mknherhappy Posted June 6, 2008 Share Posted June 6, 2008 Did Jeep make a roll bar for the Comanche? If not, what roll bar fits? Are there new ones out there? Thanks again. Link to comment Share on other sites More sharing options...
maddzz1 Posted June 6, 2008 Share Posted June 6, 2008 Yes they did come with an optiomal roll bar. I don't think you will be able to find a new one but they do come up for sale now and then. Link to comment Share on other sites More sharing options...
Pete M Posted June 6, 2008 Share Posted June 6, 2008 Most any rollbar out of a small pickup should work just fine. The aftermarket bars are made to bolt into multiple rigs. Factory MJ bars do not interchange between longbed and shortbed though, due to the rear bars bolting to the angled front of the wheelwells. Aftermarket bars usually bolt to the top of the wheelwell, or to the floor of the bed. Please don't think that any factory or aftermarket show bar will actually save you life in the event of a rollover. Link to comment Share on other sites More sharing options...
mvusse Posted June 6, 2008 Share Posted June 6, 2008 Everybody wants them, not a lot of people have them. Good luck! Be aware that the short bed and long bed roll bars are different. Also, if your Jeep came with one from the factory, it has extra supports under the bed floor tying to roll bar into the frame. For a functional roll bar that is a must. If you just want it for looks or to mount light, well, I've even see ones made out of PVC pipe! Link to comment Share on other sites More sharing options...
mknherhappy Posted June 6, 2008 Author Share Posted June 6, 2008 Will a Ford Ranger or S10 roll bar work? Link to comment Share on other sites More sharing options...
mjdoa Posted June 6, 2008 Share Posted June 6, 2008 Just for general jollies,mine came with one,it's gone,I looked for a long time.Found one and one only.A salvage yard in Cal. that specializes in jeep parts.They wanted $150,but since I'm in So Fla,I figured the freight would be prohibitive,I probably still have their name and stuff somewhere if you want it. Link to comment Share on other sites More sharing options...
BLHTAZ Posted June 6, 2008 Share Posted June 6, 2008 Will a Ford Ranger or S10 roll bar work?Mine is out of a 2001 Ford Ranger... Link to comment Share on other sites More sharing options...
DirtyComanche Posted June 7, 2008 Share Posted June 7, 2008 I could probably make a small fortune reproducing the originals. Seems like people want them. Other than for me to ship them to anybody would be retarded expensive. Link to comment Share on other sites More sharing options...
89eliminator Posted June 7, 2008 Share Posted June 7, 2008 you get rollbars from the rollbar store, duh! :D nah, factory ones are hard to come by (at least in my area). I got mine from a first gen Dodge Dakota. It doesnt bolt directly in, but was easily modified to fit. Link to comment Share on other sites More sharing options...
CWLONGSHOT Posted June 7, 2008 Share Posted June 7, 2008 Mine is also from a Ford Ranger. But its a SPLASH version, much narrower than a reg Lil truck bed. So I cut and added tubing to make it the width I wanted. Then I cut and adjusted the back bars to sit where I wanted as well. I think it came out pretty well. If I where to do it again, I would look for a Dakota bar, maybe even buy it new for a Dakota. CW Link to comment Share on other sites More sharing options...
Orko1978 Posted August 2, 2022 Share Posted August 2, 2022 I'm scooping up one of these, black ||https://www.carid.com/1986-jeep-comanche-truck-bed-accessories/go-rhino-bed-bars-4927217856.html || Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now