Jump to content

Cant find trim retainers


Recommended Posts

Was wondering where I can find a bundle of these interior plastic trim retainers? Not sure what they're called.

About 3/4" long

Head about 1/2" 3aa66888f729447a0c7afe322e33107c.jpgc60fa37d9221fedca7ba72cb2d1f3cbb.jpg34a09d79bef3bc371ea03b4d68b291d6.jpg

 

1986 Jeep Comanche X

4WD GM 2.8L V6

Front: Stock Dana 30

Rear: Stock AMC 20

Los Angeles CA

 

Sent from my SM-G955U using Tapatalk

 

 

Link to comment
Share on other sites

Ah. They start with a 650 number. Chrysler still has them but they should be readily available after market. 
Can you post a link to them like Amazon or Ebay please

1986 Jeep Comanche X
4WD GM 2.8L V6
Front: Stock Dana 30
Rear: Stock AMC 20
Los Angeles CA

Sent from my SM-G955U using Tapatalk

Link to comment
Share on other sites

16 minutes ago, marcial88 said:

Can you post a link to them like Amazon or Ebay please emoji1417.png

1986 Jeep Comanche X
4WD GM 2.8L V6
Front: Stock Dana 30
Rear: Stock AMC 20
Los Angeles CA

Sent from my SM-G955U using Tapatalk
 

 

Gladly, I’m just away from my computer at the moment but will do some research for ya!

Link to comment
Share on other sites

Link to comment
Share on other sites

Almost any auto parts store carries them in the hardware section. Auto glass shops also normally carry a huge selection of those clips since they deal with trim panels every day. 
I'll head over to autozone o'Reilly and napa later today. Thanks.

1986 Jeep Comanche X
4WD GM 2.8L V6
Front: Stock Dana 30
Rear: Stock AMC 20
Los Angeles CA

Sent from my SM-G955U using Tapatalk

Link to comment
Share on other sites

Those are dealer only. Auto parts store stuff is close but not exact. I think you'll find you need to trim the top of most anything you find of the same diameter to fit in the trim pieces retainer-slot.

 

Link to comment
Share on other sites

Those are dealer only. Auto parts store stuff is close but not exact. I think you'll find you need to trim the top of most anything you find of the same diameter to fit in the trim pieces retainer-slot.
 
That's a good idea. I'll find something similar trim if I have to and give it a try.

1986 Jeep Comanche X
4WD GM 2.8L V6
Front: Stock Dana 30
Rear: Stock AMC 20
Los Angeles CA

Sent from my SM-G955U using Tapatalk

Link to comment
Share on other sites

My nearest Ace Hardware has them in their Hillman section, nuts, bolts, screws and all that jazz. Faster than online, and I get 20 percent off, so probably not any more expensive. Probably find them at the big box Home Improvement places, too.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...