried to get a rub of those decales but their just one big sticker no texture to pickup the distance between the lines. After some thought we are going to set a tape measure on them and see if i can get some good shots of the lines with the mesurments betwwen the lines and what not. Drop me a pm if you don't think this will work or if you have a better idea

What !! Wait there's girls on here :waving: No one told me this i would have been a bit more refined on some of my comments. Sorry girl's :doh:

Whats the differince between the jk and tj d44 front mines out of a rubi and my rims fit fine?

Eagle Now that some one has started this for me I'm going to jump in and ask the same question. With this LS1 and tb350 tranny 31" tires am i good with 4.10's myself. Didnt mean to hijack your thread.

Sorry i read it and thought of my sisters grand cherokee hers was always in 4WD only had i think part time full time Neutral and 4 low I thought it was a 242 :doh:

:nuts: Why would you go from selectable 4WD to full time? Your fuel milage is going to drop like a stone.

I don't know. I can't check it at work...... :dunno: :hmm: I hope they stay this time

I'm sorry but he has a point why name them ? Yea i named mine but it wasnt buy choose it kind of is a Frankienstien 2 parts chevy i part from a wrangler another from an 83 cherokee. So it is just like frankienstien :chillin:

Sure looks like it to me. Thats what i got under mine..

Thats it :bowdown: I was thinking about doing that.

Ill do my best not to let you guys down. I just want a chance to put it up against one that has a ford power plaint just to shut them up about how good ford is :fool:

Yea i was thinking about that :hmm: Only problem i need to figure out is what type of reinforcement is needed plate or that hole with the pipe welded in between the outside's of the rail. I have seen a pic on here where someone had done it but can't find it now. I'm more concerned with where it is most more prone to fail. I think CW kind of pointed out where i need to focus a bit of attention between the bed and cab. Thanks for your input none the less this is my first unibody build and I'm not to sure what is going to take or not take.

I can't find a good place for us to meet up at anytime in the future. 87Warrior and bpm4x4 are some what close but its still a good drive to the Ozarks. Any ideas ??

Not to much to update still waiting for parts to come in :( so i took the time to work on the inside for a bit. I had been working on the center console for a few days here and their and finally started to get somewhere with it. I'm starting to have this thing for chrome i found a bunch at a scrap yard for next to nothing so i picked up the biggest piece's i could find after maybe $35 i had a 4'x 4' piece plus abit more medium sized one's. This is what i have put together so far. Its not bolted down or anything yet cause there is more of it to come i ll work on it as time allows comes i still need to figure in space for the B&M Z gate shifter thats a waiting it's home. Also got the new track bar in now if the guy would finish the Dana 44 i can get it put on and start getting the drive line made.

Darren :fool: Good greif man. :rotfl2:

Yea ill send the wife to walmart for the stuff we need and get on them tonite. I am going to assume you want both sides. :chillin:

I think i have what you need. Look at project Frankienstien under MJ builds and if thats it let me know and ill have to get some stuff to get them traced for ya.

Only 34 over here :clapping: