ghetdjc320 Posted April 20, 2022 Share Posted April 20, 2022 Was about to finalize the design for the “Jeep” center cap logos to restore my turbine wheel caps. The original label was a very typical reverse screen print on a piece of clear plastic. The “Jeep” lettering was clear but I wasn’t sure if the base that it glued to was chrome or silver. Just want to make sure I get the right color on the “Jeep” lettering. The new ones I’m making will have a super strong outdoor adhesive and a thick UV coating with UV stable ink. Any input on what these should have looked like new would be great Link to comment Share on other sites More sharing options...
eaglescout526 Posted April 20, 2022 Share Posted April 20, 2022 Hopefully someone with a NOS one will chime in as I have a few caps that need repaired. I am willing to bet they relied on the chrome behind the logo if the logo really is clear. Link to comment Share on other sites More sharing options...
ghetdjc320 Posted April 20, 2022 Author Share Posted April 20, 2022 1 hour ago, eaglescout526 said: Hopefully someone with a NOS one will chime in as I have a few caps that need repaired. I am willing to bet they relied on the chrome behind the logo if the logo really is clear. I think your right. The clear plastic has yellowed from the sun but here is a shot of the back side. You can see where the chrome plating from the turbine cap came off onto the backside of the badge Link to comment Share on other sites More sharing options...
eaglescout526 Posted April 20, 2022 Share Posted April 20, 2022 Sure looks like it. Sounds like a cheap AMC way to do it haha. I’ll be keeping my eyes peeled for the production of these. Link to comment Share on other sites More sharing options...
Pete M Posted April 20, 2022 Share Posted April 20, 2022 are you asking if the letters are chrome or silver? if so, they are reflective enough that I'd call them chrome. but they aren't a smooth surface if that matters. more of an orange peel texture. it's super hard to film it. Link to comment Share on other sites More sharing options...
ghetdjc320 Posted April 20, 2022 Author Share Posted April 20, 2022 Thanks Pete, that will work. I’ll go with a bright silver/chrome. Link to comment Share on other sites More sharing options...
ghetdjc320 Posted October 17, 2022 Author Share Posted October 17, 2022 Quick update: here is a design I ended up setting on. These are a bubble design so they aren’t an exact replica of the turbine wheel caps. I have a sample batch of these I’m trying but I can make slight variations if anyone wants some. Link to comment Share on other sites More sharing options...
pizzaman09 Posted October 18, 2022 Share Posted October 18, 2022 Any chance those would fit Eliminator 10 hole wheels? Link to comment Share on other sites More sharing options...
ghetdjc320 Posted October 18, 2022 Author Share Posted October 18, 2022 2 hours ago, pizzaman09 said: Any chance those would fit Eliminator 10 hole wheels? I can make them in almost any size if you get me the dimensions Link to comment Share on other sites More sharing options...
pizzaman09 Posted October 18, 2022 Share Posted October 18, 2022 8 hours ago, ghetdjc320 said: I can make them in almost any size if you get me the dimensions Are these just the sticker that goes on the cap or the whole cap? I'm missing a couple of the caps. Link to comment Share on other sites More sharing options...
ghetdjc320 Posted October 18, 2022 Author Share Posted October 18, 2022 1 hour ago, pizzaman09 said: Are these just the sticker that goes on the cap or the whole cap? I'm missing a couple of the caps. They are the center stickers that go on the caps. These are for my turbine caps but I can resize to fit others as well. Link to comment Share on other sites More sharing options...
87MJJeep Posted October 19, 2022 Share Posted October 19, 2022 I'm a definite buyer for the size made for 10 hole Eliminator wheels. The entire cap is approximately 64 mm in diameter. The center part is approximately 43 mm. Please let me know if you need more detail or better photos. Link to comment Share on other sites More sharing options...
motownXJdad Posted October 19, 2022 Share Posted October 19, 2022 id really be interested in white onrs so i can add red and blue like these Link to comment Share on other sites More sharing options...
ghetdjc320 Posted October 20, 2022 Author Share Posted October 20, 2022 16 hours ago, 87MJJeep said: I'm a definite buyer for the size made for 10 hole Eliminator wheels. The entire cap is approximately 64 mm in diameter. The center part is approximately 43 mm. Please let me know if you need more detail or better photos. Is the 43mm portion removable? Maybe with a razor blade? If so, the design is very similar to the ones I’m making for the turbines. Is the lettering silver or chrome? Link to comment Share on other sites More sharing options...
ghetdjc320 Posted October 20, 2022 Author Share Posted October 20, 2022 13 hours ago, motownXJdad said: id really be interested in white onrs so i can add red and blue like these So do you want ones that look like the small pics or the larger one? Or do you want the larger one to just say Jeep instead of amx? Link to comment Share on other sites More sharing options...
motownXJdad Posted October 20, 2022 Share Posted October 20, 2022 2 hours ago, ghetdjc320 said: So do you want ones that look like the small pics or the larger one? Or do you want the larger one to just say Jeep instead of amx? id prefer the larger one with "Jeep" scipt instead of AMX, also to fit 10 hole Eliminators Link to comment Share on other sites More sharing options...
87MJJeep Posted October 20, 2022 Share Posted October 20, 2022 4 hours ago, ghetdjc320 said: Is the 43mm portion removable? Maybe with a razor blade? If so, the design is very similar to the ones I’m making for the turbines. Is the lettering silver or chrome? I am not sure about the smaller section being removable. I hope someone that has messed with theirs before chimes in. I think the lettering is silver. Link to comment Share on other sites More sharing options...
fiatslug87 Posted October 20, 2022 Share Posted October 20, 2022 Yes, the logo is removable Link to comment Share on other sites More sharing options...
87MJJeep Posted October 20, 2022 Share Posted October 20, 2022 3 hours ago, fiatslug87 said: Yes, the logo is removable That's good to know! Link to comment Share on other sites More sharing options...
acfortier Posted December 9, 2022 Share Posted December 9, 2022 @ghetdjc320 are you planning on making/selling these? Washed my turbines today and one of mine blew off, lol Link to comment Share on other sites More sharing options...
ghetdjc320 Posted December 9, 2022 Author Share Posted December 9, 2022 45 minutes ago, acfortier said: @ghetdjc320 are you planning on making/selling these? Washed my turbines today and one of mine blew off, lol I’d love too. I have everything sourced, I’m just on a full on marathon build at the moment. These side projects have really gotten pushed to the back burner. Been trying to knock out some switch trim covers also. It will happen eventually though. I’m guessing maybe 2-3 months?? Link to comment Share on other sites More sharing options...
acfortier Posted December 9, 2022 Share Posted December 9, 2022 9 hours ago, ghetdjc320 said: I’d love too. I have everything sourced, I’m just on a full on marathon build at the moment. These side projects have really gotten pushed to the back burner. Been trying to knock out some switch trim covers also. It will happen eventually though. I’m guessing maybe 2-3 months?? No worries! I'll keep an eye out Link to comment Share on other sites More sharing options...
87MJJeep Posted December 13, 2022 Share Posted December 13, 2022 On 12/8/2022 at 9:15 PM, ghetdjc320 said: I’d love too. I have everything sourced, I’m just on a full on marathon build at the moment. These side projects have really gotten pushed to the back burner. Been trying to knock out some switch trim covers also. It will happen eventually though. I’m guessing maybe 2-3 months?? Very cool! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now