carnuck Posted September 1, 2013 Share Posted September 1, 2013 I saved a few parts to sell/trade. Some blue interior stuff (moldings from the sides and back of the cab), the engine wiring harness $100, ebrake pedal $35, gas tank with fuel pump $50 (long box), tail lights $40 the pair (didn't save the harness this time), dark blue carpet (I just dried it out from last weeks rain. If no offers, I may put it in my truck after shampooing it), side vent covers $10 I saved the motor and trans too, but the 4.0L HO motor is just a core (I think my buddy is going to build his stroker with it) The 2wd AW4 may go into my '83 J10 so I can drive it before the end of the year or the snow flies (whichever comes first). driveshaft is spoken for Link to comment Share on other sites More sharing options...
carnuck Posted September 1, 2013 Author Share Posted September 1, 2013 I got $250 for the body for scrap (loaded with other junk from around here after I pulled the motor out) Link to comment Share on other sites More sharing options...
brokenbird Posted September 1, 2013 Share Posted September 1, 2013 Do you have the seat brackets? Link to comment Share on other sites More sharing options...
carnuck Posted September 1, 2013 Author Share Posted September 1, 2013 I will have a set off mine. It's bench seat though. My friend has buckets that can go with it. I forgot to mention it's column shift. Link to comment Share on other sites More sharing options...
87manche1 Posted September 1, 2013 Share Posted September 1, 2013 Ignore I saw your other post Link to comment Share on other sites More sharing options...
HOrnbrod Posted September 1, 2013 Share Posted September 1, 2013 You must name a price for your item(s) as per the rules. Link to comment Share on other sites More sharing options...
carnuck Posted September 1, 2013 Author Share Posted September 1, 2013 Oops! Sorry Don. Asking $500 complete (less the seat, but including the non-vacuum front axle with 3.55 ratio) or less without the motor/trans. I'm going to work on firing it up Wednesday. It has different wheels than it does in the pic too. 2 are chrome. It comes with several header panels, grills and spare front signals. Link to comment Share on other sites More sharing options...
skidoo_j Posted September 2, 2013 Share Posted September 2, 2013 It appears to have a clean spot where the roll bar would have gone, so did it have a roll bar? DOes it still have the under bed frame tie in brackets. IF it does I want them1!!! Link to comment Share on other sites More sharing options...
GirsMJ86 Posted September 2, 2013 Share Posted September 2, 2013 Since you're using the bumper and lights, the only thing I'd really be interested in is the tailgate depending on the shape of it. Looks relatively straight from the pics? I could only imagine the shipping though. What color interior? Link to comment Share on other sites More sharing options...
carnuck Posted September 5, 2013 Author Share Posted September 5, 2013 Tailgate is so-so. Not rusty but it has a slight load curve. Interior is blue. It has a nice chrome front bumper. I just kept the extended front bumper in the pic for mine. I also have a black bumper about to come off mine! today's pic as I towed it from the garage I can no longer afford to rent. Image Not Found No rollbar AFAIK? I'll be dropping the fuel tank. Link to comment Share on other sites More sharing options...
carnuck Posted September 8, 2013 Author Share Posted September 8, 2013 Monday I haul it to the cru$her! I'm pulling the tank (pump works too. I emptied the fuel with it), chrome front bumper (swapping for my banged up black bumper tomorrow). I pulled most of the blue interior. Bench seat will go in mine after I clean it. I'm going to paint the ceiling panel (mine had a flag poorly glued to it). Image Not Found What a shame it's next to no rust (that's only surface rust in the pic. Nothing on the other side) $300 is what I'll get for it scrap (without the 4x4 front axle, motor/trans or fuel tank) Link to comment Share on other sites More sharing options...
Automan2164 Posted September 8, 2013 Share Posted September 8, 2013 If only you were closer. One of us rust belters would snap this up in the blink of an eye. Rob Link to comment Share on other sites More sharing options...
GirsMJ86 Posted September 8, 2013 Share Posted September 8, 2013 Hope you're pulling tail lights, rear flares, or anything else that might be useful down the road and are only getting harder to find that are MJ specific. Probably unlikely, but wouldn't happen to have a drivers side rear bumper end cap in that pile-o-parts would ya? That is if that is stuff you're getting rid of. If only you were closer. One of us rust belters would snap this up in the blink of an eye. Rob You can say that again, although nowhere to put a second rig is another of my issues. Otherwise I'd be making the trip to NC for a clean LWB parts rig for scrap price that has quite a few parts I want to swap mine out for and clean fenders/bed/rockers I could use. Link to comment Share on other sites More sharing options...
'87 fuel-miser Posted September 8, 2013 Share Posted September 8, 2013 someone grab this ... look how straight it is ! with minimal rust ... holy $#!& !!! :banana: . :MJ 1: . Link to comment Share on other sites More sharing options...
carnuck Posted September 8, 2013 Author Share Posted September 8, 2013 I gave the bumper to my son (bought a new one for mine that was strong enough to tow with) It's gone tomorrow AM. I'm pulling the tail lights (I used up almost all my spares) The tilt column shift (mine is sloppy and I think it's missing something) Rear flares are so/so and so is the tailgate (I'm torn about saving it. Dents and bent, but no rust) I saved the bench seat and carpet, and we threw in the buckets from my buddy's '89 XJ (none of the holes lined up) The wiring harness has no C101 connector and since it's auto, the fuse box isn't toast either. Link to comment Share on other sites More sharing options...
Mark Serva Posted September 13, 2013 Share Posted September 13, 2013 That's was a better looking MJ than 70% of them I see running around as work trucks. Sad nobody could come up with an offer close to this guy. Just sad for us MJ fans. Link to comment Share on other sites More sharing options...
92tanMJ Posted September 18, 2013 Share Posted September 18, 2013 save the tailgate and hang it on wall thats what I did Link to comment Share on other sites More sharing options...
HOrnbrod Posted September 18, 2013 Share Posted September 18, 2013 I bet carnuck still has it. Si Jim? Link to comment Share on other sites More sharing options...
carnuck Posted September 18, 2013 Author Share Posted September 18, 2013 I was boiling hot (it was 85) and I was too tired so it went Link to comment Share on other sites More sharing options...
jdappel Posted September 18, 2013 Share Posted September 18, 2013 I could use the "Comanche" fender emblems, if you saved them. Let me know. Thanks! Link to comment Share on other sites More sharing options...
carnuck Posted September 18, 2013 Author Share Posted September 18, 2013 I had planned to, but it got late and the junkyard was about to close so we were in a rush. By the time I undid all 4 tires, I could hardly stand! (forgot my power inverter so we did it by hand) Link to comment Share on other sites More sharing options...
Jrwhite3230 Posted September 18, 2013 Share Posted September 18, 2013 hello carnuck its good to meet you and I'm still not getting power to that pump I will check that switch you talked about see if that linkage (rod) has slipped out ,and if that doesn't do it its back to quare one again ill go through every ounce of hornbrod's and cruiser's page. I hope to resolve this !! ill post anything ive found thanks again!! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.