Drahcir495

No, I have not :cheers: . Makes perfect sence - thank you!

What is the deal with these :fs1: 'n things. I can't get it to work. I used a piece of wire and steel sleeve for a temp fix -> It works but just looks Jerry Rigged. Any one else come up with an ideal to get them to work properly? Thanks, Rich

I have tweak and tightened the tilt mechanisms a few times to get them to work properly. Today I finally had enough of trying to no avail, to get behind my seats :fs1: . I grabbed some wire and a metal sleeve and made a handle, so I can manually override the %$@*&$# tilt lever. -> Installed -> I am going to use this as a temporary fix until I can come up with something better. It will probably end up being the only fix :yes: . It works great.

Sorry to hear that :fs1: , but did it have to be in Florida :shake: . I hope you catch the idiot. Keep us posted.

Welcome to the club :cheers: . Great looking original MJ you have there. I would just get the factory door seal from a newer XJ - they are a better design and a few of us on here have had awesome results with them. On the rear bumper: It is a shame you can't get a factory replacement, they really look good. I would suggest a better built after market bumper. JCR, Detours, Tomken, and my favorite PROTOFAB :bowdown: . Actually, IIRC $500MJ (CC member) has a real nice custom bumper for just a little more than the one you are looking at. I would start looking through the rest of the MJ project threads on here. It is amazing what some of the members have accomplished. Great back story on the MJ and glad to have you here - Rich

They used to be in the Quadratec Essential for Jeep Cherokee catalog. I think the company was Smitty Built and they sold the side peices too.

Wow, you got a lot done on one page ;) . Too bad about the original hood and fender :nuts: . The PO obviously was not a member of CC, or he would have read the "what to do if you hood latch breaks" sticky. MJ looks great and love the black interior :cheers: .

Ooooh, stocking stuffers :banana: . Merry Christmas everyone

I agree 100% - but with this designed you would be able to place jerry cans and supplies back there. Thank you CW. The bumper is more than I could have hoped for. Protofab did an amazing job designing this bumper. I just need to get on Mike's arse about completing the rock rails :brows: . Merry Christmas everyone :typing: !

I like the rims! Bigger meats on them and they will be perfect. Truck looks great :thumbsup:

I started working on upgrading the headlight wiring harness following this guys instructions - > http://fitchva.com/jeep/?p=57. I am almost done with it .

I figured out what I could do with the empty hole now that I will only occasionally be using the swing out tire carrier – a CB antenna location. Stopped by Radio Shack and picked up a CB antenna mount -> It fit in the hole like a glove -> Slapped a coat of paint on it -> The upper mount adds a bit of protection also -> The spot could be used for an ORV park flag as well. I took this opportunity to paint up the license place bracket -> . . . and to turn it 180 degrees to provide a bit more clearance and protection -> I couldn’t ask for a better fit & I was able to do it without re-welding ->

I think you are giving project88mj a run for the Zoolander title :yes: . Nah, he has that locked down. But now I do believe you could have a career as a LL Bean jacket model :cheers: Cool jacket by the way - looks like a Carhartt.

You do that like this... http://www.comancheclub.com/forums/viewtopic.php?f=7&t=12948] YOUR WORDS HERE Without the colors & spaces..yYou will get this... YOUR WORDS HERE 92comanche4x4 thanks for asking that :thumbsup:, I did not have the to ask myself. You are the man BLHTAZ :cheers:

Mmmm, Florida baked goods! I hope that mouse wasn't Mickey, it will crush Pete :( .

I will have the swing arm off the bumper 98% of the time, so I am forced to find another location. :cheers:

I can take it off any time I need to. It is held in like any other hitch - with a pin. I think I am going to turn it upside down, since the swing arm is not on it, and see if that helps. I think that is a great idea about the 45 degree position. james750 - I would give Mike a call. I will be emailing Mike about that, and my new LWB sliders :brows: . I will let you know what he says. He does make them - there are two CC members that have them now.

The bumper is on and it s ! Just have to get the jeep painted now :shake: . More pictures are on the last page of my build-up.

I was able to get the bumper on this week. I just think it is awesome. I made a license plate holder out of 2" receiver hitch & steel - it looks pretty good. The swing out tire carrier is amazing. I have decided to use it only when I am going camping or trail riding. I am not able to see who is coming up behind me (in the rear view mirror) with that big 33 inch tire on there - it looks tough on it though. I am going to use the hole for the swing arm bolt for my cb antenna. Here are a few shots ->

:agree: Mine was maroon - out of an XJ with auto. I just painted it with SEM black paint.

I called around on pricing to have the rear bumper powder coated. I was thinking if I could get it for around 100 bucks, I could not pass it up . At that price I would rather have it professionally coated then try and paint it myself. I got a quote from a guy in my business park - $250. Dang that seemed expensive, but I am a cheap guy. Called a place I used 6 years ago - $330 :fs1: ! At this point I am pretty certain I would have to paint it myself until Wingtime suggested I call a place around the corner from him. Buddy you came through again! I described the two pieces of the bumper and she said $75.00!!!! Oooh yeah ! I brought it down to DPS Powder Coating last week and this Tuesday it was ready. It looks great. I just got the bumper mounted tonight with some grade 8 hardware, but it is too dark out to get some quality pictures. I will get plenty of pictures posted this weekend of it in place. Here are a few pictures of the bumper after the powder coating but not installed -> /uploads/archive/d1d1f007ff2e0e0e850829beea2fff7b/0152d30298755bd0dbd12f17ee4b0e4b.jpg /uploads/archive/d1d1f007ff2e0e0e850829beea2fff7b/61b49cd0937546eaff16d2dc71b378de.jpg /uploads/archive/d1d1f007ff2e0e0e850829beea2fff7b/2f18ae27099cb43ba53743cedcc9aa88.jpg Swing out tire carrier -> /uploads/archive/d1d1f007ff2e0e0e850829beea2fff7b/21defefb962b978d3948c19c58dd5a00.jpg TBC

:( Sorry to hear that.

Those small issues aside (spacers and shackles are easy fixes), it looks like you have found a deal. The body looks solid too. I like that you have already started to upgrade it :thumbsup: . Welcome to the club :cheers: - Rich

Those small issues aside (spacers and shackles are easy fixes), it looks like you have found a deal. The body looks solid too. I like that you have already started to upgrade it :thumbsup: . Welcome to the club :cheers: - Rich

Yes but Chico has been MIA for a while now... rumor has it he went to Hollywood to become a star!!!! Heard he was just in his first movie "Pipe Layers" staring him and Linda Lovelace... ...... here's one of his lines... (two loud knocks on the door) LL- "hello" C- "Did someone call a plumber?" LL- "I didn't call a plumber" ...... (start music over score) Boom shanka bow wow shanka whaaa.............. I guess he finally got his dream job.... Yeah the tan couch is kinda iffy,,, just a warning... Welcome to ComancheClub!!! :wavey: :rotfl2: :yes: :rotf: Welcome to the club :waving: . Stay away from the couch and these two posters above :brows: