pitbull4x4 Posted January 18, 2015 Share Posted January 18, 2015 I'm doing the 4wd swap and having new floors, inner and outer rockers, and cab corners put on I don't want them messed up. So I would like to see pictures of rock rails and how you mounted them. Thanks Link to comment Share on other sites More sharing options...
mnkyboy Posted January 18, 2015 Share Posted January 18, 2015 Mine are welded over the rockers. Link to comment Share on other sites More sharing options...
daking Posted January 19, 2015 Share Posted January 19, 2015 I'm thinking of doing the same thing, so I'll follow this thread . mnkyboy, thats some crazy flex! I hope my Comanche can do that. Does the front spring re-seat on its own when it lowers back? Link to comment Share on other sites More sharing options...
mnkyboy Posted January 19, 2015 Share Posted January 19, 2015 That was right after I built the suspension, I had just pulled it out to check some clearances. Once its all set up and the shocks are in it shouldn't go quite that far. Link to comment Share on other sites More sharing options...
Pete M Posted January 19, 2015 Share Posted January 19, 2015 I cut through my frame and ran the supports through it. doesn't touch the rockers, strong as hell, and is a frame strengthener too. Link to comment Share on other sites More sharing options...
ComancheKid45 Posted January 19, 2015 Share Posted January 19, 2015 Rocky Road sliders simply welded to the unibody and pinch seam. Link to comment Share on other sites More sharing options...
Incommando Posted January 19, 2015 Share Posted January 19, 2015 I cut through my frame and ran the supports through it. doesn't touch the rockers, strong as hell, and is a frame strengthener too. Love that idea Link to comment Share on other sites More sharing options...
ggcnash Posted January 19, 2015 Share Posted January 19, 2015 Rocky Road sliders simply welded to the unibody and pinch seam. could we get some more shots those look good Link to comment Share on other sites More sharing options...
ComancheKid45 Posted January 20, 2015 Share Posted January 20, 2015 Best i can do, i don't have any shots of the underside currently. Link to comment Share on other sites More sharing options...
Blue88Comanche Posted January 20, 2015 Share Posted January 20, 2015 :popcorn: Link to comment Share on other sites More sharing options...
cody4359 Posted January 23, 2015 Share Posted January 23, 2015 Bolts onto the uni body rail and about every 6" on the pinch seam. I haven't shock tested by dropping onto a rock, but I've picked up the whole side of the jeep quiet a few times with no flex Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now