Pete M Posted April 9, 2011 Share Posted April 9, 2011 Here ya go Rob, some decent photos of your new baby. :D feel free to swing by anytime and pick her up. :thumbsup: and because I can't just leave my truck naked (my bumper was part of the swap and the local code guy already has it in for me :fs1: ) (the winch is in the garage) any questions? :D Link to comment Share on other sites More sharing options...
maddzz1 Posted April 9, 2011 Share Posted April 9, 2011 Thats probably the only one in the country. You would think Jeep would have actually spent a little money and designed a different bumper for the winch option. Instead of just tacking on some extra stuff to fill in the gaps. Link to comment Share on other sites More sharing options...
Pete M Posted April 9, 2011 Author Share Posted April 9, 2011 nah, there are a handful of others out there. but they are rare enough that it's the only one I've ever seen with my own eyes. :yes: Link to comment Share on other sites More sharing options...
jeepdoggydogB Posted April 9, 2011 Share Posted April 9, 2011 :bowdown: Excellent find, it looks like it has the original winch! If so rebuilding that is a must. Link to comment Share on other sites More sharing options...
whowey Posted April 9, 2011 Share Posted April 9, 2011 So the side brackets are just the tow hook brackets, with the bumper mount in a different place. A winch set-up for a ARB bumper would be set-up to pull exactly the same way(out the bottom of the winch).... Link to comment Share on other sites More sharing options...
terrawombat Posted April 9, 2011 Share Posted April 9, 2011 Wow, those side brackets seem pretty wimpy for a winch mount. I figured they'd be a little more beefy like the mounts I've got brewing: Link to comment Share on other sites More sharing options...
btm24 Posted April 9, 2011 Share Posted April 9, 2011 Its just sad that you had to take it off of the truck it came off of. Link to comment Share on other sites More sharing options...
Automan2164 Posted April 10, 2011 Share Posted April 10, 2011 If you saw the condition of the truck, you wouldn't be so sad. At one time it was most likely a nice MJ, but that one time was a few owners ago... Better to save what you can and say goodbye. Rob Link to comment Share on other sites More sharing options...
neohic Posted April 10, 2011 Share Posted April 10, 2011 and because I can't just leave my truck naked (my bumper was part of the swap and the local code guy already has it in for me :fs1: ) I dunno... looks just as good on your truck as it would on Rob's! :D Link to comment Share on other sites More sharing options...
jons87mj Posted April 10, 2011 Share Posted April 10, 2011 :bowdown: i love it :bowdown: Link to comment Share on other sites More sharing options...
Automan2164 Posted April 10, 2011 Share Posted April 10, 2011 With those little brackets on the bumper, one has to wonder if it had a factory brushguard also... Anyone know how those mounted? Rob Link to comment Share on other sites More sharing options...
neohic Posted April 10, 2011 Share Posted April 10, 2011 ^Those mount on with the factory tow hooks. The brush guard gets sandwiched between the the hook itself and the bracket. Kinda janky if you ask me and not overly strong. Link to comment Share on other sites More sharing options...
btm24 Posted April 10, 2011 Share Posted April 10, 2011 If you saw the condition of the truck, you wouldn't be so sad. At one time it was most likely a nice MJ, but that one time was a few owners ago... Better to save what you can and say goodbye. Rob Yeah I also saw it in the add but still its sad :( Brandon Link to comment Share on other sites More sharing options...
Pete M Posted April 10, 2011 Author Share Posted April 10, 2011 Wow, those side brackets seem pretty wimpy for a winch mount. I figured they'd be a little more beefy like the mounts I've got brewing: it's only a 6k winch. Link to comment Share on other sites More sharing options...
terrawombat Posted April 10, 2011 Share Posted April 10, 2011 Based on the calculations I've done I don't even know if those brackets would hold up in certain situations Link to comment Share on other sites More sharing options...
Pete M Posted April 10, 2011 Author Share Posted April 10, 2011 it's designed for bone stock rigs. also, it's made by amc. the stuff they built was either bulletproof, or it might kill you. :dunno: With those little brackets on the bumper, one has to wonder if it had a factory brushguard also... Anyone know how those mounted? Rob I can see the little brackets on the front of your bumper in the brochure photo of the brush guard. same location anyway, though they look slightly different in the photo. I'll post the pic tomorrow. also, this is the 6k lightweight model. there was also an 8k version. Link to comment Share on other sites More sharing options...
JeepcoMJ Posted April 10, 2011 Share Posted April 10, 2011 week and flimsy. I'm going to clone that for the 3800, using a '97 front bumper...but stronger brackets. and you're damn right that wouldn't hold up. try a side pull with the fair lead running through that flimsy stamped sheet metal bumper... Link to comment Share on other sites More sharing options...
Pete M Posted April 10, 2011 Author Share Posted April 10, 2011 your bracket seems to be in the same spot, but looks a bit longer on the bumper leg. Link to comment Share on other sites More sharing options...
Automan2164 Posted April 10, 2011 Share Posted April 10, 2011 Yep. I wonder what that truck looked like when it left the dealer's lot back in the day. Must have been one heck of a beautiful sight, with one proud owner behind the wheel. Brushguard, hidden winch... Who knows what else they might have checked... D44? 4.10's? LSD? Damn shame. Rob :( Link to comment Share on other sites More sharing options...
btm24 Posted April 10, 2011 Share Posted April 10, 2011 I would guess something like this (com_mako truck): Pete, did you get any info like the vin off of the truck when you went there? Brandon Link to comment Share on other sites More sharing options...
Eagle Posted April 11, 2011 Share Posted April 11, 2011 So the side brackets are just the tow hook brackets, with the bumper mount in a different place. Yes. If you look closely, the factory tow hook brackets (unlike the aftermarket brackets from Rusty's, C4x4 and Quadratec) have two sets of mounting holes. One set is for a standard setup, the other set pushes the bumper forward by 4 inches (or is it 6 inches?) to make room for the winch. The winch plate itself actually mounts through the standard bumper bracket holes in ends of the uniframe ears. Link to comment Share on other sites More sharing options...
Eagle Posted April 11, 2011 Share Posted April 11, 2011 also, this is the 6k lightweight model. there was also an 8k version. Are you sure about that? The only references I've ever seen were for 5000 pounds or 6000 pounds. Link to comment Share on other sites More sharing options...
87Warrior Posted April 11, 2011 Share Posted April 11, 2011 Finally, some detailed pictures of the setup! Seems like nobody else ever wanted to share. Can you tell how the spool leaver was accessed when on the truck? I assume through the opening on top of the bumper, but I want verification. Is the fairlead centered on the bumper? Is the space left on top of the bumper offset to one side of the other? Link to comment Share on other sites More sharing options...
Pete M Posted April 11, 2011 Author Share Posted April 11, 2011 no, I completely got distracted by the winch and forgot to grab the vin. :( also, this is the 6k lightweight model. there was also an 8k version. Are you sure about that? The only references I've ever seen were for 5000 pounds or 6000 pounds. got the numbers from the 86 accessories brochure. :dunno: Finally, some detailed pictures of the setup! Seems like nobody else ever wanted to share. Can you tell how the spool leaver was accessed when on the truck? I assume through the opening on top of the bumper, but I want verification. Is the fairlead centered on the bumper? Is the space left on top of the bumper offset to one side of the other? I'll get that info when I get back home. Link to comment Share on other sites More sharing options...
Eagle Posted April 11, 2011 Share Posted April 11, 2011 Finally, some detailed pictures of the setup! Seems like nobody else ever wanted to share. Can you tell how the spool leaver was accessed when on the truck? I assume through the opening on top of the bumper, but I want verification. Is the fairlead centered on the bumper? Is the space left on top of the bumper offset to one side of the other? The fairlead and top access were centered. The winches were "clocked" 90 degrees, so the mounting feet were pointed back toward the radiator and the operating lever was facing up. I didn't see any on the 2010 trip to Chile for Christmas, but the last time I was there (a few years ago) it seemed like every Cherokee I saw had the hidden winch. There's some quirk in their registration laws that a vehicle with a winch gets classified as a work truck and pays lower taxes, so it was a popular option. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now